この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 9608 は、技術委員会 ISO/TC 41, プーリーおよびベルト (ビーベルトを含む) 、小委員会 SC 1, ビーベルトおよび溝付きプーリーによって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 9608:1988) を取り消して置き換えるものです。特に、ベルト上部の幅に関連する中心距離の変動の値が削除されました。
この国際規格の附属書 A は情報提供のみを目的としています。
序章
V ベルト ドライブの不規則な走行は、V ベルト セクションの不均一性から発生する可能性があります。これは、不均一性によって引き起こされる力の変動が、一定の中心距離での初期力に追加されるためです。
一定の測定力で V ベルトの長さをテストすると、これらの力の変動は中心距離の変動として現れます。
1 スコープ
この国際規格は、V ベルトの均一性の基準として、V ベルト ドライブの中心距離の変動を測定するための試験方法を規定しています。
2 定義
この国際規格の目的のために、次の定義が適用されます。
2.1
中心距離変動
ΔE
標準化された測定治具で測定された最大中心距離と最小中心距離の差。
附属書 A
参考文献
| [1] | ISO 1604:1989, ベルト ドライブ — 産業用変速機用エンドレス幅広 V ベルトおよび対応するプーリー用の溝プロファイル。 |
| [2] | ISO 2790:1989, ベルト ドライブ - 自動車産業用ナロー V ベルトおよび対応するプーリー - 寸法。 |
| [3] | ISO 3410:1989, 農業機械 — エンドレス可変速 V ベルトおよび対応するプーリーの溝セクション。 |
| [4] | ISO 4184:1992, ベルト ドライブ - クラシックおよびナロー V ベルト - データム システムの長さ。 |
| [5] | ISO 8419:1994, ベルト ドライブ - ナロー ジョイント V ベルト - 有効システムの長さ。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 9608 was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts), Subcommittee SC 1, Veebelts and grooved pulleys.
This second edition cancels and replaces the first edition (ISO 9608:1988), which has been technically revised. In particular, the values for the centre distance variations in relation to the belt top width have been deleted.
Annex A of this International Standard is for information only.
Introduction
An irregular running of V-belt drives can arise from non-uniformities in the V-belt sections because force variations induced by the non-uniformities add to the initial force at constant centre distance.
When testing the V-belt length under constant measuring force, these force variations appear as centre distance variations.
1 Scope
This International Standard specifies a test method for determining the centre distance variation of V-belt drives as a criterion for the uniformity of V-belts.
2 Definition
For the purposes of this International Standard, the following definition applies.
2.1
centre distance variation
ΔE
Difference between maximum and minimum centre distance measured on a standardized measuring fixture.
Annex A
Bibliography
| [1] | ISO 1604:1989, Belt drives — Endless wide V-belts for industrial speed-changers and groove profiles for corresponding pulleys. |
| [2] | ISO 2790:1989, Belt drives — Narrow V-belts for the automotive industry and corresponding pulleys — Dimensions. |
| [3] | ISO 3410:1989, Agricultural machinery — Endless variable-speed V-belts and groove sections of corresponding pulleys. |
| [4] | ISO 4184:1992, Belt drives — Classical and narrow V-belts — Lengths in datum system. |
| [5] | ISO 8419:1994, Belt drives — Narrow joined V-belts — Lengths in effective system. |