この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO 加盟団体) の世界的な連合です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のために加盟機関に回覧されます。
国際規格 ISO 962 は、技術委員会 ISO/TC 97, コンピュータおよび情報処理によって起草され、1973 年 9 月に加盟団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | アイルランド | スペイン |
| ベルギー | イタリア | スウェーデン |
| ブラジル | 日本 | スイス |
| ブルガリア | メキシコ | タイ |
| カナダ | オランダ | 七面鳥 |
| チェコスロバキア | ニュージーランド | イギリス |
| デンマーク | ポーランド | アメリカ |
| フランス | ポルトガル | ソビエト連邦 |
| ドイツ | ルーマニア | ユーゴスラビア |
| ハンガリー | 南アフリカ共和国 |
この文書の不承認を表明した加盟団体はありませんでした。
この国際規格は、ISO 勧告 R 962-1969 を取り消し、置き換えます。ISO 勧告 R 962-1969 は、その技術的改訂を構成します。
1 適用範囲と適用分野
この国際規格は、9 トラック 12.7 mm (0.5 インチ) 磁気テープでの 7 ビット符号化文字セットとその 7 ビットおよび 8 ビット拡張の実装を指定します。
2 参考文献
2.1この国際標準は、ISO 646, 情報処理交換のための 7 ビット コード化文字セット、および ISO 2022, ISO 7 ビット コード化文字セットで使用するためのコード拡張技術の主題である 7 ビット コード化文字セットを参照します。 .
2.2この文字セットが実装されている磁気テープは、次の ISO 出版物で指定されています。
- ISO/R 1862, 情報交換用の 9 トラック 8 rpm (200 rpi) 磁気テープ。
- ISO/R 1863, 情報交換用の 9 トラック 32 rpm (800 rpi) 磁気テープ。
- IS0 ...、情報交換用の 9 トラック 63 rpm (1 600 rpi) 位相エンコード磁気テープ。1)
2.3磁気ラベルは、ISO/R 1001, 情報交換のための磁気テープラベルおよびファイル構造の主題です。
3 定義
(3 ページの図は、次の定義を示しています。)
3.1
磁気テープ
コンピュータおよび関連機器での入力、出力、および保存を目的とした磁気信号を受け入れて保持するテープ。 2)
3.2
トラック
一連の磁気信号が記録されるテープ上の縦方向の領域。 2)
3.3
基準エッジ
観察者から最も遠いエッジ、またはページの上部に最も近いエッジ。テープが平らに置かれ、酸化物面が上になり、録音の移動方向が左から右になります。 2) (図参照)
3.4
行
トラックの磁気信号が記録されるテープの横断領域。
3.5
ブロック
適切なマークで区切られた一連の行で、グループとして記録および読み取りが行われます。
3.6
キャップ
ブロック間の未使用のスペース。
3.7
8ポジション環境
それぞれが 1 ビットを記録できる 8 つの位置のセット。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO Member Bodies). The work of developing International Standards is carried out through ISO Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 962 was drawn up by Technical Committee ISO/TC 97, Computers and information processing, and circulated to the Member Bodies in September 1973.
It has been approved by the Member Bodies of the following countries:
| Australia | Ireland | Spain |
| Belgium | Italy | Sweden |
| Brazil | Japan | Switzerland |
| Bulgaria | Mexico | Thailand |
| Canada | Netherlands | Turkey |
| Czechoslovakia | New Zealand | United Kingdom |
| Denmark | Poland | U.S.A. |
| France | Portugal | U.S.S.R. |
| Germany | Romania | Yugoslavia |
| Hungary | South Africa, Rep. of |
No Member Body expressed disapproval of the document.
This International Standard cancels and replaces ISO Recommendation R 962-1969, of which it constitutes a technical revision.
1 SCOPE AND FIELD OF APPLICATION
This International Standard specifies the implementation of the 7-bit coded character set and its 7-bit and 8-bit extensions on 9-track 12,7 mm (0.5 in) magnetic tape.
2 REFERENCES
2.1 This International Standard refers to the 7-bit coded character set which is the subject of ISO 646, 7-bit coded character set for information processing interchange, and ISO 2022, Code extension techniques for use with the ISO 7-bit coded character set.
2.2 The magnetic tape on which this character set is implemented is specified in the following ISO publications:
- ISO/R 1862, 9-track 8 rpmm (200 rpi) magnetic tape for information interchange;
- ISO/R 1863, 9-track 32 rpmm (800 rpi) magnetic tape for information interchange;
- IS0 ..., 9-track 63 rpmm (1 600 rpi) phase-encoded magnetic tape for information interchange.1)
2.3 The magnetic labelling is the subject of ISO/R 1001, Magnetic tape labelling and file structure for information interchange.
3 DEFINITIONS
(The figure on page 3 illustrates the following definitions.)
3.1
magnetic tape
A tape which will accept and retain magnetic signals intended for input, output and storage purposes on computers and associated equipment. 2)
3.2
track
A longitudinal area on the tape along which a series of magnetic signals may be recorded. 2)
3.3
reference edge
The edge farthest from an observer, or nearest the top of a page, when a tape is lying flat with the oxide side uppermost and the direction of movement for recording from left to right. 2) (See figure.)
3.4
row
A transverse area on the tape along which magnetic signals of tracks are recorded.
3.5
block
A series of rows, limited by suitable marks, to be recorded and read as a group.
3.6
gap
A space left unused between blocks.
3.7
8 position environment
A set of eight positions, each available to record one bit.