※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 965-2 は、技術委員会 ISO/TC 1, ねじ山、サブ委員会 SC 2, 公差によって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO 965-2:1980) を廃止し、置き換えます。
ISO 965 は、 「ISO 汎用メートルねじ - 公差」という一般タイトルのもと、次の部分で構成されています。
- Part 1 部: 原則と基礎データ
- Part 2: 汎用ボルトおよびナットのねじ山のサイズ制限 — 中品質
- Part 3: 構造上のねじ山の偏差
- Part 4: 亜鉛めっき後に公差位置 H または G でタップされためねじと嵌合する溶融亜鉛めっきおねじのサイズの制限
- Part 5: 亜鉛めっき前の公差位置 h の最大サイズで溶融亜鉛めっきおねじと嵌合するめねじのサイズの制限
1 スコープ
ISO 965 のこの部分では、ISO 68-1 に準拠した基本プロファイルを持つ ISO 262 に準拠する ISO 汎用メートルねじ (M) のピッチおよび頂部直径のサイズ制限を指定します。
指定された公差品質のサイズの制限は、ISO 965-1 で指定された基本的な偏差と公差から導出されます。
2 規範的参照
以下の規格には、本書での参照を通じて ISO 965 のこの部分の規定を構成する規定が含まれています。発行時点では、示されている版は有効でした。すべての規格は改訂される可能性があり、ISO 965 のこの部分に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 68-1:1998, ISO 汎用ねじ山 基本プロファイル — Part 1: メートルねじ山。
- ISO 262:1998, ISO 汎用メートルねじ - ねじ、ボルト、ナットの選択されたサイズ。
- ISO 965-1:1998, ISO 汎用メートルねじ - 公差 - Part 1: 原則と基本データ。
- ISO 5408:1983, 円筒ねじ - 語彙。
3 つの定義
ISO 965 のこの部分の目的には、ISO 5408 で与えられた定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 965-2 was prepared by Technical Committee ISO/TC 1, Screw threads, Subcommittee SC 2, Tolerances.
This third edition cancels and replaces the second edition (ISO 965-2:1980), which has been technically revised.
ISO 965 consists of the following parts, under the general title ISO general purpose metric screw threads — Tolerances
- Part 1: Principles and basic data
- Part 2: Limits of sizes for general purpose bolt and nut threads — Medium quality
- Part 3: Deviations for constructional screw threads
- Part 4: Limits of sizes for hot-dip galvanized external threads to mate with internal threads tapped with tolerance position H or G after galvanizing
- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
1 Scope
This part of ISO 965 specifies limits of sizes for pitch and crest diameters for ISO general purpose metric screw threads (M) conforming to ISO 262 having basic profile according to ISO 68-1.
The limits of sizes for the tolerance quality specified are derived from the fundamental deviations and tolerances specified in ISO 965-1.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 965. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO 965 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 68-1:1998, ISO general purpose screw threads Basic profile — Part 1: Metric screw threads.
- ISO 262:1998, ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts.
- ISO 965-1:1998, ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data.
- ISO 5408:1983, Cylindrical screw threads — Vocabulary.
3 Definitions
For the purpose of this part of ISO 965 the definitions given in ISO 5408 apply.