※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 9666 は、技術委員会 ISO/TC 20, 航空機および宇宙船、小委員会 SC 9, 航空貨物および地上機器によって作成されました。
この国際規格の附属書 A は情報提供のみを目的としています。
1 スコープ
この国際規格は、民間航空輸送で一般的に使用されているすべての種類の航空機に適した自走式化粧室サービス車両の機能要件を指定しています。
これは機器の設計を指定するものではありませんが、航空環境における効率的な運航に不可欠であることが知られている特定の基準を強調しています。
いかなる場合においても、この国際規格は、車両の使用が提案されている地域に適用される衛生に関する国内規制を十分に参照して適用されるものとします。
2 規範的参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 1950:1974, 航空機 — サービス、メンテナンス、地上での取り扱い、および安全/危険ポイントの特定。
- ISO 6966:1982, 航空機 — 航空機積載装置の基本要件。
- 世界保健機関、飲料水の水質に関するガイドライン。第 1 巻。ジュネーブ。 1984 年。ISBN 92 4 154 168
- 世界保健機関、飲料水の水質に関するガイドライン。第 2 巻。基準およびその他のサポート情報。ジュネーブ。 1986年。ISBN 92 4 154 169
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 9666 was prepared by Technical Committee ISO/TC 20, Aircraft and space vehicles, Sub-Committee SC 9, Air cargo and ground equipment.
Annex A of this International Standard is for information only.
1 Scope
This International Standard specifies functional requirements for a self-propelled lavatory-servicing vehicle suitable for all aircraft types commonly in service in civil air transport.
It does not specify equipment design but highlights certain criteria that are known to be essential for efficient operation in the airline environment.
In all cases, this International Standard shall be applied with due reference to national regulations on sanitation that are applicable in the area in which it is proposed that the vehicle is to be used.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 1950:1974, Aircraft — Identification of servicing, maintenance, ground handling and safety/hazard points.
- ISO 6966:1982, Aircraft — Basic requirements for aircraft loading equipment.
- World Health Organization, Guidelines for Drinking-Water Quality. Volume 1. Recommendations. Geneva. 1984. ISBN 92 4 154 1687.
- World Health Organization, Guidelines for Drinking-Water Quality. Volume 2. Criteria and Other Supporting Information. Geneva. 1986. ISBN 92 4 154 1695.