※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 9679 は、技術委員会 ISO/TC 20, 航空機および宇宙車両、小委員会 SC 10, 航空宇宙流体システムおよびコンポーネントによって作成されました。
1 スコープ
この国際規格は、航空宇宙流体システムの設置に使用される支持または保持装置の認定および比較に使用される試験方法および手順を指定します。
部品規格、調達仕様書、その他の定義文書を参照する場合に適用されます。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 1431-1:2004, ゴム、加硫または熱可塑性 — オゾン分解に対する耐性 — 1: 静的および動的ひずみ試験
- ISO 2951, 加硫ゴム — 絶縁抵抗の測定
- ISO 4892-3, プラスチック — 実験室の光源への暴露方法 — 3: 蛍光紫外線ランプ
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9679 was prepared by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 10, Aerospace fluid systems and components.
1 Scope
This International Standard specifies the test methods and procedures to be used for the qualification and comparison of support or retention devices used in the installation of aerospace fluid systems.
It is applicable when reference is made to parts standards, procurement specifications, or other definition documents.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1431-1:2004, Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — 1: Static and dynamic strain testing
- ISO 2951, Vulcanized rubber — Determination of insulation resistance
- ISO 4892-3, Plastics — Methods of exposure to laboratory light sources — 3: Fluorescent UV lamps