※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 9685 は、技術委員会 ISO/TC 102, 鉄鉱石、小委員会 SC 2, 化学分析によって作成されました。
付属書 A は、この国際規格の不可欠な部分を形成します。付録 B および C は情報提供のみを目的としています。
1 スコープ
この国際規格は、鉄鉱石のニッケルおよび/またはクロム含有量を測定するためのフレーム原子吸光分析法を規定しています。
この方法は、焼結生成物を含む天然鉄鉱石、鉄鉱石精鉱および凝集体中の 0.003% ( m∣m ) から 0.1% ( m∣m ) までのニッケルおよび/またはクロム含有量1)に適用できます。
2 規範的参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 648:1977, 実験用ガラス器具 — ワンマークピペット。
- ISO 1042:1983, 実験用ガラス器具 — ワンマークメスフラスコ。
- ISO 3081:1986, 鉄鉱石 — 増分サンプリング — 手動法。
- ISO 3082:1987, 鉄鉱石 - 増分サンプリングとサンプル前処理 - 機械的方法。
- ISO 3083:1986, 鉄鉱石 - サンプルの調製 - 手動法。
- ISO 7764:1985, 鉄鉱石 - 化学分析用の予備乾燥試験サンプルの調製。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75% of the member bodies casting a vote.
International Standard ISO 9685 was prepared by Technical Committee ISO/TC 102, Iron ores, Sub-Committee SC 2, Chemical analysis.
Annex A forms an integral part of this International Standard. Annexes B and C are for information only.
1 Scope
This International Standard specifies a flame atomic absorption spectrometric method for the determination of nickel and/or chromium contents of iron ores.
This method is applicable to nickel and/or chromium contents between 0,003 % (m∣m) and 0,1 % (m∣m) 1) in natural iron ores, iron ore concentrates and agglomerates, including sinter products.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 648:1977, Laboratory glassware — One-mark pipettes.
- ISO 1042:1983, Laboratory glassware — One-mark volumetric flasks.
- ISO 3081:1986, Iron ores — Increment sampling — Manual method.
- ISO 3082:1987, Iron ores — Increment sampling and sample preparation — Mechanical method.
- ISO 3083:1986, Iron ores — Preparation of samples — Manual method.
- ISO 7764:1985, Iron ores — Preparation of predried test samples for chemical analysis.