※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 9826 は、技術委員会 ISO/TC 113, 開水路における液体流量の測定、小委員会 SC 2, ノッチ、堰および水路によって作成されました。
1 スコープ
この国際規格は、Parshall および SANIIRI 水路を使用した、定常またはゆっくりと変化する流れ条件下での開水路 (特に用水路) における液体流量測定の方法を規定しています。
これらの水路は、自由流条件と水没条件の両方で動作するように設計されています。
2 基準参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 772:1988, 開水路における液体流量測定 - 語彙と記号。
3 定義と記号
この国際規格の目的のために、ISO 772 で与えられる定義と記号、および以下の定義が適用されます。
3.1
パーシャル水路
水平な床を持つ収束入口部、3:8 の勾配で下向きに傾斜した床を持つ短いスロート部、および 1:6 の勾配で上向きに傾斜した床を持つ分岐出口部を有する測定水路。
3.2
三入水路
下流端に垂直な落差を備えた平らな床と、下流の水路に接続する垂直な壁を備えた収束入口セクションを備えた水路を測定します。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 9826 was prepared by Technical Committee ISO/TC 113, Measurement of liquid flow in open channels, Sub-Committee SC 2, Notches, weirs and flumes.
1 Scope
This International Standard specifies methods of liquid flow measurement in open channels (particularly in irrigation canals) under steady or slowly varying flow conditions, using Parshall and SANIIRI flumes.
These flumes are designed to operate under both free-flow and submergence conditions.
2 Normative reference
The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 772:1988, Liquid flow measurement in open channels — Vocabulary and symbols.
3 Definitions and symbols
For the purposes of this International Standard, the definitions and symbols given in ISO 772 and the following definitions apply.
3.1
Parshall flume
Measuring flume having a converging entrance section with a level floor, a short throat section with a floor inclined downwards at a gradient of 3:8, and a diverging exit section with a floor inclined upwards at a gradient of 1:6.
3.2
SANIIRI flume
Measuring flume with a converging entrance section having a level floor with a vertical drop at its downstream end and perpendicular walls to join It to the downstream channel.