※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
はじめに ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 9862 は、ISO と CEN 間の技術協力に関する協定 (ウィーン協定) に従って、技術委員会 ISO/TC 221, Geosyntheticsと協力して、欧州標準化委員会 (CEN) によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 9862:1990) を取り消して置き換えるものです。
序文
このドキュメント (EN ISO 9862:2005) は、技術委員会 ISO/TC 221 "Geosynthetics" と協力して、IBN が事務局を務める技術委員会 CEN/TC 189 "Geosynthetics" によって作成されました。
この欧州規格は、遅くとも 2005 年 8 月までに、同一のテキストの発行または承認によって、国内規格の地位を与えられるものとし、矛盾する国内規格は、遅くとも 2005 年 8 月までに撤回されるものとします。
この文書は、EN 963:1995 に取って代わります。
CEN/CENELEC 内部規則によると、次の国の国家標準化組織がこの欧州標準を実装する義務があります: オーストリア、ベルギー、キプロス、チェコ共和国、デンマーク、エストニア、フィンランド、フランス、ドイツ、ギリシャ、ハンガリー、アイスランド、アイルランド、イタリア、ラトビア、リトアニア、ルクセンブルク、マルタ、オランダ、ノルウェー、ポーランド、ポルトガル、スロバキア、スロベニア、スペイン、スウェーデン、スイス、英国。
序章
ジオシンセティックスはさまざまな方法で生産されており、一部は従来の織物手順を使用しており、一部は織物手順として一般に認識されていない手順を使用しています。ジオシンセティックスは prEN ISO 10318 で定義されています。
ジオシンセティックスは通常、ロールで供給されます。
サンプリングは、平均所見とその変動係数の可能な限り最良の統計的有意性を確保する必要がありますが、ロット全体と建設現場に供給されるその単一ユニットにわたるサンプルと標本の可能な分布には実際的な制限があります。
1 スコープ
この文書は、建設現場に配送されるジオシンセティックスのサンプリング、およびサンプルからの試験片の準備に関する一般原則を確立しています。
サンプリングの原則は、ロールで供給されるジオシンセティックスに適用されます。
注EN ISO 186 は、シート形式で供給される製品に使用できます。
標本調製の原則は、すべてのジオシンセティックスに適用できます。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- EN ISO 10320, ジオテキスタイルおよびジオテキスタイル関連製品 — サイトでの識別 (ISO 10320:1999)
参考文献
| EN ISO 186, 紙および板紙 — 平均品質を決定するためのサンプリング (ISO 186:2002) | |
| prEN ISO 10318, Geosynthetics — 用語と定義 (ISO/DIS 10318:2000) |
Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9862 was prepared by the European Committee for Standardization (CEN) in collaboration with Technical Committee ISO/TC 221, Geosynthetics, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 9862:1990), which has been technically revised.
Foreword
This document (EN ISO 9862:2005) has been prepared by Technical Committee CEN/TC 189"Geosynthetics", the secretariat of which is held by IBN, in collaboration with Technical Committee ISO/TC 221" Geosynthetics".
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2005, and conflicting national standards shall be withdrawn at the latest by August 2005.
This document supersedes EN 963:1995.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Introduction
Geosynthetics are produced in many different ways, partly using traditional textile procedures, partly using procedures not commonly recognized as textile procedures. Geosynthetics are defined in prEN ISO 10318.
Geosynthetics are typically supplied in rolls.
Whilst sampling should ensure the best possible statistical significance of the average finding and its coefficient of variation, there are practical limits to the possible distribution of samples and specimens over the entire lot and its single units supplied to a construction site.
1 Scope
This document establishes general principles for the sampling of geosynthetics delivered to construction sites, and for the preparation of test specimens from the samples.
The sampling principles are applicable to geosynthetics supplied in rolls.
NOTE EN ISO 186 may be used for products supplied in sheet form.
The specimen-preparation principles are applicable to all geosynthetics.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- EN ISO 10320, Geotextiles and geotextile-related products — Identification on site (ISO 10320:1999).
Bibliography
| EN ISO 186, Paper and board — Sampling to determine average quality (ISO 186:2002). | |
| prEN ISO 10318, Geosynthetics — Terms and definitions (ISO/DIS 10318:2000) |