この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 9896 は、技術委員会 ISO/TC 138, 流体輸送用のプラスチック パイプ、継手およびバルブ、小委員会 SC 1, 土壌、廃棄物および排水用のプラスチック パイプおよび継手 (土地の排水を含む)によって作成されました。
附属書 A から K は、この規格の不可欠な部分を形成します。
序章
この国際規格の対象となるプラスチック製トラップは、TC 138/SC 1 によって準備されている配管排出システムの製品仕様で指定されている配管排出システムの他の継手とは十分に異なり、別の国際規格が必要です。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 9896 was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, Subcommittee SC 1, Plastics pipes and fittings for soil, waste and drainage (including land drainage).
Annexes A to K form an integral part of this International Standard.
Introduction
The plastics traps covered by this International Standard are sufficiently different from the other fittings of a pipework discharge system specified in the product specifications for pipework discharge systems being prepared by TC 138/SC 1 to require a separate International Standard.