※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 9903-2 は、ISO/TC 72 技術委員会「繊維機械およびドライクリーニングおよび工業用洗濯用機械」 、小委員会 SC 1 「紡績準備、紡績、撚糸および巻取り機械および付属品」によって作成されました。
この第 1 版は、ISO 9903-1 の第 1 版とともに、技術的に改訂された ISO 9903:1991 を廃止し、置き換えるものです。
ISO 9903 は、一般タイトル「繊維機械および付属品 - 金属カード衣類用セクション ワイヤーの主要寸法」の下に、次の部分で構成されています。
- Part 1: インターロックまたはインターチェーンを使用しない足
- Part 2: インターチェーンのある足
1 スコープ
ISO 9903 のこの部分では、インターチェーン フットを備えた金属カード クロージングのセクション ワイヤーの主な寸法を指定しています。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 5234, 繊維機械および付属品 — メタリックカード衣類 — 用語と定義
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9903-2 was prepared by Technical Committee ISO/TC 72, Textile machinery and machinery for dry-cleaning and industrial laundering, Subcommittee SC 1, Spinning preparatory, spinning, twisting and winding machinery and accessories.
This first edition, together with the first edition of ISO 9903-1, cancels and replaces ISO 9903:1991, which has been technically revised.
ISO 9903 consists of the following parts, under the general title Textile machinery and accessories — Main dimensions for section wires for metallic card clothing:
- Part 1: Foot without interlocking or interchaining
- Part 2: Foot with interchaining
1 Scope
This part of ISO 9903 specifies the main dimensions for section wires for metallic card clothing with interchaining foot.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 5234, Textile machinery and accessories — Metallic card clothing — Terms and definitions