※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 9959-1 は、技術委員会 ISO/TC 10, 技術図面、製品定義および関連文書、小委員会 SC 9, 図面および関連文書の媒体および機器によって作成されました。
ISO 9959 は、次の部分で構成されており、一般的なタイトルは「数値制御製図機 - 性能評価のための製図試験」です。
- Part 1: ベクトル プロッタ
ラスタ プロッタの性能を評価するための描画テストは、ISO 9959-2 の対象となります。
1 スコープ
ISO 9959 のこのパートでは、機械の種類に関係なく、動的精度や必要な描画時間などのグラフィック品質機能を評価するために、ISO 9179-1 で定義されているベクトル プロッター (電気機械式プロッター1)の描画テストを指定しています。
異なる気候条件下でのドローイングメディアの寸法変化がテスト結果に影響を与える可能性があるため、ドローイングが行われる場所で通常決定される静的なドローイング精度の評価は許可されません。
2 参考文献
以下の規格には規定が含まれており、このテキストで参照することにより、ISO 9959 のこの部分の規定を構成します。発行の時点で、示された版は有効でした。すべての規格は改訂される可能性があり、ISO 9959 のこの部分に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 554:1976, コンディショニングおよび/またはテスト用の標準大気 - 仕様。
- ISO 5457:1980, 技術図面 — 図面シートのサイズとレイアウト。
- ISO 9179-1:1988, 製図 — 数値制御製図機 — 1: 語彙。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 9959-1 was prepared by Technical Committee ISO/TC 10, Technical drawings, product definition and related documentation, Sub-Committee SC 9, Media and equipment for drawing and related documentation.
ISO 9959 consists of the following parts, under the general title Numerically controlled draughting machines — Drawing test for the evaluation of performance:
- Part 1: Vector plotters
The drawing test for the evaluation of the performance of raster plotters will form the subject of ISO 9959-2.
1 Scope
This part of ISO 9959 specifies a drawing test for vector plotters (electromechanical plotters 1) as defined in ISO 9179-1) for evaluating the graphical quality capabilities, for example the dynamic accuracy and the required drawing time, independently of the machine type.
It does not permit the evaluation of the static drawing accuracy which is normally determined at the place where a drawing is made because dimensional changes of the drawing media under different climatic conditions can influence the test results.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 9959. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO 9959 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 554:1976, Standard atmospheres for conditioning and/or testing — Specifications.
- ISO 5457:1980, Technical drawings — Sizes and layout of drawing sheets.
- ISO 9179-1:1988, Technical drawings — Numerically controlled draughting machines — 1: Vocabulary.