※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 9964-2 は、技術委員会 ISO/TC 147, 水質、小委員会 SC 2, 物理的、化学的、生化学的方法によって作成されました。
ISO 9964 は、次の部分で構成され、一般的なタイトルは「水質 - ナトリウムとカリウムの測定」です。
- Part 1: 原子吸光分析によるナトリウムの測定
- Part 2: 原子吸光分析によるカリウムの測定
- Part 3: フレーム発光分析Partナトリウムとカリウムの測定
1 スコープ
1.1 適用分野
この国際規格は、フレーム原子吸光分析 (AAS) による溶存カリウムの測定方法を規定しています。原水および飲料水の分析を目的としています。
この方法は、カリウムの質量濃度が 5 mg/l から 50 mg/l の範囲の水サンプルに適用できます。この範囲は、条項 8 で指定された係数とは異なる希釈係数が選択された場合、下限または上限に拡張できます。
1.2 干渉
原水および飲料水に通常存在するイオンは、原子吸光分析によるカリウムの測定を妨げません。
2 参考文献
以下の規格には規定が含まれており、このテキストで参照することにより、ISO 9964 のこの部分の規定を構成します。発行の時点で、示された版は有効でした。すべての規格は改訂される可能性があり、ISO 9964 のこの部分に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 5667-1:1980, 水質 — サンプリング — 1: サンプリングプログラムの設計に関するガイダンス。
- ISO 5667-2:1991, 水質 — サンプリング — 2: サンプリング技術に関するガイダンス。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 9964-2 was prepared by Technical Committee ISO/TC 147, Water quality, Sub-Committee SC 2, Physical, chemical, biochemical methods.
ISO 9964 consists of the following parts, under the general title Water quality — Determination of sodium and potassium:
- Part 1: Determination of sodium by atomic absorption spectrometry
- Part 2: Determination of potassium by atomic absorption spectrometry
- Part 3: Determination of sodium and potassium by flame emissionspectrometry
1 Scope
1.1 Field of application
This International Standard specifies a method for the determination of dissolved potassium by flame atomic absorption spectrometry (AAS). It is intended for the analysis of raw and drinking waters.
The method is applicable to water samples with a mass concentration of potassium in the range from 5 mg/l to 50 mg/l. This range can be extended to lower or higher limits if dilution factors are chosen which are different from the factor specified in clause 8.
1.2 Interferences
The ions normally present in raw and drinking waters do not interfere with the determination of potassium by atomic absorption spectrometry.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 9964. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO 9964 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 5667-1:1980, Water quality — Sampling — 1: Guidance on the design of sampling programmes.
- ISO 5667-2:1991, Water quality — Sampling — 2: Guidance on sampling techniques.