この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである国家機関は、技術活動の特定の分野を扱うために、それぞれの組織によって設立された技術委員会を通じて、国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力する ISO と IEC と連携して、政府および非政府の他の国際機関も作業に参加しています。
情報技術の分野では、ISO と IEC が合同技術委員会 ISO/IEC JTC1 を設立しました。合同技術委員会によって採択された国際規格草案は、投票のために各国の機関に回覧されます。国際規格として発行するには、投票を行う国の機関の少なくとも 75% による承認が必要です。
国際標準 ISO/IEC 10090は、欧州コンピュータ製造業者協会によって (標準 ECMA-154 として) 作成され、合同技術委員会 ISO/IEC JTC1 によって、特別な「迅速な手順」の下で採用されました。 ISO および IEC の国家機関による承認。
附属書 A, B, D, E, F, H, K, M, N, および R は、この規格の不可欠な部分を形成します。附属書 C, G, J, L, P, および Q は情報提供のみを目的としています。
序章
この国際規格は、熱磁気効果と光磁気効果を使用してデータを何度も書き込み、読み取り、消去できるタイプの 90 mm 光ディスク カートリッジ (ODC) の特性を指定します。
光ディスクの一部または全部は、スタンピングまたは他の手段によって事前に記録および再生され得る。この情報は、磁気光学効果に頼らずに読み取られます。
この国際規格は、ボリュームおよびファイル構造の規格とともに、データ処理システム間の完全なデータ交換を提供します。交換には、エラーを発生させずにデータの書き込み、読み取り、および消去を行う機能が含まれます。
セクション 1 一般
1 スコープ
この国際規格は、
- コンフォーマンステストとリファレンスドライブの条件。
- データ処理システム間の機械的互換性を提供するための、カートリッジの機械的および物理的特性。
- エンボス加工とユーザー書き込みの両方の、ディスク上の情報のフォーマット。
- ディスク上のエンボス情報の特性。
- ディスクの磁気光学特性により、処理システムがデータをディスクに書き込むことができます。
- ディスク上のユーザー書き込みデータの品質を最小限に抑え、データ処理システムがディスクからデータを読み取ることができるようにします。
3 規範的参照
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行時点では、示されたエディションが有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下にリストされている規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- IEC 950:1991, 電気ビジネス機器を含む情報技術機器の安全性。
4 つの定義
この国際規格の目的のために、次の定義が適用されます。
4.1
場合
ディスクを保護し、ディスクの交換を容易にする、光ディスク用のハウジング。
4.2
巡回冗長検査
CRC
データのエラーを検出する方法。
4.3
エンボスマーク
光磁気手段によって変更できないように形成されたマーク。
4.4
入口面
光ビームが最初に衝突するディスクの表面。
4.5
エラー訂正コード
ECC
データ内の特定の種類のエラーを修正するように設計されたエラー検出コード。
4.6
田畑
セクターの下位区分。
4.7
フォーマット
ディスク上の情報の配置またはレイアウト。
4.8
溝
4.9
間を空ける
データがバースト エラーの影響を受けにくくなるように、データ単位の物理シーケンスを割り当てるプロセス
4.10
カー回転
磁気光学効果によって引き起こされる、記録層からの反射時の光ビームの偏光面の回転。
4.11
土地と溝
情報を記録する前に適用され、トラックの位置を定義するために使用される、ディスクの溝のような特徴。グルーブは、対になってトラックを形成するランドよりも入口面に近い位置にあります。
4.12
マーク
記録層の特徴で、磁気ドメイン、ピット、または光学システムによって感知できるその他のタイプまたはフォームの形をとることがあります。マークのパターンは、ディスク上のデータを表します。
注記1: 「マーク」と名付けられたセクターの細分は、この定義の意味でのマークではありません。
4.13
光ディスク
記録層にマークの形で情報を受け入れて保持し、光ビームで読み取ることができるディスク。
4.14
光ディスクカートリッジ
ODC
光ディスクが入ったケースからなる装置。
4.15
分極化
光ビームの偏光方向は、ビームの電気ベクトルの方向です。
注記1:偏光面は、電気ベクトルとビームの伝搬方向を含む面です。ビームの伝搬方向を見ている観測者にとって、電気ベクトルの終点が時計回りの楕円を描いているように見える場合、偏光は右回りです。
4.16
記録層
製造および/または使用中にデータが書き込まれるディスクの層。
4.17
リード・ソロモン符号
バーストで発生する、または強く相関するエラーの訂正に特に適したエラー検出および/または訂正コード。
4.18
書き換え可能な光ディスク
光ビームにより、指定された領域のデータの書き込み、消去、および再書き込みが可能な光ディスク。
4.19
セクタ
ゾーンの他のアドレス可能な部分とは独立してアクセスできる、ディスクの情報ゾーン内のトラックのアドレス可能な最小部分。
4.20
一
記録層を機械的に支持するために設けられた、ディスクの透明な層であり、光ビームがそれを通して記録層にアクセスする。
4.21
トラック
ディスクの 1 回転中に光ビームの焦点がたどる経路。
4.22
ゾーン
ディスクの環状領域。
セクション 2 機械的および物理的特性
第3節 情報の形式
第4節 エンボス情報の特徴
第5節 記録層の特徴
セクション 6 利用者データの特徴
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75% of the national bodies casting a vote.
International Standard ISO/IEC 10090 was prepared by the European Computer Manufacturers Association (as Standard ECMA-154) and was adopted, under a special"fast-track procedure”, by Joint Technical Committee ISO/IEC JTC1, Information technology in parallel with its approval by national bodies of ISO and IEC.
Annexes A, B, D, E, F, H, K, M, N and R form an integral part of this International Standard. Annexes C, G, J, L, P and Q are for information only.
Introduction
This International Standard specifies the characteristics of 90 mm optical disk cartridges (ODCs) of the type providing for data to be written, read and erased many times using the thermo-magnetic and magneto-optical effects.
A part or all of the optical disk may be pre-recorded and be reproduced by stamping or other means. This information is read without recourse to the magneto-optical effect.
This International Standard together with a standard for volume and file structure provides for full data interchange between data processing systems. Interchange involves the ability to write, read and erase data without introducing any error.
Section 1 General
1 Scope
This International Standard specifies
- the conditions for conformance testing and the Reference Drive;
- the mechanical and physical characteristics of the cartridge, so as to provide mechanical interchangeability between data processing systems;
- the format of the information on the disk, both embossed and user-written;
- the characteristics of the embossed information on the disk;
- the magneto-optical characteristics of the disk, enabling processing systems to write data onto the disk;
- the minimum quality of user-written data on the disk, enabling data processing systems to read data from the disk.
3 Normative reference
The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard listed below. Members of IEC and ISO maintain registers of currently valid International Standards.
- IEC 950:1991, Safety of information technology equipment, including electrical business equipment.
4 Definitions
For the purpose of this International Standard the following definitions apply.
4.1
case
The housing for an optical disk, that protects the disk and facilitates disk interchange.
4.2
cyclic redundancy check
CRC
A method for detecting errors in data.
4.3
embossed mark
A mark so formed as to be unalterable by magneto-optical means.
4.4
entrance surface
The surface of the disk on to which the optical beam first impinges.
4.5
error correction code
ECC
An error-detecting code designed to correct certain kinds of errors in data.
4.6
field
A subdivision of a sector.
4.7
format
The arrangement or layout of information on the disk.
4.8
groove
4.9
interleaving
The process of allocating the physical sequence of units of data so as to render the data more immune to burst errors
4.10
Kerr rotation
The rotation of the plane of polarization of an optical beam upon reflection from the recording layer, as caused by the magneto-optical effect.
4.11
land and groove
A trench-like feature of the disk, applied before the recording of any information, and used to define the track location. The groove is located nearer to the entrance surface than the land with which it is paired to form a track.
4.12
mark
A feature of the recording layer which may take the form of a magnetic domain, a pit, or any other type or form that can be sensed by the optical system. The pattern of marks represents the data on the disk.
Note 1 to entry: Subdivisions of a sector which are named 'mark' are not marks in the sense of this definition.
4.13
optical disk
A disk that will accept and retain information in the form of marks in a recording layer, that can be read with an optical beam.
4.14
optical disk cartridge
ODC
A device consisting of a case containing an optical disk.
4.15
polarization
The direction of polarization of an optical beam is the direction of the electric vector of the beam.
Note 1 to entry: The plane of polarization is the plane containing the electric vector and the direction of propagation of the beam. The polarization is right-handed when to an observer looking in the direction of propagation of the beam, the end-point of the electric vector would appear to describe an ellipse in the clockwise sense.
4.16
recording layer
A layer of the disk on, or in, which data is written during manufacture and/or use.
4.17
Reed-Solomon code
An error detection and/or correction code which is particularly suited to the correction of errors which occur in bursts or are strongly correlated.
4.18
rewritable optical disk
An optical disk in which data in specified areas can be written, erased and rewritten by an optical beam.
4.19
sector
The smallest addressable part of a track in the Information Zone of a disk that can be accessed independently of other addressable parts of the zone.
4.20
substrate
A transparent layer of the disk, provided for mechanical support of the recording layer, through which the optical beam accesses the recording layer.
4.21
track
The path which is to be followed by the focus of the optical beam during one revolution of the disk.
4.22
zone
An annular area of the disk.