ISO/IEC 10165-5:1994 情報技術—オープンシステム相互接続—管理情報の構造：一般的な管理情報 | ページ 2

3.1 基本的な参照モデルの定義

このおすすめ |国際標準では、CCITT Rec. X.200 | で定義されている次の用語を使用しています。 ISO7498:

• a) (N)-SAP;
• b)オープンシステム。
• c)システム管理
• d)申請プロセス。

Foreword

ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.

In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.

International Standard ISO/IEC 10165-5 was prepared by Joint Technical Committee ISO/IЕС JTC 1, Information technology, in collaboration with ITU-T. The identical text is published as ITU-T Recommendation X.723.

ISO/IEC 10165 consists of the following parts, under the general title Information technology — Open Systems Interconnection — Structure of management information:

• Part 1: Management information model
• Part 2: Definition of management information
• Part 4: Guidelines for the definition of managed objects
• Part 5: Generic management information
• Part 6: Requirements and guidelines for implementation conformance statement proformas associated with management information

Introduction

ISO/IEC 10165 is a multipart standard developed according to ISO 7498 and ISO/IEC 7498-4. ISO/IEC 10165 is related to the following International Standards:

• ISO/IEC 9595:1990, Information technology — Open Systems Interconnection — Common management information service definition;
• ISO/IEC 9596:1990, Information technology — Open Systems Interconnection — Common management information protocol;
• ISO/IEC 10040:1992, Information technology — Open Systems Interconnection — Systems management overview;
• ISO/IEC 10164:1992, Information technology — Open Systems Interconnection — Systems Management.

1 Scope

This Recommendation | International Standard provides developers of OSI Recommendations | International Standards that contain managed object definitions with generic definitions of managed object classes that will

• provide common superclass definitions from which layer- or resource- specific object class definitions may be derived;
• assist with the development of common elements of object class definitions across multiple layers or components of layers;
• reduce duplication of effort in other working groups by identifying commonly useful definitions.

To this end, this Recommendation | International Standard defines managed object classes which may be used as superclasses, using the template notation defined in CCITT Rec. X.722 | ISO/IEC 10165-4, including the definition of any packages, attributes, attribute groups, behaviour, actions, notifications and parameters that may be associated with the superclasses. It also defines functional units required by layer- or resource-specific management standards which are not defined in the CCITT Rec. X.73X | ISO/IEC 10164 series of systems management function standards.

This Recommendation | International Standard is applicable to the development of any OSI Recommendation | International Standard which defines managed object classes that may be refined from the managed object classes defined in this Recommendation | International Standard.

This Recommendation | International Standard does not specify or imply any constraints on the development of managed object definitions in terms of their inheritance relationships. Developers of managed object class definitions are encouraged to use the definitions contained in this Recommendation | International Standard to promote consistency between similar managed object classes; however, use of these definitions is not mandated.

2 Normative references

The following Recommendations and International Standards contain provisions which, through reference in this text, constitute provisions of this Recommendation | International Standard. At the time of publication, the editions indicated were valid. All Recommendations and International Standards are subject to revision, and parties to agreements based on this Recommendation | International Standard are encouraged to investigate the possibility of applying the most recent edition of the Recommendations and International Standards listed below. Members of IEC and ISO maintain registers of currently valid International Standards. The ITU-T maintains a list of the currently valid Recommendations.

2.1 Identical Recommendations | International Standards

2.2 Paired Recommendations | International Standards equivalent in technical content

3 Definitions

For the purposes of this Recommendation | International Standard, the following definitions apply.

3.2 Management framework definitions

This Recommendation | International Standard uses the following terms defined in CCITT Rec. X.700 | ISO/IEC 7498-4:

managed object.

3.3 Systems management overview definitions

This Recommendation | International Standard uses the following terms defined in CCITT Rec. X.701 | ISO/IEC 10040:

• a) generic definitions;
• b) managed object class;
• c) management information;
• d) notification.

3.4 Management information model definitions

This Recommendation | International Standard uses the following terms defined in CCITT Rec. X.720 | ISO/IEC 10165-1:

• a) allomorphism;
• b) attribute type;
• c) behaviour;
• d) containment;
• e) name binding;
• f) package;
• g) specialization;
• h) subordinate object;
• i) superclass;
• j) superior object.

3.5 CMIS definitions

This Recommendation | International Standard uses the following terms defined in CCITT Rec. X.710 | ISO/IEC 9595: attribute.

3.6 ASN.1 definitions

This Recommendation | International Standard uses the following terms defined in CCITT Rec. X.208 | ISO/IEC 8824:

• a) object identifier;
• b) sequence-of type;
• c) sequence type;
• d) set-of type;
• e) set type;
• f) type.

3.7 GDMO definitions

This Recommendation | International Standard uses the following terms defined in CCITT Rec. X.722 | ISO/IEC 10165-4:

• a) managed object class definition;
• b) template.

4 Abbreviations