※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである国家機関は、技術活動の特定の分野を扱うために、それぞれの組織によって設立された技術委員会を通じて、国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力しています。 ISO および IEC と連携して、政府および非政府の他の国際機関もこの作業に参加しています。
情報技術の分野では、ISO と IEC は合同技術委員会 ISO/IEC JTC 1 を設立しました。合同技術委員会によって採択された国際規格の草案は、投票のために各国の機関に回覧されます。国際規格として発行するには、投票を行う国の機関の少なくとも 75% による承認が必要です。
国際規格 ISO/IEC 10173 は、合同技術委員会、ISO/IEC JTC 1, 情報技術、小委員会 SC 6, 電気通信およびシステム間の情報交換によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO/IEC 10173:1991) を取り消して置き換えるものです。
この規格の附属書 A から D は情報提供のみを目的としています。
1 スコープ
この国際規格は、ITU-T 勧告 I.431 に準拠する統合サービス デジタル ネットワーク (ISDN) プライマリ レート アクセス サービスの物理インターフェイスで使用する 8 接点コネクタ (プラグとジャック) とその接点番号の割り当てを指定します。
この国際標準では、ITU-T 勧告 I.431 と同様に、「NT」という用語は、NT1 および NT2 のネットワーク終端レイヤ 1 の側面を示すために使用され、「TE」という用語は、ネットワークの端末レイヤ 1 の側面を示すために使用されます。 TE1, TA, および NT
ノート
- 1この国際規格は、プラグとジャックの相互嵌合性を確保するために必要なコネクタ寸法のみを規定しています。コネクタの完全な詳細仕様は、IEC 603-7 の対象です。付録 C を参照してください。
- 2 ITU-T は、この国際規格でカバーされていない代替接続システムを認識しています。 IEC 169-8 (附属書 C を参照) で指定されている同軸コネクタを使用し、附属書 B に示されています。
2 参考文献
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO/IEC 8877:1992, Information technology — Telecommunications and information exchange between systems — リファレンス ポイント S および T にある ISDN Basic Access Interface のインターフェイス コネクタおよび接点の割り当て。
- ITU-T 勧告 I.431:1993, プライマリ レート ユーザー ネットワーク インターフェイス - レイヤー 1 仕様。
3 つの定義
この国際規格の目的のために、次の定義が適用されます。
3.1
コンタクト
電気経路を提供するために対応する要素と結合するコンポーネント内の導電性要素。
3.2
プラグ
送料オスコネクタ
3.3
ジャック
固定または自由メス コネクタ
附属書C
参考文献
| [1] | IEC 169-8:1978, 無線周波数コネクタ — 8: 外部導体の内径 6.5 m, バヨネット ロック付き RF 同軸コネクタ — 特性インピーダンス 50 オーム (タイプ BNC) |
| [2] | IEC 603-7:1996, プリント基板で使用する 3 MHz 未満の周波数用コネクタ — 7: コネクタの詳細仕様、8 ピン、一般的な嵌合機能を備えた固定および自由コネクタを含む、評価済みの品質。 |
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
International Standard ISO/IEC 10173 was prepared by Joint Technical Committee, ISO/IEC JTC 1, Information technology, Subcommittee SC 6, Telecommunications and information exchange between systems.
This second edition cancels and replaces the first edition (ISO/IEC 10173:1991), which has been technically revised.
Annexes A to D of this International Standard are for information only.
1 Scope
This International Standard specifies the 8-contact connector (plug and jack) and the assignments of its contact numbers for use in the physical interfaces of Integrated Services Digital Network (ISDN) primary rate access services conforming to ITU-T Recommendation I.431.
In this International Standard, as in ITU-T Recommendation I.431, the term"NT" is used to indicate the network terminating layer 1 aspects of NT1s and NT2s, and the term"TE" is used to indicate terminal layer 1 aspects of TE1s, TAs and NT2s.
NOTES
- 1 This International Standard specifies only those connector dimensions required to ensure intermatability of plug and jack. Complete detailed specifications of the connector are the subject of IEC 603-7, see annex C.
- 2 ITU-T recognizes an alternative connection system which is not covered by this International Standard. It uses coaxial connectors as specified in IEC 169-8 (see annex C), and is illustrated in annex B.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO/IEC 8877:1992, Information technology — Telecommunications and information exchange between systems — Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T.
- ITU-T Recommendation I.431:1993, Primary rate user-network interface — Layer 1 specification.
3 Definitions
For the purposes of this International Standard, the following definitions apply.
3.1
contact
the conductive element in a component which mates with the corresponding element to provide an electrical path
3.2
plug
free male connector
3.3
jack
fixed or free female connector
Annex C
Bibliography
| [1] | IEC 169-8:1978, Radio-frequency connectors — 8: R.F. coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with bayonet lock — Characteristic impedance 50 ohms (Type BNC). |
| [2] | IEC 603-7:1996, Connectors for frequencies below 3 MHz for use with printed boards — 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality. |