※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである国家機関は、技術活動の特定の分野を扱うために、それぞれの組織によって設立された技術委員会を通じて、国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力しています。 ISO および IEC と連携して、政府および非政府の他の国際機関もこの作業に参加しています。
情報技術の分野では、ISO と IEC は合同技術委員会 ISO/IEC JTC 1 を設立しました。合同技術委員会によって採択された国際規格の草案は、投票のために各国の機関に回覧されます。国際規格として発行するには、投票を行う国の機関の少なくとも 75% による承認が必要です。
国際標準 ISO/IEC 11319 は、欧州コンピュータ製造業者協会によって (標準 ECMA-145 として) 作成され、合同技術委員会 ISO/IEC JTC 1, 情報技術、サブ委員会 11, ISO および IEC の国家機関による承認と並行して、デジタル データ交換のための柔軟な磁気メディア。
附属書 A, B, および C は、この規格の不可欠な部分を形成します。附属書 D および E は情報提供のみを目的としています。
セクション 1 一般
1 スコープ
この国際規格は、幅 8 mm の磁気テープ カートリッジの物理的および磁気的特性を指定して、そのようなカートリッジの互換性を可能にします。また、フォーマットと記録方法も提供するため、磁気テープ ラベルに関する ISO 1001 と共に、このような磁気テープ カートリッジによる完全なデータ交換が可能になります。
3 参考文献
次の規格には規定が含まれており、このテキストで参照することにより、この国際規格の規定を構成します。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO/R 527:1966, プラスチック - 引張特性の測定。
- ISO 1001:1986, 情報処理 — 情報交換のための磁気テープのファイル構造とラベル付け。
- ISO 1302:1978, 技術図面 — 図面に表面テクスチャを示す方法。
- IEC 950:1990, 電気ビジネス機器を含む情報技術機器の安全性。
4 つの定義
この国際規格の目的のために、次の定義が適用されます。
4.1
AC消去
減衰レベルの交番電界を利用した消去プロセス。
4.2
平均信号振幅
最小 1.40 mm にわたって測定された読み取りヘッドの信号出力の平均ピーク ツー ピーク値 (欠落したパルスを除く)
4.3
方位角
トラックの中心線に垂直な線からトラック上で記録されたフラックス遷移の角度偏差 (円弧度)
4.4
裏面
データを記録するために使用される磁気コーティングの反対側のテープの表面。
4.5
ビットセル
チャネル ビットの記録に割り当てられたトラックに沿った距離。
4.6
バイト
単位として作用するビットの順序付けられたセット。
4.7
カートリッジ
ツインリールに磁気テープを収納したケースです。
4.8
巡回冗長検査 (CRC) 文字
エラー検出に使用される文字。
4.9
エラー訂正コード
ECC
エラーの検出と修正に使用されるバイトを生成する数学的手順。
4.10
磁束遷移位置
テープ表面に垂直な最大自由空間磁束密度を示すポイント。
4.11
磁束遷移間隔
連続するフラックス遷移間のトラックに沿った距離。
4.12
磁気テープ
情報処理のためのデータの入力、出力、および保存を目的とした磁気信号を受け入れて保持するテープ。
4.13
マスター標準参照テープ
振幅、典型的なフィールド、解像度の標準として選択されたテープ。
注記 1: I マスター標準リファレンス テープは、ソニー株式会社によって確立されました。
4.14
テープの物理的な始まり
PBOT
半透明のリーダー テープが磁気テープに結合される、テープ リーダーからスプライスの不透明な領域への移行。
4.15
テープの物理的な終わり
ピート
スプライスの不透明な領域から半透明のトレーラー テープへの移行。
4.16
物理記録密度
トラックの単位長さあたりに記録されたフラックス遷移の数。ミリメートルあたりのフラックス遷移数 (ftpmm) で表されます。
4.17
二次基準振幅
2126 ftpmm のテスト記録電流で記録された場合の二次標準参照テープからの平均信号振幅。
4.18
二次参照フィールド
二次標準参照テープの典型的なフィールド。
4.19
二次標準参照テープ
マスター スタンダード リファレンス テープの性能との関連で、その性能が知られており、記載されているテープ。
これらは、定期的なキャリブレーションで使用する 3 次基準テープのキャリブレーションに使用することを目的としています。
4.20
標準基準電流
アイリッシュ
二次参照フィールドを生成する電流。
4.21
テープ基準エッジ
磁気コーティングが観察者に面し、供給リールが観察者の右側にあるときのテープの下端。
4.22
テスト記録電流
標準基準電流の 1.5 倍の電流。
4.23
調子
98 ftpmm で記録された信号。
4.24
トラック
一連の磁気遷移が記録されるテープ上の対角線上に位置する領域。
4.25
代表的な分野
2 126 ftpmm の物理記録密度での記録フィールドに対する平均信号振幅のプロットでは、最大平均信号振幅の 90% に等しい平均信号振幅を引き起こす最小フィールド。
第2節 事件の要件
セクション 3 未記録テープの要件
セクション 4 交換テープの要件
Foreword
ISO (the International Organization for Standardization) and IEC (the Inter-national Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
International Standard ISO/IEC 11319 was prepared by the European Computer Manufacturers Association (as Standard ECMA-145) and was adopted, under a special"fast-track procedure", by Joint Technical Committee ISO/IEC JTC 1, Information technology, Sub-Committee 11, Flexible magnetic media for digital data interchange, in parallel with its approval by national bodies of ISO and IEC.
Annexes A, B and C form an integral part of this International Standard. Annexes D and E are for information only.
Section 1 General
1 Scope
This International Standard specifies the physical and magnetic characteristics of an 8 mm wide magnetic tape cartridge to enable interchangeability of such cartridges. It also provides a format and recording method, thus allowing, together with ISO 1001 for Magnetic Tape Labelling, full data interchange by means of such magnetic tape cartridges.
3 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO/R 527:1966, Plastics — Determination of tensile properties.
- ISO 1001:1986, Information processing — File structure and labelling of magnetic tapes for information interchange.
- ISO 1302:1978, Technical drawings — Method of indicating surface texture on drawings.
- IEC 950:1990, Safety of Information Technology Equipment, including Electrical Business Equipment.
4 Definitions
For the purpose of this International Standard, the following definitions apply.
4.1
AC erase
A process of erasure utilizing alternating fields of decaying level.
4.2
Average Signal Amplitude
The average peak-to-peak value of the signal output of the read head measured over a minimum of 1,40 mm, exclusive of missing pulses.
4.3
azimuth
The angular deviation, in degrees of arc, of the recorded flux transitions on a track from the line normal to the track centreline.
4.4
back surface
The surface of the tape opposite to the magnetic coating used to record data.
4.5
bit cell
A distance along the track allocated for the recording of a Channel bit.
4.6
byte
An ordered set of bits acted upon as a unit.
4.7
cartridge
A case containing magnetic tape stored on twin reels.
4.8
Cyclic Redundancy Check (CRC) Character
A character used for error detection.
4.9
Error Correcting Code
ECC
A mathematical procedure yielding bytes used for the detection and correction of errors.
4.10
flux transition position
That point which exhibits the maximum free-space flux density normal to the tape surface.
4.11
flux transition spacing
The distance along a track between successive flux transitions.
4.12
magnetic tape
A tape that accepts and retains magnetic signals intended for input, output, and storage of data for information processing.
4.13
Master Standard Reference Tape
A tape selected as the standard for amplitude, Typical Field and Resolution.
Note 1 to entry: I The Master Standard Reference Tape has been established by the SONY Corporation.
4.14
Physical Beginning of Tape
PBOT
The transition from the tape leader to the opaque area of the splice by which the translucent leader tape is joined to the magnetic tape.
4.15
Physical End of Tape
PEOT
The transition from the opaque area of the splice to the translucent trailer tape.
4.16
physical recording density
The number of recorded flux transitions per unit length of track, expressed in flux transitions per millimetre (ftpmm).
4.17
Secondary Reference Amplitude
The Average Signal Amplitude from the Secondary Standard Reference Tape when it is recorded with the Test Recording Current at 2126 ftpmm.
4.18
Secondary Reference Field
The Typical Field of the Secondary Standard Reference Tape.
4.19
Secondary Standard Reference Tape
A tape the performance of which is known and stated in relation to that of the Master Standard Reference Tape.
It is intended that these be used for calibrating tertiary reference tapes for use in routine calibration.
4.20
Standard Reference Current
Ir
The current that produces the Secondary Reference Field.
4.21
Tape Reference Edge
The lower edge of the tape when the magnetic coating is facing the observer and the supply reel is to the observer’s right.
4.22
Test Recording Current
The current that is 1,5 times the Standard Reference Current.
4.23
tone
A signal recorded at 98 ftpmm.
4.24
track
A diagonally positioned area on the tape along which a series of magnetic transitions may be recorded.
4.25
Typical Field
In the plot of the Average Signal Amplitude against the recording field at the physical recording density of 2 126 ftpmm, the minimum field that causes an Average Signal Amplitude equal to 90% of the maximum Average Signal Amplitude.