この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである国家機関は、技術活動の特定の分野を扱うために、それぞれの組織によって設立された技術委員会を通じて、国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力しています。 ISO および IEC と連携して、政府および非政府の他の国際機関もこの作業に参加しています。
情報技術の分野では、ISO と IEC は合同技術委員会 ISO/IEC JTC 1 を設立しました。合同技術委員会によって採択された国際規格の草案は、投票のために各国の機関に回覧されます。国際規格として発行するには、投票を行う国の機関の少なくとも 75% による承認が必要です。
国際規格 ISO/IEC 12248 は、欧州コンピュータ製造業者協会 (ECMA) によって (規格 ECMA-171 として) 作成され、合同技術委員会 ISO/IEC JTC 1, 情報技術によって、特別な「迅速な手順」の下で採用されました。 、ISOおよびIECの国家機関による承認と並行して。
附属書 A, D, E, F, G, H, K, および M は、この規格の不可欠な部分を形成します。附属書 B, C, J, および L は情報提供のみを目的としています。
序章
ISO/IEC は、さまざまな幅と特性の磁気テープを含むカセットとカートリッジに関する一連の国際規格を作成しました。このうち、以下はヘリカルスキャン記録に関するものです。
ISO/IEC 10777:1991, 情報交換用幅 3.81mm の磁気テープ カートリッジ — ヘリカル スキャン記録 — DDS 形式
ISO/IEC 11319:1993, 情報交換用幅 8 mm の磁気テープ カートリッジ — ヘリカル スキャン記録
ISO/IEC 11321:1992, 情報交換用幅 3.81mm の磁気テープ カートリッジ — ヘリカル スキャン記録 — DATA/DAT 形式
ISO/IEC 11557:1992, 情報交換用幅 3.81 mm の磁気テープ カートリッジ — ヘリカル スキャン記録 — 60 m および 90 m の長さのテープを使用した DDS-DC フォーマット、第 2 版
ISO/IEC 12246:1993, 幅 8 mm の磁気テープ カートリッジ、情報交換用のデュアル アジマス フォーマット — ヘリカル スキャン記録
ISO/IEC 12247:1993, 情報交換用幅 3.81 mm の磁気テープ カートリッジ — ヘリカル スキャン記録 — 長さ 60 m および 90 m のテープを使用した DDS フォーマット
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
International Standard ISO/IEC 12248 was prepared by the European Computer Manufacturers Association (ECMA) (as Standard ECMA-171) and was adopted, under a special"fast-track procedure", by Joint Technical Committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC.
Annexes A, D, E, F, G, H, K and M form an integral part of this International Standard. Annexes B, C, J and L are for information only.
Introduction
ISO/IEC have produced a series of International Standards for cassettes and cartridges containing magnetic tapes of different width and characteristics. Of these, the following relate to helical scan recording.
ISO/IEC 10777:1991, 3,81 mm wide magnetic tape cartridge foR information interchange — Helical scan recording — DDS format
ISO/IEC 11319:1993, 8 mm wide magnetic tape cartridge for information interchange — Helical scan recording
ISO/IEC 11321:1992, 3,81 mm wide magnetic tape cartridge for information interchange — Helical scan Recording — DATA/DAT format
ISO/IEC 11557:1992, 3,81 mm wide magnetic tape cartridge for information interchange — Helical scan recording — DDS-DC format using 60 m and 90 m length tapes, 2nd edition
ISO/IEC 12246:1993, 8 mm wide magnetic tape cartridge, dual azimuth format for information interchange — Helical scan recording
ISO/IEC 12247:1993, 3,81 mm wide magnetic tape cartridge for information interchange — Helical scan recording — DDS format using 60 m and 90 m length tapes