この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである国家機関は、技術活動の特定の分野を扱うために、それぞれの組織によって設立された技術委員会を通じて、国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力しています。 ISO および IEC と連携して、政府および非政府の他の国際機関もこの作業に参加しています。
情報技術の分野では、ISO と IEC は合同技術委員会 ISO/IEC JTC 1 を設立しました。合同技術委員会によって採択された国際規格の草案は、投票のために各国の機関に回覧されます。国際規格として発行するには、投票を行う国の機関の少なくとも 75% による承認が必要です。
国際規格 ISO/IEC 13246 は、合同技術委員会 ISO/IEC JTC 1, 情報技術、小委員会 SC 6, 電気通信およびシステム間の情報交換によって作成されました。
附属書 A は、この規格の不可欠な部分を形成します。附属書 B および С は情報提供のみを目的としています。
序章
この国際規格は、Broadband Private Integrated Services Networks (B-PISN) に適用可能なサービスとシグナリング プロトコルを定義する一連の国際規格の 1 つです。このシリーズは、ITU-T によって開発された B-ISDN の概念を使用し、ISO/IEC によって定義されたオープン システム相互接続の国際標準のフレームワークに準拠しています。
この特定の国際標準では、Q 基準点 (B-QSIG SAAL) で使用する Signaling ATM Adaptation Layer (SAAL) プロトコルを指定しています。
1 スコープ
この国際規格は、B-QSIG シグナリング システム プロトコル ファミリのフレームワーク内で、ブロードバンド PINX 間およびブロードバンド PISN 間のインターフェイスで使用されるシグナリング ATM アダプテーション レイヤ (SAAL) プロトコルを指定します。 B-QSIG SAAL は、ATM レイヤーが提供する機能を使用し、B-QSIG レイヤー 3 シグナリング プロトコルが必要とするサービスを提供します。
3 参考文献
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO/IEC 9646-1:1994, 情報技術 — オープン システム相互接続 — 適合性テストの方法論とフレームワーク — 1: 一般的な概念。
- ISO/IEC 9646-7:1995, 情報技術 — オープン システム相互接続 — 適合性テストの方法論とフレームワーク — 7: 実装適合宣言。
- ITU-T Rec. I.32, B-ISDN プロトコル参照モデルとそのアプリケーション。
- ITU-T Rec. I.36, B-ISDN ATM レイヤ仕様。
- ITU-T Rec. I.36, B-ISDN ATM アダプテーション レイヤ (AAL) 機能の説明。
- ITU-T Rec. I.363., B-ISDN ATM アダプテーション レイヤー (AAL) 仕様 — 5: AAL タイプ
- ITU-T Rec. I.37, B-ISDN におけるトラフィック制御と輻輳制御。
- ITU-T Rec. Q.210, B-ISDN Signaling ATM Adaptation Layer Overview Descriptio
- ITU-T Rec. Q.211, B-ISDN ATM アダプテーション レイヤ — Service Specific Connection Oriented Protoco, B-ISDN Signaling ATM Adaptation Layer — User-to-Network インターフェイス (UNI の SSCF) でのシグナリングをサポートするための Service Specific Coordination Functio
4 つの定義
この国際規格の目的のために、ITU-T 勧告 I.363.5, Q.2110, および Q.2130 で与えられた定義が適用されます。
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
International Standard ISO/IEC 13246 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 6, Telecommunications and information exchange between systems.
Annex A forms an integral part of this International Standard. Annexes B and С are for information only.
Introduction
This International Standard is one of a series of International Standards defining services and signalling protocols applicable to Broadband Private Integrated Services Networks (B-PISNs). The series uses B-ISDN concepts as developed by ITU-T and conforms to the framework of International Standards for Open Systems Interconnection as defined by ISO/IEC.
This particular International Standard specifies the Signalling ATM Adaptation Layer (SAAL) protocol for use at the Q reference point (B-QSIG SAAL).
1 Scope
This International Standard specifies the signalling ATM adaptation layer (SAAL) protocol used at the interface between Broadband PINXs and between Broadband PISNs within the framework of the B-QSIG signalling system protocol family. The B-QSIG SAAL uses the functions provided by the ATM layer, and provides the services required by the B-QSIG Layer 3 signalling protocols.
3 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO/IEC 9646-1:1994, Information technology — Open Systems Interconnection — Conformance testing methodology and framework — 1: General concepts.
- ISO/IEC 9646-7:1995, Information technology — Open Systems Interconnection — Conformance testing methodology and framework — 7: Implementation Conformance Statements.
- ITU-T Rec. I.321 (1991), B-ISDN Protocol Reference Model and Its Application.
- ITU-T Rec. I.361 (1993), B-ISDN ATM Layer Specification.
- ITU-T Rec. I.362 (1993), B-ISDN ATM Adaptation Layer (AAL) Functional Description.
- ITU-T Rec. I.363.5 (1996), B-ISDN ATM Adaptation Layer (AAL) Specification — 5: AAL Type 5.
- ITU-T Rec. I.371 (1996), Traffic control and congestion control in B-ISDN.
- ITU-T Rec. Q.2100 (1994), B-ISDN Signalling ATM Adaptation Layer Overview Description.
- ITU-T Rec. Q.2110 (1994), B-ISDN ATM Adaptation Layer — Service Specific Connection Oriented Protocol (SSCOP).
- ITU-T Rec. Q.2130 (1994), B-ISDN Signalling ATM Adaptation Layer — Service Specific Coordination Function for Support of Signalling at the User-to-Network Interface (SSCF at UNI).
4 Definitions
For the purposes of this International Standard, the definitions given in ITU-T Recommendations I.363.5, Q.2110 and Q.2130 apply.