この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである国家機関は、技術活動の特定の分野を扱うために、それぞれの組織によって設立された技術委員会を通じて、国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力しています。 ISO および IEC と連携して、政府および非政府の他の国際機関もこの作業に参加しています。
情報技術の分野では、ISO と IEC は合同技術委員会 ISO/IEC JTC 1 を設立しました。合同技術委員会によって採択された国際規格の草案は、投票のために各国の機関に回覧されます。国際規格として発行するには、投票を行う国の機関の少なくとも 75% による承認が必要です。
国際標準 ISO/IEC 13421 は、欧州コンピュータ製造業者協会 (ECMA) によって (標準 ECMA-182 として) 作成され、合同技術委員会 ISO/IEC JTC 1, 情報技術によって、特別な「迅速な手順」の下で採用されました。 、ISOおよびIECの国家機関による承認と並行して。
附属書 A から E は、この規格の不可欠な部分を形成します。附属書 F から J は情報提供のみを目的としています。
特許
ECMA 標準の準備中に、標準の適用が依存する可能性のある特許に関する情報が収集されました。関連する特許は、Digital Equipment Corporation に属するものとして特定されました。ただし、ECMA も ISO/IEC も、証拠、有効性、または特許および同様の権利の範囲に関する信頼できる情報または包括的な情報を提供することはできません。特許権者は、ライセンスは合理的かつ非差別的な条件で付与されると述べています。この件に関する連絡先は、
デジタル・イクイップメント・コーポレーション
334 サウス ストリート
シュルーズベリー
マサチューセッツ州 01545-4112
アメリカ
序章
国際規格 ISO 9661 および ISO/IEC 11559 は、12.7 mm, 18 トラックの磁気テープ カートリッジでのデータ交換を規定しています。
国際規格 13421 は、これらの国際規格とは異なるタイプのカートリッジに関するものです。磁気テープも 12.7 mm 幅ですが、48 の物理トラックに記録されます。また、これらの以前の国際規格とはフォーマットが異なります。ペアで記録および読み取りされる物理トラックが 2 つのグループを構成し、最初は順方向で記録および読み取りされ、2 番目は逆方向であるという事実によって特徴付けられます。
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a joint technical committee ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
International Standard ISO/IEC 13421 was prepared by the European Computer Manufacturers Association (ECMA) (as Standard ECMA-182) and was adopted, under a special"fast-track procedure", by Joint Technical Committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC.
Annexes A to E form an integral part of this International Standard. Annexes F to J are for information only.
Patents
During the preparation of the ECMA standard, information was gathered on patents upon which application of the standard might depend. Relevant patents were identified as belonging to Digital Equipment Corporation. However, neither ECMA nor ISO/IEC can give authoritative or comprehensive information about evidence, validity or scope of patent and like rights. The patent holders have stated that licences will be granted under reasonable and non-discriminatory terms. Communications on this subject should be addressed to
Digital Equipment Corporation
334 South Street
Shrewsbury
Massachusetts 01545-4112
USA
Introduction
International Standards ISO 9661 and ISO/IEC 11559 specify data interchange on 12,7 mm, 18-track magnetic tape cartridges.
International Standard 13421 concerns a cartridge of a type different from that of those International Standards. Whilst the magnetic tape is also 12,7 mm wide, it is recorded on 48 physical tracks. Also the format is different from that of these previous International Standards. It is characterized by the fact that the physical tracks, recorded and read in pairs, constitute two groups, the first recorded and read in forward direction, the second in reverse direction.