※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである国家機関は、技術活動の特定の分野を扱うために、それぞれの組織によって設立された技術委員会を通じて、国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力しています。 ISO および IEC と連携して、政府および非政府の他の国際機関もこの作業に参加しています。
情報技術の分野では、ISO と IEC は合同技術委員会 ISO/IEC JTC 1 を設立しました。合同技術委員会によって採択された国際規格の草案は、投票のために各国の機関に回覧されます。国際規格として発行するには、投票を行う国の機関の少なくとも 75% による承認が必要です。
国際標準 ISO/IEC 13818-9 は、合同技術委員会 ISO/IEC JTC 1, 情報技術、小委員会 SC 29, オーディオ、画像、マルチメディア、およびハイパーメディア情報のコーディングによって作成されました。
ISO/IEC 13818 は、次の部分で構成され、一般的なタイトルは「情報技術 — 動画および関連する音声情報の一般的なコーディング」です。
- Part 1: システム
- Part 2: ビデオ
- Part 3: オーディオ
- Part 4: コンプライアンス テスト
- Part 6: DSM-CC の拡張
- Part 9: システム デコーダのリアルタイム インターフェイスの拡張
序章
ISO/IEC 13818-1 トランスポート ストリームの適合性は、そこで定義されている標準仕様の観点から指定されています。これらの仕様には、他の要件の中でも特に、トランスポート ストリーム システム ターゲット デコーダー (T-STD) (ISO/IEC 13818-1, 2.4.2) が含まれます。これは、ストリームがそのようなデコーダーに入力されたときの理想化されたデコーダーの動作を指定します。 T-STD モデルと関連する検証には、リアルタイムのストリームに関する情報は含まれていません。
ISO/IEC 13818 のこの部分は、Real Time Interface (RTI) でのトランスポート ストリーム パケットのバイトのリアルタイム配信のタイミングを指定します。トランスポート ストリーム データ用のある種のインターフェイスを含み、そのタイミング特性が RTI 仕様に準拠していると言われている機器は、RTI 仕様に準拠している任意の入力で正常に動作できなければなりません。ただし、RTI インターフェイスを実装するために機器が必要になることはありません。
1 スコープ
ISO/IEC 13818 のこの部分は、ISO/IEC 13818-1 の要件を変更したり置き換えたりするものではありません。すべてのトランスポート ストリームは、RTI に従って配信されるかどうかにかかわらず、ISO/IEC 13818-1 に準拠する必要があります。特に、トランスポート ストリームの PCR に対する ISO/IEC 13818-1 の精度要件は、ISO/IEC 13818 のこの部分の要件によって変更されません。ISO/IEC 13818 のこの部分への準拠は、ISO/ IEC 13818-
ISO/IEC 13818 のこの部分は、クロックの取得とスルー レートの制約に関連するデコーダの要件には対応していません。たとえば、システムが 27 MHz システム クロックを使用して、4.434 MHz の ITU-R PAL クロマ クロックを生成し、0.1 Hz/秒のスルー レート制限があるとします。精度 0.1 ppm のソース クロック、精度 30 ppm のデコーダ クロック、および単純なフェーズロック ループ クロック リカバリ回路を備えたデコーダは、低ジッター配信であっても、周波数取得中のバッファ アンダー/オーバーフローを防ぐために約 305,000 ビットを必要とする可能性があります。 .この目的のためにデコーダーが必要とする実際のビット数は、実装によって異なります。
図 1 は、ISO/IEC 13818 のこの部分の範囲の簡略図を提供します。この図は、データ リンク インターフェイス アダプター、リアルタイム インターフェイス デコーダー (RTD)、および RTI 仕様に準拠するトランスポート ストリームの場所を示しています。 .データ リンク インターフェース アダプタは、準拠する RTI トランスポート ストリームを生成するために、データ リンク プロトコルまたはデータ構造、およびタイミング変動 (ジッタ) を除去する役割を果たします。
図 1 — RTI の範囲
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
International Standard ISO/IEC 13818-9 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information.
ISO/IEC 13818 consists of the following parts, under the general title Information technology — Generic coding of moving pictures and associated audio information:
- Part 1: Systems
- Part 2: Video
- Part 3: Audio
- Part 4: Compliance testing
- Part 6: Extensions for DSM-CC
- Part 9: Extension for real time interface for systems decoders
Introduction
Conformance for ISO/IEC 13818-1 Transport Streams is specified in terms of the normative specifications defined therein. These specifications include, among other requirements, a Transport Stream System Target Decoder (T-STD) (ISO/IEC 13818-1, 2.4.2) which specifies the behaviour of an idealized decoder when the stream is input to such a decoder. The T-STD model, and the associated verification, do not include information concerning the stream in real time.
This part of ISO/IEC 13818 specifies the timing of the real-time delivery of the bytes of Transport Stream packets at a Real Time Interface (RTI). Equipment which includes some type of interface for Transport Stream data, the timing characteristics of which are said to comply with the RTI specification, must be able to operate normally with any input which complies with the RTI specification. In no case, however, is a piece of equipment required to implement an RTI interface.
1 Scope
This part of ISO/IEC 13818 does not change or supersede any of the requirements in ISO/IEC 13818-1. All Transport Streams, whether or not they are delivered in accordance with the RTI shall comply with ISO/IEC 13818-1. In particular, the accuracy requirement in ISO/IEC 13818-1 for PCRs in Transport Streams is not changed by the requirements of this part of ISO/IEC 13818. Compliance with this part of ISO/IEC 13818 is not required for compliance with ISO/IEC 13818-1.
This part of ISO/IEC 13818 does not address decoder requirements related to clock acquisition and slew rate constraints. For example, suppose a system utilizes the 27 MHz system clock to derive an ITU-R PAL chroma clock of 4.434 MHz, with a 0.1 Hz/sec slew rate limitation. With a source clock of 0.1 ppm accuracy, a decoder clock of 30 ppm accuracy, and straightforward phase-locked loop clock recovery circuitry, a decoder could require about 305,000 bits to prevent buffer under/overflow during frequency acquisition, even with low-jitter delivery. The actual number of bits a decoder requires for this purpose could be higher or lower, depending on the implementation.
Figure 1 provides a simplified view of the scope of this part of ISO/IEC 13818. This figure shows a Data Link Interface Adaptor, a Real-Time Interface Decoder (RTD), and the location of the Transport Stream which complies with the RTI Specification. It should be noted that the Data Link Interface Adaptor is responsible for removing any data link protocol or data structures, as well as any timing variations (i.e. jitter) in order to produce a compliant RTI Transport Stream.
Figure 1—Scope of RTI