この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである国家機関は、技術活動の特定の分野を扱うために、それぞれの組織によって設立された技術委員会を通じて、国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力しています。 ISO および IEC と連携して、政府および非政府の他の国際機関もこの作業に参加しています。
情報技術の分野では、ISO と IEC が合同技術委員会 ISO/IEC JTC1 を設立しました。合同技術委員会によって採択された国際規格草案は、投票のために各国の機関に回覧されます。国際規格として発行するには、投票を行う国の機関の少なくとも 75% による承認が必要です。
国際規格 ISO/IEC 14169 は、ECMA からの文書のサポートと寄稿を受けて、日本工業規格委員会 (規格 JIS X 6228-1994 として) によって作成され、合同技術委員会 ISO/IEC による特別な「迅速な手順」の下で採用されました。 JTC1, 情報技術、 ISO および IEC の国家機関による承認と並行。
附属書 A から L は、この規格の不可欠な部分を形成します。附属書 M から T は情報提供のみを目的としています。
序章
この国際規格は、21 MB のフォーマット済み容量の 90 mm フレキシブル ディスク カートリッジの特性を指定します。このカートリッジは、内側ゾーンで 31 831 フィートプラド、外側ゾーンで 47 747 フィートプラドで記録され、両側の 326 データ トラックでセクタ サーボ トラッキングが行われます。 7 RLL録音。
この国際規格は、記録されていないディスクの物理的な互換性と、記録されたデータ トラックとサーボ トラックのフォーマットの互換性を規定しています。
ISO/IEC 9983 を参照して、この国際規格に準拠するフレキシブル ディスク カートリッジは、ISO タイプ 305 として指定されています。
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and nongovernmental, in liaison with ISO and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
International Standard ISO/IEC 14169 was prepared by the Japanese Industrial Standards Committee (as Standard JIS X 6228-1994) with document support and contribution from ECMA and was adopted, under a special “fast-track procedure” by Joint Technical Committee ISO/IEC JTC1, Information technology, in parallel with its approval by national bodies of ISO and IEC.
Annexes A to L form an integral part of this International Standard. Annexes M to T are for information only.
Introduction
This International Standard specifies the characteristics of 90 mm flexible disk cartridges of 21 MBytes formatted capacity, recorded at 31 831 ftprad in the Inner Zone and 47 747 ftprad in the Outer Zone with sector servo tracking on 326 Data Tracks on each side, using 2-7 RLL recording.
This International Standard specifies the physical interchangeability of the unrecorded disk and the format interchangeability of recorded Data Tracks and Servo Tracks.
In reference to ISO/IEC 9983, flexible disk cartridges conforming to this International Standard are designated as ISO Type 305.