※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである国家機関は、技術活動の特定の分野を扱うために、それぞれの組織によって設立された技術委員会を通じて、国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力しています。 ISO および IEC と連携して、政府および非政府の他の国際機関もこの作業に参加しています。情報技術の分野では、ISO と IEC が合同技術委員会 ISO/IEC JTC 1 を設立しました。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
合同技術委員会の主な任務は、国際規格を作成することです。合同技術委員会によって採択された国際規格草案は、投票のために各国の機関に回覧されます。国際規格として発行するには、投票を行う国の機関の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO および IEC は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO/IEC 15052 は、ECMA によって (ECMA-214 として) 作成され、特別な「ファストトラック手順」の下で、合同技術委員会 ISO/IEC JTC 1, 情報技術によって採用されました。 ISOおよびIE
この第 2 版は、技術的に改訂された第 1 版 (ISO/IEC 15052:1997) を取り消して置き換えるものです。
序章
この国際規格は、プライベート統合サービス ネットワーク (PISN) に適用可能なサービスおよびシグナリング プロトコルを定義する一連の規格の 1 つです。このシリーズは、ITU-T によって開発された ISDN の概念を使用し、ISO/IEC によって定義されたオープン システム相互接続の国際標準のフレームワークに準拠しています。
この国際規格は、リコール補助サービスをサポートするために Q 基準点で使用するシグナリング プロトコルを指定します。この国際規格で定義されているプロトコルは、PSS1 プロトコル (非公式には QSIG として知られています) の一部を形成しています。
この国際規格は、ECMA メンバー企業の実際の経験と、ISO/IEC JTC 1, ITU-T, ETSI, およびその他の国際および国内の標準化団体の作業への積極的かつ継続的な参加の結果に基づいています。これは、実用的で広く基づいたコンセンサスを表しています。
1 スコープ
この国際規格は、私設統合サービス ネットワーク (PISN) 内で相互に接続された私設統合サービス ネットワーク交換機 (PINX) 間の Q 基準点で、リコール補足サービス (SS-RE) をサポートするためのシグナリング プロトコルを指定します。
SS-RE は、コールが応答されない場合に、転送されたコールをサービス対象のユーザにリダイレクトするための補助サービスです。 SS-RE は、再ルーティングによる転送ではなく、結合による転送後にのみ適用されます。
Q 基準点は、ISO/IEC 11579-1 で定義されています。
サービス仕様は、ETS 300 387 で指定された方法に従って 3 段階で作成されます。この国際規格には、Q 基準点の第 3 段階の仕様が含まれており、ISO/IEC 15051 の第 1 段階および第 2 段階の仕様によって特定された要件を満たしています。 SS-RE のシグナリング プロトコルは、ISO/IEC 11572 で指定されているように、基本的な回線交換呼制御のシグナリング プロトコルの上で動作し、ISO/IEC 11582 で指定されている補足サービスの制御のための一般的な手順の特定の側面を使用します。
この国際規格は、SS-RE とその他の補足サービスおよび ANF との間の Q 基準点での相互作用をサポートするための追加のシグナリング プロトコル要件も指定します。ただし、呼転送補助サービスとの対話は、SS-RE シグナリング手順の一部として指定されています。これは、リコール補助サービスの重要な側面であるためです。
注 — Q 基準点でのシグナリング プロトコルに影響を与えない追加の相互作用は、関連するステージ 1 仕様に記載されています。
この国際規格は、相互接続して PISN を形成できる PINX に適用されます。
3 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO/IEC 11572:2000, 情報技術 — システム間の電気通信および情報交換 — プライベート統合サービス ネットワーク — 回線モード ベアラ サービス — 交換機間シグナリング手順およびプロトコル
- ISO/IEC 11574:2000, 情報技術 — システム間の電気通信および情報交換 — プライベート統合サービス ネットワーク — 回線モード 64 kbit/s ベアラ サービス — サービス記述、機能能力、および情報フロー
- ISO/IEC 11579-1:1994, 情報技術 — システム間の電気通信および情報交換 — プライベート統合サービス ネットワーク — 1: PISN Exchanges (PINX) のリファレンス構成
- ISO/IEC 11582:2002, 情報技術 — システム間の電気通信および情報交換 — プライベート統合サービス ネットワーク — 補足サービスをサポートするための汎用機能プロトコル — 交換機間シグナリング手順およびプロトコル
- ISO/IEC 13865:2003, 情報技術 — システム間の電気通信および情報交換 — プライベート統合サービス ネットワーク — 仕様、機能モデル、および情報の流れ — 通話転送補足サービス
- ISO/IEC 13868:2003, 情報技術 — システム間の電気通信および情報交換 — プライベート統合サービス ネットワーク — 交換間シグナリング プロトコル — 名前識別補助サービス
- ISO/IEC 13869:2003, 情報技術 — システム間の電気通信および情報交換 — プライベート統合サービス ネットワーク — 交換機間シグナリング プロトコル — 通話転送補足サービス
- ISO/IEC 13873:2003, 情報技術 — システム間の電気通信および情報交換 — プライベート統合サービス ネットワーク — 交換機間シグナリング プロトコル — 着信転送補助サービス
- ISO/IEC 15051:2003, 情報技術 — システム間の電気通信および情報交換 — プライベート統合サービス ネットワーク — 仕様、機能モデルおよび情報フロー — リコール補足サービス
- ISO/IEC 15054:2003, 情報技術 — システム間の電気通信および情報交換 — プライベート統合サービス ネットワーク — 交換機間シグナリング プロトコル — 通話傍受の追加ネットワーク機能
- ETS 300 387:1994, プライベート通信ネットワーク (PTN)基本サービス及び付帯サービスの指定方法
- ITU-T Rec. I.112:1993, ISDN の用語集
- ITU-T Rec. I.210:1993, ISDN によってサポートされる電気通信サービスの原則とそれらを記述する手段
- ITU-T Rec. Z.100:1999, 仕様および記述言語 (SDL)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 15052 was prepared by ECMA (as ECMA-214) and was adopted, under a special “fast-track procedure”, by Joint Technical Committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC.
This second edition cancels and replaces the first edition (ISO/IEC 15052:1997), which has been technically revised.
Introduction
This International Standard is one of a series of Standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to the framework of International Standards for Open Systems Interconnection as defined by ISO/IEC.
This International Standard specifies the signalling protocol for use at the Q reference point in support of the Recall supplementary service. The protocol defined in this International Standard forms part of the PSS1 protocol (informally known as QSIG).
This International Standard is based upon the practical experience of ECMA member companies and the results of their active and continuous participation in the work of ISO/IEC JTC 1, ITU-T, ETSI and other international and national standardization bodies. It represents a pragmatic and widely based consensus.
1 Scope
This International Standard specifies the signalling protocol for the support of Recall supplementary service (SS-RE) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within Private Integrated Services Network (PISN).
SS-RE is a supplementary service which provides for the re-direction of a transferred call back to the served user if the call is unanswered. SS-RE is only applicable after transfer by join, not after transfer by rerouteing.
The Q reference point is defined in ISO/IEC 11579-1.
Service specifications are produced in three stages and according to the method specified in ETS 300 387. This International Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 15051. The signalling protocol for SS-RE operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582.
This International Standard also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between SS-RE and other supplementary services and ANFs. However, the interaction with the Call Transfer supplementary service is specified as part of SS-RE signalling procedures as it is the essential aspect of the Recall supplementary service.
NOTE — Additional interactions that have no impact on the signalling protocol at the Q reference point can be found in the relevant stage 1 specifications.
This International Standard is applicable to PINXs which can be interconnected to form a PISN.
3 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO/IEC 11572:2000, Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Circuit mode bearer services — Inter-exchange signalling procedures and protocol
- ISO/IEC 11574:2000, Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Circuit-mode 64 kbit/s bearer services — Service description, functional capabilities and information flows
- ISO/IEC 11579-1:1994, Information technology — Telecommunications and information exchange between systems — Private integrated services network — 1: Reference configuration for PISN Exchanges (PINX)
- ISO/IEC 11582:2002, Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Generic functional protocol for the support of supplementary services — Inter-exchange signalling procedures and protocol
- ISO/IEC 13865:2003, Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Call Transfer supplementary service
- ISO/IEC 13868:2003, Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Name identification supplementary services
- ISO/IEC 13869:2003, Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Call Transfer supplementary service
- ISO/IEC 13873:2003, Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Call Diversion supplementary services
- ISO/IEC 15051:2003, Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Recall supplementary service
- ISO/IEC 15054:2003, Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Call Interception additional network feature
- ETS 300 387:1994, Private Telecommunication Network (PTN); Method for the specification of basic and supplementary services
- ITU-T Rec. I.112:1993, Vocabulary of terms for ISDNs
- ITU-T Rec. I.210:1993, Principles of telecommunication services supported by an ISDN and the means to describe them
- ITU-T Rec. Z.100:1999, Specification and description language (SDL)