この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである各国機関は、特定の技術活動分野に対処するためにそれぞれの組織によって設立された技術委員会を通じて国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力します。政府および非政府の他の国際機関も、ISO および IEC と連携してこの作業に参加しています。情報技術の分野では、ISO と IEC は共同技術委員会 ISO/IEC JTC 1 を設立しました。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
合同技術委員会の主な任務は、国際規格を作成することです。合同技術委員会によって採択された国際規格草案は、投票のために各国機関に配布されます。国際規格として発行するには、投票を行っている国家機関の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO および IEC は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO/IEC 15991 は ECMA によって (ECMA-263 として) 作成され、特別な「ファストトラック手順」に基づいて、各国の各国機関による承認と並行して、合同技術委員会 ISO/IEC JTC 1 (情報技術)によって採択されました。 ISO および IE
この第 2 版は、技術的に改訂された第 1 版 (ISO/IEC 15991:1998) を廃止し、置き換えるものです。
導入
この国際標準は、プライベート統合サービス ネットワーク (PISN) に適用されるサービスとシグナリング プロトコルを定義する一連の標準の 1 つです。このシリーズは、ITU-T によって開発された ISDN 概念を使用し、ISO/IEC によって定義されたオープン システム相互接続の国際標準のフレームワークに準拠しています。
この国際標準は、優先通話中断 (CPI) および優先通話中断保護 (CPIP) の補足サービスを規定しています。
この国際規格は、ECMA 会員企業の実践経験と、ISO/IEC JTC 1, ITU-T, ETSI, およびその他の国際および国内標準化団体の作業への積極的かつ継続的な参加の結果に基づいています。これは実用的で広範に基づいたコンセンサスを表しています。
1 スコープ
この国際規格は、補足サービス通話優先度割り込み (SS-CPI) および優先度通話割り込み保護 (SS-CPIP) を規定しており、これらはプライベート統合サービス ネットワーク (PISN) によってサポートされるさまざまな基本サービスに適用されます。基本サービスは ISO/IEC 11574 で規定されています。
注 1 —この国際規格のこの版は、回線モードの多重速度ベアラー サービスには適用されません。
SS-CPI は、利用可能なユーザー情報チャネルがない場合に、優先通話の通話要求を正常に続行できるようにする補足サービスです。これは、確立された優先度の低いコールを強制的に解放することによって実現されます。
SS-CPIP は、他の優先通話による割り込みから通話を保護できる補足サービスです。
SS-CPI は発信側ユーザによって使用されるサービスであり、SS-CPIP は発信側ユーザまたは着信側ユーザによって使用されるサービスであるため、SS-CPI と SS-CPIP は個別に説明されます。
補足サービス仕様は、ETS 300 387 に記載されている方法に従って、3 段階で作成されます。この国際規格には、SS-CPI のステージ 1 およびステージ 2 仕様が含まれています。ステージ 1 仕様 (第 6 条) は、一般的な機能の原則と機能を指定します。ステージ 2 仕様 (第 7 条) は、補足サービスに関与する機能エンティティとそれらの間の情報フローを特定します。
3 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO/IEC 11574:2000, 情報技術 — システム間の電気通信および情報交換 — プライベート統合サービスネットワーク — サーキットモード 64 kbit/s ベアラーサービス — サービスの説明、機能能力および情報フロー
- ISO/IEC 11579-1:1994, 情報技術 — システム間の通信および情報交換 — プライベート統合サービス ネットワーク — Part 1: PISN 交換 (PINX) の参照構成
- ISO/IEC 13863:1998, 情報技術 — システム間の電気通信および情報交換 — プライベート統合サービス ネットワーク — 仕様、機能モデルおよび情報フロー — パス置換の追加ネットワーク機能
- ISO/IEC 13865:2003, 情報技術 — システム間の電気通信および情報交換 — プライベート統合サービス ネットワーク — 仕様、機能モデルおよび情報フロー — 通話転送補足サービス
- ISO/IEC 13866:1995, 情報技術 — システム間の電気通信および情報交換 — プライベート統合サービス ネットワーク — 仕様、機能モデルおよび情報フロー — 通話完了補助サービス
- ISO/IEC 13872:2003, 情報技術 — システム間の電気通信および情報交換 — プライベート統合サービス ネットワーク — 仕様、機能モデルおよび情報フロー — 通話転送補足サービス
- ISO/IEC 15053:2003, 情報技術 — システム間の電気通信および情報交換 — プライベート統合サービス ネットワーク — 仕様、機能モデルおよび情報フロー — 通話インターセプトの追加ネットワーク機能
- ETS 300 387:1994, プライベート電気通信ネットワーク (PTN)基本サービスおよび付加サービスの指定方法
- ITU-T Rec. I.112:1993, ISDN の用語の語彙
- ITU-T Rec. I.210:1993, ISDN によってサポートされる電気通信サービスの原則とそれを記述する手段
- ITU-T Rec. Z.100:1999, 仕様および記述言語 (SDL)
4 用語と定義
この文書の目的上、次の用語と定義が適用されます。
4.1 外部定義
この国際規格では、他の文書で定義されている次の用語を使用します。
| — | 基本サービス | (ITU-T 勧告 I.210) |
| — | プライベート統合サービス ネットワーク (PISN) | (ISO/IEC 11579-1) |
| — | プライベート統合サービス ネットワーク交換 (PINX) | (ISO/IEC 11579-1) |
| — | サービス | (ITU-T 勧告 1.112) |
| — | シグナリング | (ITU-T 勧告 1.112) |
| — | 付帯サービス | (ITU-T 勧告 I.210) |
| — | ユーザー | (ISO/IEC 11574) |
この国際規格は、ISO/IEC 11574 で定義されている次の基本的な呼び出し機能エンティティ (FE) を指します。
- 通話制御 (CC)
- 通話制御エージェント (CCA)
この国際規格は、ISO/IEC 11574 で定義されている次の基本的なコール間の FE 関係を指します。
- r1
- r2
- r3
この国際規格は、ISO/IEC 11574 で定義されている次の基本的な通話情報フローを指します。
- 切断要求/指示
- RELEASE要求/指示
- SETUP要求/指示
4.2 追加のネットワーク機能
基本サービスを超える機能。PISN によって提供されますが、PISN ユーザーに直接提供されるわけではありません。
4.3 通話、基本通話
基本サービスの利用例です。
4.4 通話優先度割り込み能力レベル (CPICL)
通話の優先順位を示すパラメータ。
4.5 通話優先度割り込み保護レベル (CPIPL)
他の通話からの割り込みに対する通話の保護レベルを示すパラメータ。
4.6 確立された通話
割り込み対象として選択されたアクティブな通話。
4.7 優先割り込み差し迫った状態
差し迫った優先割り込み警告通知が提供された後、確立された通話が解放される前の、確立された通話と優先通話の状態。
4.8 優先度割り込み間近の警告通知
確立された通話が解放される前に提供される通知。
4.9 非優先通話
CPICL 値が割り当てられていないコール。
4.10 優先通話
ゼロより大きい CPICL 値を持つコール。
注 2 —優先通話は保護された通話である場合もあります。
4.11 保護された通話
ゼロより大きい CPIPL 値を持つ呼び出し。
注 3 —保護された通話は優先通話になる場合もあります。
4.12 サービス対象ユーザー
SS-CPI および/または SS-CPIP を要求するユーザー。
4.13 優先割り込みまでの時間
差し迫った優先度の割り込み状態の継続時間。
4.14 保護されていない通話
CPIPL 値が割り当てられていないか、CPIPL 値が 0 に等しいコール。
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 15991 was prepared by ECMA (as ECMA-263) and was adopted, under a special"fast-track procedure", by Joint Technical Committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC.
This second edition cancels and replaces the first edition (ISO/IEC 15991:1998), which has been technically revised.
Introduction
This International Standard is one of a series of Standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to the framework of International Standards for Open Systems Interconnection as defined by ISO/IEC.
This International Standard specifies the Call Priority Interruption (CPI) and Call Priority Interruption Protection (CPIP) supplementary services.
This International Standard is based upon the practical experience of ECMA member companies and the results of their active and continuous participation in the work of ISO/IEC JTC 1, ITU-T, ETSI and other international and national standardization bodies. It represents a pragmatic and widely based consensus.
1 Scope
This International Standard specifies the Supplementary Services Call Priority Interruption (SS-CPI) and Call Priority Interruption Protection (SS-CPIP), which are applicable to various basic services supported by Private Integrated Services Networks (PISN). Basic services are specified in ISO/IEC 11574.
NOTE 1 — This edition of this International Standard does not apply to the circuit-mode Multiple Rate Bearer Service.
SS-CPI is a supplementary service that allows a call request for a priority call to proceed successfully in the case that there is no user information channel available. This is accomplished by force releasing an established call of lower priority.
SS-CPIP is a supplementary service that allows for the protection of calls against interruption from other, priority, calls.
SS-CPI and SS-CPIP are described separately because SS-CPI is a service used by a calling user, and SS-CPIP is a service used by either a calling user or a called user.
Supplementary service specifications are produced in three stages, according to the method described in ETS 300 387. This International Standard contains the stage 1 and stage 2 specifications of SS-CPI. The stage 1 specification (clause 6) specifies the general feature principles and capabilities. The stage 2 specification (clause 7) identifies the Functional Entities involved in the supplementary service and the information flows between them.
3 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO/IEC 11574:2000, Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Circuit-mode 64 kbit/s bearer services — Service description, functional capabilities and information flows
- ISO/IEC 11579-1:1994, Information technology — Telecommunications and information exchange between systems — Private integrated services network — Part 1: Reference configuration for PISN Exchanges (PINX)
- ISO/IEC 13863:1998, Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Path replacement additional network feature
- ISO/IEC 13865:2003, Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Call Transfer supplementary service
- ISO/IEC 13866:1995, Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Call completion supplementary services
- ISO/IEC 13872:2003, Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Call Diversion supplementary services
- ISO/IEC 15053:2003, Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Call Interception additional network feature
- ETS 300 387:1994, Private Telecommunication Network (PTN); Method for the specification of basic and supplementary services
- ITU-T Rec. I.112:1993, Vocabulary of terms for ISDNs
- ITU-T Rec. I.210:1993, Principles of telecommunication services supported by an ISDN and the means to describe them
- ITU-T Rec. Z.100:1999, Specification and description language (SDL)
4 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
4.1 External definitions
This International Standard uses the following terms defined in other documents:
| — | Basic service | (ITU-T Rec. I.210) |
| — | Private Integrated Services Network (PISN) | (ISO/IEC 11579-1) |
| — | Private Integrated services Network eXchange (PINX) | (ISO/IEC 11579-1) |
| — | Service | (ITU-T Rec. 1.112) |
| — | Signalling | (ITU-T Rec. 1.112) |
| — | Supplementary Service | (ITU-T Rec. I.210) |
| — | User | (ISO/IEC 11574) |
This International Standard refers to the following basic call Functional Entities (FE) defined in ISO/IEC 11574:
- Call Control (CC)
- Call Control Agent (CCA)
This International Standard refers to the following basic call inter-FE relationships defined in ISO/IEC 11574:
- r1
- r2
- r3
This International Standard refers to the following basic call information flows defined in ISO/IEC 11574:
- DISCONNECT request/indication
- RELEASE request/indication
- SETUP request/indication
4.2 Additional network feature
A capability, over and above that of a basic service, provided by a PISN, but not directly to a PISN user.
4.3 Call, Basic call
An instance of the use of a basic service.
4.4 Call Priority Interruption Capability Level (CPICL)
A parameter indicating the priority of a call.
4.5 Call Priority Interruption Protection Level (CPIPL)
A parameter indicating a level of protection of a call against interruption from other calls.
4.6 Established call
The active call that is selected for interruption.
4.7 Impending priority interruption state
The condition of an established call and a priority call after provision of an Impending priority interruption warning notification and before the release of the established call.
4.8 Impending priority interruption warning notification
A notification provided before the release of the established call.
4.9 Non-priority call
A call that has not been assigned a CPICL value.
4.10 Priority call
A call that has a CPICL value greater than zero.
NOTE 2 — A priority call may also be a protected call.
4.11 Protected call
A call that has a CPIPL value greater than zero.
NOTE 3 — A protected call may also be a priority call.
4.12 Served user
The user who requests SS-CPI and/or SS-CPIP.
4.13 Time to priority interruption
The duration of the impending priority interruption state.
4.14 Unprotected call
A call which has not been assigned a CPIPL value or has a CPIPL value equal to zero.