ISO/IEC 16353:2011 情報技術—システム間の通信および情報交換— NFC-WI(NFC-FEC)のフロントエンド構成コマンド | ページ 2

※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。

序文

ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである国家機関は、技術活動の特定の分野を扱うために、それぞれの組織によって設立された技術委員会を通じて、国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力しています。 ISO および IEC と連携して、政府および非政府の他の国際機関もこの作業に参加しています。情報技術の分野では、ISO と IEC が合同技術委員会 ISO/IEC JTC 1 を設立しました。

国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.

合同技術委員会の主な任務は、国際規格を作成することです。合同技術委員会によって採択された国際規格草案は、投票のために各国の機関に回覧されます。国際規格として発行するには、投票を行う国の機関の少なくとも 75% による承認が必要です。

このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO および IEC は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。

ISO/IEC 16353 は、Ecma International によって (ECMA-390 として) 作成され、特別な「ファスト トラック手順」の下で、合同技術委員会 ISO/IEC JTC 1, 情報技術によって採用され、国家機関による承認と並行して行われました。 ISOおよびIECの。

序章

ISO/IEC 28361 は、この国際規格がコマンド、応答、およびそれらの送信を定義する 2 線式インターフェイスを指定し、ISO/IEC 28361 で指定されているように、トランシーバとフロントエンドの間で制御および状態情報を交換できるようにします。 RF フィールドの存在の表示と、フロントエンドのデータ レートと通信モードを変更するための制御情報が含まれます。

1 スコープ

この国際規格は、ISO/IEC 28361 で指定された近距離無線通信有線インターフェイス (NFC-WI) のコマンドを指定します。コマンドにより、トランシーバとフロントエンド間の制御および状態情報の交換が可能になります。

3 参考文献

本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。

  • ISO/IEC 28361:2007, 情報技術 — システム間の電気通信および情報交換 — 近距離無線通信有線インターフェイス (NFC-WI)

4 用語と定義

このドキュメントの目的のために、ISO/IEC 28361 に記載されている用語と定義が適用されます。

Foreword

ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.

The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.

ISO/IEC 16353 was prepared by Ecma International (as ECMA-390) and was adopted, under a special “fast-track procedure”, by Joint Technical Committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC.

Introduction

ISO/IEC 28361 specifies a two-wire interface for which this International Standard defines commands, responses and their transmission, allowing the exchange of control and state information between the transceiver and the front-end as specified in ISO/IEC 28361. Such exchange may include indication of the presence of the RF field and control information to change data rates and communication modes of the front-end.

1 Scope

This International Standard specifies commands for the Near Field Communication Wired Interface (NFC-WI) specified in ISO/IEC 28361. The commands allow exchange of control and state information between the transceiver and the front-end.

3 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

  • ISO/IEC 28361:2007, Information technology — Telecommunications and information exchange between systems — Near Field Communication Wired Interface (NFC-WI)

4 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO/IEC 28361 apply.