※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである国家機関は、技術活動の特定の分野を扱うために、それぞれの組織によって設立された技術委員会を通じて、国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力しています。 ISO および IEC と連携して、政府および非政府の他の国際機関もこの作業に参加しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 3.
情報技術の分野では、ISO と IEC は合同技術委員会 ISO/IEC JTC 1 を設立しました。合同技術委員会によって採択された国際規格の草案は、投票のために各国の機関に回覧されます。国際規格として発行するには、投票を行う国の機関の少なくとも 75% による承認が必要です。
この国際規格の一部の要素が特許権の対象となる可能性があることに注意してください。 ISO および IEC は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
この国際規格は、ECMA によって (規格 ECMA-286 として) 作成され、特別な「ファスト トラック手順」の下で、合同技術委員会 ISO/IEC JTC 1, 情報技術によって採用されました。 ISOおよびIE
附属書 A から G は、この規格の規範的な部分を形成します。附属書 H から L は情報提供のみを目的としています。
セクション 1 一般
1 スコープ
この国際規格は、幅 12.7 mm, 208 トラックの磁気テープ カートリッジの物理的および磁気的特性を指定して、ドライブ間でこのようなカートリッジの物理的な互換性を可能にします。また、記録された信号の品質、デジタル リニア テープ 6 (DLT 6) と呼ばれるフォーマット、および記録方法も指定し、ドライブ間のデータ交換を可能にします。磁気テープ ラベル付けの国際規格 ISO 1001 などのラベル付け規格とともに、このような磁気テープ カートリッジによる完全なデータ交換が可能になります。
3 参考文献
次の規範文書には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。日付の記載された参考資料については、これらの刊行物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 1001:1986, 情報処理 — 情報交換のための磁気テープのファイル構造とラベル付け。
- ISO 1302:1992, テクニカル ドローイング — 表面テクスチャの表示方法。
- ISO/IEC 11576:1994, 情報技術 — データの無損失圧縮アルゴリズムの登録手順。
4 用語と定義
この国際規格の目的のために、次の用語と定義が適用されます。
4.1
平均信号振幅
物理記録密度 2,578 ftpmm での読み取りヘッドからの出力信号の平均ピーク ツー ピーク値は、25.4 mm の最小トラック長で測定され、欠落したパルスは除外されます。
4.2
方位角
参照エッジに垂直な線から、トラック上で作成された記録の平均フラックス遷移線の角度偏差 (円弧度)
4.3
裏面
データを記録するために使用される磁気コーティングの反対側のテープの表面。
4.4
テープの開始マーカー
ボット
リーダーに最も近い端に向かってテープの中心線にパンチされた穴。
4.5
ブロック
物理トラックに記録され、1 つの単位と見なされる一連の連続したバイト。
4.6
バイト
単位として作用するビットの順序付けられたセット。
注記 1この国際規格では、すべてのバイトは 8 ビットのバイトである。
4.7
カートリッジ
外端にリーダーが付いた12.7mm幅の磁気テープの供給リールが1つ入ったケースです。
4.8
巡回冗長検査 (CRC) 文字
数学的計算によって生成され、エラー検出に使用される 64 ビット文字。
4.9
早期警戒
東西
記録領域の終わりに近づいていることを示す、ドライブによって生成される信号。
4.10
エラー検出コード
EDC
エラー検出に使用されるチェック バイトを生成する数学的な計算。
4.11
テープの終わりマーカー
EOT
リーダーから最も離れた端に向かってテープの中心線にパンチされた穴.
4.12
実在物
論理ユニットとして扱われ、論理トラックに記録される 20 個のブロックのグループ。ただし、フィラー ブロックがある場合は除きます。
4.13
エラー訂正コード
ECC
CRC および EDC によって検出されたエラーの訂正に使用されるチェック バイトを生成する数学的な計算。
4.14
封筒
エンティティのグループ。
4.15
封筒サイズ
エンベロープ内のエンティティの数。
4.16
磁束遷移位置
テープ面に垂直な自由空間磁束密度が最大になる点。
4.17
磁束遷移間隔
連続する磁束遷移間の磁気テープ上の距離。
4.18
グループレコード
同じサイズの一連のレコードで構成されるレコード。
4.19
論理トラック
同時に書き込みまたは読み取りが行われる 4 つの物理トラックのグループ。
4.20
磁気テープ
コンピュータおよび関連機器での入力、出力、および保存を目的とした磁気信号を受け入れて保持するテープ。
4.21
マスター標準参照テープ
リファレンスフィールド、信号振幅、分解能、ピークシフト、オーバーライト特性のスタンダードとして選ばれたテープ。
注記 1:マスター標準リファレンス テープは、Quantum Corporation によって確立されました。
4.22
オブジェクト
テープ マーク タイプのレコードまたはページ。
4.23
ページ
ブロックの論理的な分割。
4.24
物理記録密度
トラックの単位長さあたりに記録されたフラックス遷移の数。ミリメートルあたりのフラックス遷移数 (ftpmm) で表されます。
4.25
物理トラック
一連の磁気信号を記録できるテープ上の縦方向の領域。
4.26
記録
ユーザー バイトのコレクション。その数はホストによって決定されます。
4.27
基準エッジ
観察者の左に BOT, 右に EOT でテープの磁気コーティングを見たときのテープの下端。
4.28
参照フィールド
マスター標準参照テープの典型的なフィールド。
4.29
二次標準参照テープ
マスター スタンダード リファレンス テープの特性との関連で特性が知られており、記載されているテープ。
原則として、これらの二次標準参照テープは、この国際規格の最初のバージョンの発行から 10 年間利用できます。ただし、ECMA と Quantum Corporation の間の合意により、この期間は、そのようなセカンダリ標準参照テープの需要を考慮して変更される場合があります。
4.30
標準基準振幅
SRA
2 578 ftpmm のテスト録音電流で録音したときのマスター標準リファレンス テープからの平均信号振幅。
4.31
標準基準電流
参照フィールドを生成する電流。
4.32
テスト記録電流
標準基準電流の1.1倍の電流。
4.33
代表的な分野
2 578 ftpmm の物理記録密度での記録フィールドに対する平均信号振幅のプロットでは、最大平均信号振幅の 95% に等しい平均信号振幅を引き起こす最小フィールド。
セクション 2 未記録テープの要件
セクション 3 テープカートリッジの機械的仕様
セクション 4 交換テープの要件
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 3.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
This International Standard was prepared by ECMA (as Standard ECMA-286) and was adopted, under a special"fast-track procedure", by Joint Technical Committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC.
Annexes A to G form a normative part of this International Standard. Annexes H to L are for information only.
Section 1 General
1 Scope
This International Standard specifies the physical and magnetic characteristics of a 12,7 mm wide, 208-track magnetic tape cartridge, to enable physical interchangeability of such cartridges between drives. It also specifies the quality of the recorded signals, a format - called Digital Linear Tape 6 (DLT 6) - and a recording method, thereby allowing data interchange between drives. Together with a labelling standard, for instance International Standard ISO 1001 for Magnetic Tape Labelling, it allows full data interchange by means of such magnetic tape cartridges.
3 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 1001:1986, Information processing — File structure and labelling of magnetic tapes for information interchange.
- ISO 1302:1992, Technical drawings — Method of indicating surface texture.
- ISO/IEC 11576:1994, Information technology — Procedure for the registration of algorithms for the lossless compression of data.
4 Terms and definitions
For the purposes of this International Standard, the following terms and definitions apply.
4.1
Average Signal Amplitude
The average peak-to-peak value of the output signal from the read head at the physical recording density of 2 578 ftpmm measured over a minimum length of track of 25,4 mm, exclusive of missing pulses.
4.2
azimuth
The angular deviation, in degrees of arc, of the mean flux transition line of the recording made on a track from a line normal to the Reference Edge.
4.3
back surface
The surface of the tape opposite the magnetic coating which is used to record data.
4.4
Beginning-Of-Tape marker
BOT
A hole punched on the centreline of the tape towards the end nearest to the leader.
4.5
block
A set of contiguous bytes recorded on a physical track and considered as a unit.
4.6
byte
An ordered set of bits acted upon as a unit.
Note 1 to entry: In this International Standard, all bytes are 8-bit bytes.
4.7
cartridge
A case containing a single supply reel of 12,7 mm wide magnetic tape with a leader attached at the outer end.
4.8
Cyclic Redundancy Check (CRC) character
A 64-bit character, generated by a mathematical computation, used for error detection.
4.9
Early Warning
EW
A signal generated by the drive indicating the approaching end of the recording area.
4.10
Error-Detecting Code
EDC
A mathematical computation yielding check bytes used for error detection.
4.11
End-Of-Tape marker
EOT
A hole punched on the centreline of the tape towards the end farthest from the leader.
4.12
Entity
A group of twenty blocks treated as a logical unit and recorded on a logical track, except Filler Blocks, if any.
4.13
Error-Correcting Code
ECC
A mathematical computation yielding check bytes used for the correction of errors detected by the CRC and the EDC.
4.14
Envelope
A group of Entities.
4.15
Envelope size
The number of Entities in an Envelope.
4.16
flux transition position
The point which exhibits the maximum free-space flux density normal to the tape surface.
4.17
flux transition spacing
The distance on the magnetic tape between successive flux transitions.
4.18
Group Record
A Record consisting of a series of Records of equal size.
4.19
logical track
A group of four physical tracks that are written or read simultaneously.
4.20
magnetic tape
A tape that accepts and retains magnetic signals intended for input, output, and storage purposes on computers and associated equipment.
4.21
Master Standard Reference Tape
A tape selected as the standard for Reference Field, signal amplitude, resolution, peakshift, and overwrite characteristics.
Note 1 to entry: The Master Standard Reference Tape has been established by the Quantum Corporation.
4.22
object
A Record or a page of type Tape Mark.
4.23
page
A logical division of a block.
4.24
physical recording density
The number of recorded flux transitions per unit length of track, expressed in flux transitions per millimetre (ftpmm).
4.25
physical track
A longitudinal area on the tape along which a series of magnetic signals can be recorded.
4.26
Record
A collection of User Bytes, the number of which is determined by the host.
4.27
Reference Edge
The bottom edge of the tape when viewing the magnetic coating of the tape with the BOT to the left and the EOT to the right of the observer.
4.28
Reference Field
The Typical Field of the Master Standard Reference Tape.
4.29
Secondary Standard Reference Tape
A tape the characteristics of which are known and stated in relation to those of the Master Standard Reference Tape.
In principle, these Secondary Standard Reference Tapes will be available for a period of 10 years from the publication of the first version of this International Standard. However, by agreement between ECMA and Quantum Corporation, this period may be changed to take into account the demand for such Secondary Standard Reference Tapes.
4.30
Standard Reference Amplitude
SRA
The Average Signal Amplitude from the Master Standard Reference Tape when it is recorded with the Test Recording Current at 2 578 ftpmm.
4.31
Standard Reference Current
The current that produces the Reference Field.
4.32
Test Recording Current
The current that is 1,1 times the Standard Reference Current.
4.33
Typical Field
In the plot of the Average Signal Amplitude against the recording field at the physical recording density of 2 578 ftpmm, the minimum field that causes an Average Signal Amplitude equal to 95 % of the maximum Average Signal Amplitude.