ISO/IEC 19823-21:2019 情報技術—セキュリティサービス暗号スイートの適合性テスト方法—パート21：暗号スイートSIMON | ページ 2

Foreword

ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.

The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ) or the IEC list of patent declarations received (see http://patents.iec.ch ).

Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .

This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques.

A list of all parts in the ISO/IEC 19823 series can be found on the ISO website.

Introduction

The ISO/IEC 29167 series describes security services as applicable for the ISO/IEC 18000 series. The various parts of ISO/IEC 29167 describe crypto suites that are optional extensions to the ISO/IEC 18000 air interfaces.

The ISO/IEC 19823 series describes the conformance test methods for security service crypto suites. It is related to the ISO/IEC 18047 series, which describes the radio frequency identification device conformance test methods, in the same way as ISO/IEC 29167 is related to ISO/IEC 18000.

These relations mean that, for a product that is claimed to be compliant to a pair of ISO/IEC 18000-n and ISO/IEC 29167-m, the test methods of ISO/IEC 18047-n and ISO/IEC 19823-m apply. If a product supports more than one part of ISO/IEC 18000 or ISO/IEC 29167, all related parts of ISO/IEC 18047 and ISO/IEC 19823 apply.

This document describes the test methods for the SIMON crypto suite as standardized in ISO/IEC 29167-21.

1 Scope

This document describes methods for determining conformance to the security crypto suite defined in ISO/IEC 29167-21.

This document contains conformance tests for all mandatory functions.

The conformance parameters are the following:

• parameters that apply directly affecting system functionality and inter-operability,
• protocol including commands and replies,
• nominal values and tolerances.

Unless otherwise specified, the tests in this document are intended to be applied exclusively to RFID tags and interrogators defined in the ISO/IEC 18000 series using ISO/IEC 29167-21.

2 Normative references

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

3 Terms, definitions, symbols and abbreviated terms

For the purposes of this document, the terms, definitions, symbols and abbreviated terms given in ISO/IEC 19762 and in ISO/IEC 29167-21 apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

Bibliography