この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである国家機関は、技術活動の特定の分野を扱うために、それぞれの組織によって設立された技術委員会を通じて、国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力しています。 ISO および IEC と連携して、政府および非政府の他の国際機関もこの作業に参加しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives or www.iec.ch/members_experts/refdocs を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO および IEC は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受信した特許宣言の ISO リスト ( www.iso.org/patents を参照) または受信した特許宣言の IEC リスト ( http://patents.iec.ch )
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html . IEC については、 www.iec.ch/understanding-standards を参照してください。
この文書は、合同技術委員会 ISO/IEC JTC 1, 情報技術、小委員会 SC 6, 電気通信およびシステム間の情報交換によって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO/IEC 21481:2012) を取り消して置き換えるものです。
従来版からの主な変更点は、モード選択と切り替え機構の仕様改善です。
序章
2002 年、Ecma International は、技術委員会 32 のタスク グループ 19 を結成し、近距離無線通信 (NFC) の信号インターフェイスとプロトコルを指定しました。 NFC デバイスは、13.56 MHz で通信するワイヤレスの密接に結合されたデバイスです。
ISO/IEC 1809, ISO/IEC 14443, および ISO/IEC 15693 はすべて、動作周波数として 13.56 MHz を指定していますが、異なる通信モードを指定しています。これらは、NFC, PCD, PICC, および VCD 通信モードとして定義されています。
このドキュメント (NFCIP-2) は、外部 RF フィールドを検出し、これら 4 つの可能な通信モードから 1 つの通信モードを選択するメカニズムを指定します。さらに、NFCIP-2 では、その後の動作が、選択された通信モードを指定する規格で指定されているとおりである必要があります。
2018 年に、このドキュメントを改訂する作業が開始され、最新のユース ケースに対応するためにモードの選択と切り替えが改善されました。さらに、NFC Forum の要求仕様との調和を図ります。
1 スコープ
このドキュメントは、ISO/IEC 18092, ISO/IEC 14443, または ISO/IEC 15693 シリーズを実装するデバイスに対して、13.56 MHz で進行中の通信を妨げないように設計された、通信モードの選択および切り替えメカニズムを指定します。通信モードは、それぞれの国際規格で指定されており、このドキュメントの範囲外です。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO/IEC 14443-2, 個人識別用のカードおよびセキュリティ デバイス — 非接触近接オブジェクト — 2: 高周波電力と信号インターフェース
- ISO/IEC 14443-3, 個人識別用のカードおよびセキュリティ デバイス — 非接触近接オブジェクト — 3: 初期化と衝突防止
- ISO/IEC 14443-4, 個人識別用のカードおよびセキュリティ デバイス — 非接触近接オブジェクト — 4: 伝送プロトコル
- ISO/IEC 15693-2, 個人識別用のカードおよびセキュリティ デバイス — 非接触周辺オブジェクト — 2: エア インターフェイスと初期化
- ISO/IEC 15693-3, 個人識別用のカードおよびセキュリティ デバイス — 非接触周辺オブジェクト — 3: 衝突防止と伝送プロトコル
- ISO/IEC 18092, 情報技術 — システム間の電気通信および情報交換 — 近距離無線通信 — インターフェイスおよびプロトコル (NFCIP-1)
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
3.1
FC
キャリア周波数
動作領域の周波数
注記 1:fcは、ISO/IEC 14443-2, ISO/IEC 15693-2, および ISO/IEC 18092 で指定されている 13.56 MHz ± 7 kHz でなければならない。
注記 2: 13.56 MHz ± 7 kHz は、参考文献 [2] で ISM アプリケーションに割り当てられた周波数帯域です。
3.2
Hスレッシュホールド
外部 RF フィールドを検出するためのしきい値
[出典: ISO/IEC 18092:2013, 4.6.]
3.3
NFC モード
NFCIP-2 デバイスが NFCIP-1 デバイスとして動作するモード
注記 1: NFC モードは、ISO/IEC 18092 の必須の NFCIP-1 デバイス要件に準拠する必要があります。
3.4
PCD モード
NFCIP-2 デバイスが PCD として動作するモード
注記 1: PCD モードは、ISO/IEC 14443-2, ISO/IEC 14443-3, および ISO/IEC 14443-4 の必須の PCD 要件に準拠する必要があります。
3.5
PICCモード
NFCIP-2 デバイスが PICC として動作するモード
注記 1: PICC モードは、ISO/IEC 14443-2, ISO/IEC 14443-3, および ISO/IEC 14443-4 の必須の PICC 要件に準拠する必要があります。
3.6
VCD モード
NFCIP-2 デバイスが VCD として動作するモード
注記 1: VCD モードは、ISO/IEC 15693-2 および ISO/IEC 15693-3 の必須の VCD 要件に準拠する必要があります。
参考文献
| [1] | NFC フォーラム、デバイス要件、v2.0 以降、 https://nfc-forum.org で入手可能。 |
| [2] | 無線規制条項 ITU-R, 5, 2012 年。 |
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives or www.iec.ch/members_experts/refdocs ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ) or the IEC list of patent declarations received (see http://patents.iec.ch ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html . In the IEC, see www.iec.ch/understanding-standards .
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 6, Telecommunications and information exchange between systems.
This third edition cancels and replaces the second edition (ISO/IEC 21481:2012), which has been technically revised.
The main change compared to the previous edition is the improvement of the specification of the mode selection and switching mechanism.
Introduction
In 2002, Ecma International formed Task Group 19 of Technical Committee 32 to specify near field communication (NFC) signal interfaces and protocols. The NFC devices are wireless, closely-coupled devices communicating at 13,56 MHz.
Although ISO/IEC 18092 (NFCIP-1), ISO/IEC 14443 and ISO/IEC 15693 all specify 13,56 MHz as their working frequency, they specify distinct communication modes. These are defined as NFC, PCD, PICC and VCD communication modes.
This document (NFCIP-2) specifies the mechanism to detect an external RF field and select one communication mode out of those four possible communication modes. Furthermore, NFCIP-2 requires that subsequent behaviour be as specified in the standard specifying the selected communication mode.
In 2018, the work to revise this document started to improve mode selection and switching to address latest use cases. Furthermore, harmonization with NFC Forum requirement specification is intended.
1 Scope
This document specifies the communication mode selection and switching mechanism, designed not to disturb any ongoing communication at 13,56 MHz, for devices implementing ISO/IEC 18092, the ISO/IEC 14443 or ISO/IEC 15693 series. The communication modes are specified in the respective International Standards and are outside of the scope of this document.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO/IEC 14443-2, Cards and security devices for personal identification — Contactless proximity objects — 2: Radio frequency power and signal interface
- ISO/IEC 14443-3, Cards and security devices for personal identification — Contactless proximity objects — 3: Initialization and anticollision
- ISO/IEC 14443-4, Cards and security devices for personal identification — Contactless proximity objects — 4: Transmission protocol
- ISO/IEC 15693-2, Cards and security devices for personal identification — Contactless vicinity objects — 2: Air interface and initialization
- ISO/IEC 15693-3, Cards and security devices for personal identification — Contactless vicinity objects — 3: Anticollision and transmission protocol
- ISO/IEC 18092, Information technology — Telecommunications and information exchange between systems — Near Field Communication — Interface and Protocol (NFCIP-1)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
fc
carrier frequency
frequency of operating field
Note 1 to entry:fc shall be 13,56 MHz ± 7 kHz as specified in ISO/IEC 14443-2, ISO/IEC 15693-2 and ISO/IEC 18092.
Note 2 to entry: 13,56 MHz ± 7 kHz is a frequency band allocated in Reference [2] for ISM applications.
3.2
HTHRESHOLD
threshold value to detect an external RF field
[SOURCE: ISO/IEC 18092:2013, 4.6.]
3.3
NFC mode
mode in which an NFCIP-2 device operates as an NFCIP-1 device
Note 1 to entry: NFC mode shall be compliant with the mandatory NFCIP-1 device requirements of ISO/IEC 18092.
3.4
PCD mode
mode in which an NFCIP-2 device operates as a PCD
Note 1 to entry: PCD mode shall be compliant with the mandatory PCD requirements of ISO/IEC 14443-2, ISO/IEC 14443-3 and ISO/IEC 14443-4.
3.5
PICC mode
mode in which an NFCIP-2 device operates as a PICC
Note 1 to entry: PICC mode shall be compliant with the mandatory PICC requirements of ISO/IEC 14443-2, ISO/IEC 14443-3 and ISO/IEC 14443-4.
3.6
VCD mode
mode in which an NFCIP-2 device operates as a VCD
Note 1 to entry: VCD mode shall be compliant with the mandatory VCD requirements of ISO/IEC 15693-2 and ISO/IEC 15693-3.
Bibliography
| [1] | NFC Forum, Devices Requirements, v2.0 or later, available at https://nfc-forum.org . |
| [2] | Radio Regulations Article ITU-R, 5, 2012. |