この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである各国機関は、特定の技術活動分野に対処するためにそれぞれの組織によって設立された技術委員会を通じて国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力します。政府および非政府の他の国際機関も、ISO および IEC と連携してこの作業に参加しています。情報技術の分野では、ISO と IEC は共同技術委員会 ISO/IEC JTC 1 を設立しました。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
合同技術委員会の主な任務は、国際規格を作成することです。合同技術委員会によって採択された国際規格草案は、投票のために各国機関に配布されます。国際規格として発行するには、投票を行っている国家機関の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO および IEC は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO/IEC 26908 は Ecma International によって (ECMA-369 として) 作成され、ISO の各国機関による承認と並行して、特別な「ファストトラック手順」に基づいて合同技術委員会 ISO/IEC JTC 1 (情報技術)によって採用されました。そしてIE
この第 2 版は、技術的に改訂された第 1 版 (ISO/IEC 26908:2007) を廃止し、置き換えます。
導入
ISO/IEC 26907 は、高速超広帯域無線トランシーバーの PHY および MAC を指定します。
ISO/IEC 26907 の実装では、指定どおりに PHY と MAC 間のインターフェイスが公開される場合があります。
1 スコープ
この国際規格は、ISO/IEC 26907 で指定されているように、PHY と MAC の実装間のインターフェイスを指定します。
3 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO/IEC 26907:2009, 情報技術 - システム間の電気通信と情報交換 - 高速超広帯域 PHY および MAC 標準 (Ecma によって標準 ECMA-368 としても発行)
4 用語と定義
この文書の目的には、ISO/IEC 26907 に記載されている用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 26908 was prepared by Ecma International (as ECMA-369) and was adopted, under a special"fasttrack procedure", by Joint Technical Committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC.
This second edition cancels and replaces the first edition (ISO/IEC 26908:2007), which has been technically revised.
Introduction
ISO/IEC 26907 specifies the PHY and MAC for a high rate ultra wideband wireless transceiver.
Implementations of ISO/IEC 26907 may expose the interface between the PHY and MAC as specified herein.
1 Scope
This International Standard specifies the interface between implementations of the PHY and MAC as specified in ISO/IEC 26907.
3 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO/IEC 26907:2009, Information technology — Telecommunications and information exchange between systems — High-rate ultra-wideband PHY and MAC standard (also published by Ecma as Standard ECMA-368)
4 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/IEC 26907 apply.