※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである国家機関は、技術活動の特定の分野を扱うために、それぞれの組織によって設立された技術委員会を通じて、国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力しています。 ISO および IEC と連携して、政府および非政府の他の国際機関もこの作業に参加しています。情報技術の分野では、ISO と IEC が合同技術委員会 ISO/IEC JTC 1 を設立しました。
この文書の作成に使用された手順と、今後の維持を意図した手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります ( www.iso.org/directives を参照)
IEEE 規格ドキュメントは、IEEE ソサイエティおよび IEEE 規格協会 (IEEE-SA) 規格委員会の規格調整委員会内で作成されます。 IEEE は、米国規格協会によって承認されたコンセンサス開発プロセスを通じて標準を開発します。このプロセスは、さまざまな視点と関心を代表するボランティアを集めて最終製品を完成させます。ボランティアは必ずしも研究所のメンバーではなく、無償で奉仕します。 IEEE はプロセスを管理し、コンセンサス開発プロセスの公平性を促進するためのルールを確立しますが、IEEE はその標準に含まれる情報の正確性を独自に評価、テスト、または検証しません。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO および IEC は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自発的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
ISO/IEC/IEEE 8802-A:2015/Amd.2 は、IEEE Computer Society の LAN/MAN によって (IEEE Std 802c-2017 として) 作成され、その編集規則に従って起草されました。これは、ISO と IEEE の間の Partner Standards Development Organization 協力協定で定義された「ファストトラック手順」の下で、Joint Technical Committee ISO/IEC JTC 1, Information technology , Subcommittee SC6, Telecommunications and information exchange between systems によって採用されました。
ISO/IEC/IEEE 8802 シリーズのすべての部品のリストは、ISO Web サイトにあります。
序章
この概要は、IEEE Std 802c-2017, ローカルおよびメトロポリタン エリア ネットワークの IEEE 標準: 概要とアーキテクチャ - 修正 2: ローカル メディア アクセス制御 (MAC) アドレスの使用の一部ではありません。
IEEE Std 802-2014 に対するこの修正は、構造化ローカル アドレス プラン (SLAP) と呼ばれるオプションのローカル メディア アクセス制御 (MAC) アドレス空間構造を提供し、複数の管理者が共存できるようにします。この構造体は、IEEE Registration Authority (RA) によって割り当てられた Company ID (CID) を使用して、プロトコルのローカル MAC アドレスの範囲を指定します。ローカル MAC アドレスの別の範囲は、管理者が割り当てるように指定されています。この改正では、IEEE 802®プロトコルで使用するローカル MAC アドレスの範囲を推奨しています。また、プロトコル識別子での CID の使用を明確にするなど、軽微なエラー、あいまいさ、省略、および矛盾を修正します。
(この修正は、IEEE Std 802d™-2017 によって修正された IEEE Std 802 ® -2014 に基づいています。)
注- この修正に含まれる編集指示は、ここに含まれる資料を基本文書およびその他の修正にマージして、新しい包括的な規格を形成する方法を定義します。
編集手順は 、太字のイタリック体で 示されています。変更、削除、挿入、置換の 4 つの編集命令が使用されます。 変更 は、既存のテキストまたは表を修正するために使用されます。編集指示では、変更の場所を指定し、取り消し線(古い内容を削除する場合) または下線(新しい内容を追加する場合) を使用して、変更内容を説明します。 削除 は、既存の素材を削除します。 インサート は、既存の材料を乱すことなく新しい材料を追加します。挿入には再番号付けが必要な場合があります。その場合、再番号付けの指示は編集指示で与えられます。 置換 は、既存の資料を削除して新しい資料に置き換えることにより、既存のテキスト、節、表、または図に大幅な変更を加えるために使用されます。編集上の注意事項は、変更が基本規格に組み込まれるため、将来の版には引き継がれません。 1
3. 定義、頭字語、および略語
3.1 定義
次の用語をアルファベット順に 3.1 に挿入します。
ローカル MAC アドレス
ユニバーサルまたはローカル管理 (U/L) ビットが 1 に設定された媒体アクセス制御 (MAC) アドレス。
ネットワーク固有識別子
ヌイ
IEEE 802®ローカル エリア ネットワーク (LAN) 内で一意の識別子。
構造化されたローカル アドレス プラン
平手打ち
拡張ローカル識別子 (ELI)、標準割り当て識別子 (SAI)、および特定のばらばらな範囲での管理割り当て識別子 (AAI) アドレスの使用を伴う、ローカル媒体アクセス制御 (MAC) アドレス空間の使用に関するオプションの標準化された仕様。
3.2 頭字語と略語
示されているように、3.2 の次の略語を変更します。
| CID | Cidc識別子 |
次の略語をアルファベット順に 3.2 に挿入します。
| ああい | 管理者が割り当てた識別子 |
| AAI-48 | 48 ビット AAI |
| AAI-64 | 64 ビット AAI |
| エリ | 拡張ローカル識別子 |
| ELI-48 | 48 ビット ELI |
| ELI-64 | 64 ビット ELI |
| ヌイ | ネットワーク固有識別子 |
| NUI-48 | 48 ビット NUI |
| NUI-64 | 64 ビット NUI |
| サイ | デフォルトで割り当てられた識別子 |
| SAI-48 | 48ビットSAI |
| SAI-64 | 64ビットSAI |
| 平手打ち | 構造化されたローカル アドレス プラン |
基本規格全体の「EUI-48」および「EUI-64」に関連して、用語「拡張一意識別子」の単数形および複数形の両方を大文字の「拡張一意識別子」に変更します。
基本規格全体を通して「OUI」に関連して、「組織固有の識別子」という用語の単数形と複数形の両方を大文字の「組織固有識別子」に変更します。
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted (see www.iso.org/directives ).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
ISO/IEC/IEEE 8802-A:2015/Amd.2 was prepared by the LAN/MAN of the IEEE Computer Society (as IEEE Std 802c-2017) and drafted in accordance with its editorial rules. It was adopted, under the “fast-track procedure” defined in the Partner Standards Development Organization cooperation agreement between ISO and IEEE, by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC6, Telecommunications and information exchange between systems.
A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO website.
Introduction
This introduction is not part of IEEE Std 802c-2017, IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture—Amendment 2: Local Medium Access Control (MAC) Address Usage.
This amendment to IEEE Std 802-2014 provides an optional local medium access control (MAC) address space structure, known as the Structured Local Address Plan (SLAP), to allow multiple administrations to coexist. This structure designates a range of local MAC addresses for protocols using a Company ID (CID) assigned by the IEEE Registration Authority (RA). Another range of local MAC addresses is designated for assignment by administrators. The amendment recommends a range of local MAC addresses for use by IEEE 802® protocols. It also corrects minor errors, ambiguities, omissions, and inconsistencies, including clarifying the use of CID in protocol identifiers.
(This amendment is based on IEEE Std 802®-2014 as amended by IEEE Std 802d™-2017.)
NOTE— The editing instructions contained in this amendment define how to merge the material contained here into the base document and its other amendments to form the new comprehensive standard.
Editing instructions are shown bold italic . Four editing instructions are used: change, delete, insert, and replace. Change is used to make corrections in existing text or tables. The editing instruction specifies the location of the change and describes what is being changed by using either strikethrough (to remove old material) or underscore (to add new material). Delete removes existing material. Insert adds new material without disturbing the existing material. Insertions may require renumbering. If so, renumbering instructions are given in the editing instruction. Replace is used to make large changes in existing text, subclauses, tables, or figures by removing existing material and replacing it with new material. Editorial notes will not be carried over into future editions because the changes will be incorporated into the base standard. 1
3. Definitions, acronyms, and abbreviations
3.1 Definitions
Insert the following terms into 3.1 in alphabetical order:
local MAC address
A medium access control (MAC) address with the universally or locally administered (U/L) bit set to 1.
Network Unique Identifier
NUI
An identifier that is unique within the IEEE 802® local area network (LAN).
Structured Local Address Plan
SLAP
An optional standardized specification for the use of local medium access control (MAC) address space entailing the use of Extended Local Identifier (ELI), Standard Assigned Identifier (SAI), and Administratively Assigned Identifier (AAI) addresses in specific disjoint ranges.
3.2 Acronyms and abbreviations
Change the following abbreviation in 3.2 as indicated:
| CID | Cc ompany ididentifier |
Insert the following abbreviations into 3.2 in alphabetical order:
| AAI | Administratively Assigned Identifier |
| AAI-48 | 48-bit AAI |
| AAI-64 | 64-bit AAI |
| ELI | Extended Local Identifier |
| ELI-48 | 48-bit ELI |
| ELI-64 | 64-bit ELI |
| NUI | Network Unique Identifier |
| NUI-48 | 48-bit NUI |
| NUI-64 | 64-bit NUI |
| SAI | Standard Assigned Identifier |
| SAI-48 | 48-bit SAI |
| SAI-64 | 64-bit SAI |
| SLAP | Structured Local Address Plan |
Relative to “EUI-48” and “EUI-64” throughout the entire base standard, change both singular and plural forms of the term “extended unique identifier” to the capitalized form “Extended Unique Identifier.”
Relative to “OUI” throughout the entire base standard, change both singular and plural forms of the term “organizationally unique identifier” to the capitalized form “Organizationally Unique Identifier”.