※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
例外的な状況で、技術委員会が、国際規格として通常公開されているものとは異なる種類のデータ (たとえば、「最新技術」) を収集した場合、参加メンバーの単純多数決により、次のことを決定することができます。テクニカルレポートを発行します。テクニカル レポートは、本質的に完全に有益であり、提供するデータがもはや有効または有用でないと見なされるまで、レビューする必要はありません。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO/TR 11150 は、技術委員会 ISO/TC 193, 天然ガス、小委員会 SC 1, 天然ガスの分析によって作成されました。
序章
2004 年のプラハ会議での決議 6 により、ISO/TC 193/SC 1, 天然ガスの分析は、炭化水素露点および炭化水素含有量に関するさまざまな国際規格のガイダンスに関するテクニカル レポートを発行することを決定しました。
このテクニカル レポートの主な目的は、炭化水素露点と呼ばれる天然ガスの性質の背後にある複雑な問題を、これらの主題に関するさまざまな国際規格の適用について、より広いガス コミュニティに説明することです。
1 スコープ
このテクニカル レポートでは、天然ガスの炭化水素露点と炭化水素含有量を推定するさまざまな方法について説明します。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 6327, ガス分析 — 天然ガスの水露点の決定 — 冷却表面凝縮湿度計
- ISO 6570:2001, 天然ガス — 潜在的な炭化水素液体含有量の測定 — 重量法
- ISO 697, 天然ガス - ガスクロマトグラフィーによる定義された不確実性を伴う組成の決定
- ISO 7504:2001, ガス分析 - 語彙
- ISO 10715:1997, 天然ガス — サンプリング ガイドライン
- ISO 14532:2001, 天然ガス - 語彙
技術正誤表:2002 - ISO 23874, 天然ガス — 炭化水素露点計算のためのガスクロマトグラフィー要件
参考文献
| [1] | Deaton 、WMおよびFrost 、EM Jr.、圧力下のガスの露点を決定するための装置、鉱山局、 r RI 3399, 1938年5月 |
| [2] | パンネマン、HJ, 炭化水素露点計のトレーサブル校正手順、 2005 年 4 月にシカゴで開催された AGA オペレーション会議でのプレゼンテーション |
| [3] | Ridge , A.,炭化水素露点測定測定システム、Advantica 2002 Conference でのプレゼンテーション |
| [4] | カウパー、CJ, 天然ガス炭化水素露点;測定方法と計算方法の比較、2002 年マーストリヒト、第 2 回ガス分析シンポジウムおよび展示会でのプレゼンテーション |
| [5] | Warner , HR et al.、リーン天然ガスの炭化水素露点測定、Gas Processors Association Annual Convention, 2001 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
In exceptional circumstances, when a technical committee has collected data of a different kind from that which is normally published as an International Standard (“state of the art”, for example), it may decide by a simple majority vote of its participating members to publish a Technical Report. A Technical Report is entirely informative in nature and does not have to be reviewed until the data it provides are considered to be no longer valid or useful.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/TR 11150 was prepared by Technical Committee ISO/TC 193, Natural gas, Subcommittee SC 1, Analysis of natural gas.
Introduction
With Resolution 6 at its Prague meeting in 2004, ISO/TC 193/SC 1, Analysis of natural gas, decided to publish a Technical Report on guidance for various International Standards on hydrocarbon dew point and hydrocarbon content.
The main purpose of this Technical Report is to explain to the wider gas community the complex issues behind the natural gas property called hydrocarbon dew point on the application of various International Standards on these subjects.
1 Scope
This Technical Report describes the various means of estimating hydrocarbon dew point and hydrocarbon content of natural gas.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 6327, Gas analysis — Determination of the water dew point of natural gas — Cooled surface condensation hygrometers
- ISO 6570:2001, Natural gas — Determination of potential hydrocarbon liquid content — Gravimetric methods
- ISO 6974 (all parts), Natural gas — Determination of composition with defined uncertainty by gas chromatography
- ISO 7504:2001, Gas analysis — Vocabulary
- ISO 10715:1997, Natural gas — Sampling guidelines
- ISO 14532:2001, Natural gas — Vocabulary
Technical Corrigendum:2002 - ISO 23874, Natural gas — Gas chromatographic requirements for hydrocarbon dewpoint calculation
Bibliography
| [1] | Deaton, W.M. and Frost, E.M. Jr., Apparatus for determining the dew point of gases under pressure, Bureau of Mines, USBM RI 3399, May 1938 |
| [2] | Panneman, H.J., A traceable calibration procedure for hydrocarbon dew point meters, presentation given at the AGA Operations Conference in Chicago, April 2005 |
| [3] | Ridge, A., Hydrocarbon dew point measurement measuring systems, presentation given at the Advantica 2002 Conference |
| [4] | Cowper, C.J., Natural gas hydrocarbon dew point; comparison of measurement and calculation methods, presentation given at 2nd Gas Analysis Symposium and Exhibition, Maastricht, 2002 |
| [5] | Warner, H.R. et al., Hydrocarbon dew point determination of lean natural gases, Gas Processors Association Annual Convention, 2001 |