この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会の主な任務は、国際規格を作成することですが、例外的な状況では、技術委員会は、次のいずれかのタイプの技術レポートの発行を提案する場合があります。
- タイプ 1: 国際規格の発行に必要なサポートが得られない場合、何度も努力したにもかかわらず、
- タイプ 2, 主題がまだ技術開発中である場合、またはその他の理由により、国際規格に関する合意の可能性はあるが、すぐには実現できない場合。
- タイプ 3 は、技術委員会が、国際規格として通常公開されているものとは異なる種類のデータを収集した場合 (たとえば、「最新技術」)
タイプ 1 およびタイプ 2 のテクニカル レポートは、発行から 3 年以内に審査され、国際規格に変換できるかどうかが決定されます。タイプ 3 のテクニカル レポートは、それらが提供するデータがもはや有効または有用でないと見なされるまで、必ずしもレビューする必要はありません。
タイプ 3 の技術報告書である ISO/TR 11328 は、技術委員会 ISO/TC 113, 水力測定、小委員会 SC 5, 流量測定機器および装置によって作成されました。
1 スコープ
このテクニカル レポートでは、氷の状態で河川や水路の水量を測定するために使用される機器について説明します。さまざまな国際規格で扱われている測定および計算の技法を指定するものではありません。 ISO 9196 は特に氷下の流れの測定方法を扱っており、このテクニカル レポートは ISO 9196 と共に使用することを意図しています。
氷の条件下での流れを決定するための最も一般的な手法は、速度面積法を修正した形式を使用します。このテクニカル レポートでは、氷床を通り抜けて面積、速度、および氷下の流速を決定するためのその他の情報を取得するために必要な特殊な機器に焦点を当てています。
2 参考文献
- ISO 748:1979, 開水路での液体流量測定 — 速度面積法。
- ISO 772:1988, 開水路での液体流量測定 - 語彙と記号。
- ISO 1100/1:1981, 開水路での液体流量測定 — 1: 測量所の設置と運営。
- ISO 1100/2:1982, 開水路での液体流量測定 — 2: ステージ放電関係の決定。
- ISO 2537:1988, 開水路での液体流量測定 - カップ型およびプロペラ型の電流計。
- ISO 3454:1983, 開水路での液体の流れの測定 — 直接深度測深および吊り下げ装置。
- ISO 3455:1976, オープン チャネルでの液体フロー測定 — ストレート オープン タンク内の回転素子電流計のキャリブレーション。
- ISO 9196:1992, 開水路での液体流量測定 — 氷条件下での液体流量測定。
- ISO 9555-1:— 1) 、開放チャネル内の液体の流れの測定 — 安定した流れの測定のためのトレーサー希釈法 — 1: 一般。
- ISO 9555-2:1992, 開路における液体の流れの測定 — 定常流の測定のためのトレーサー希釈法 — 2: 放射性トレーサー。
- ISO 9555-3:1992, 開路における液体の流れの測定 — 定常流の測定のためのトレーサー希釈法 — 3: 化学トレーサー。
- ISO 9555-4:1992, 開路における液体の流れの測定 — 定常流の測定のためのトレーサー希釈法 — 4: 蛍光トレーサー。
3 つの定義
このテクニカル レポートの目的のために、ISO 772 で与えられた定義と次の定義が適用されます。
3.1
アンカーアイス
川の底に付着した海綿状またはスラッシュ氷の蓄積。
3.2
フラジルアイス
乱流水の過冷却によって形成される、水中に浮遊する氷の細かい骨片またはプレート。
3.3
スラッシュアイス
底から解放されたゆるく詰まった錨氷の塊、または氷の覆いの下に浮いているか蓄積した氷塊。
3.4
表面の氷
湖や川の表面に形成された氷床。氷床または氷床とも呼ばれます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The main task of technical committees is to prepare International Standards, but in exceptional circumstances a technical committee may propose the publication of a Technical Report of one of the following types:
- type 1, when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts;
- type 2, when the subject is still under technical development or where for any other reason there is the future but not immediate possibility of an agreement on an International Standard;
- type 3, when a technical committee has collected data of a different kind from that which is normally published as an International Standard ("state of the art", for example).
Technical Reports of types 1 and 2 are subject to review within three years of publication, to decide whether they can be transformed into International Standards. Technical Reports of type 3 do not necessarily have to be reviewed until the data they provide are considered to be no longer valid or useful.
ISO/TR 11328, which is a Technical Report of type 3, was prepared by Technical Committee ISO/TC 113, Hydrometric determinations, Subcommittee SC 5, Flow measuring instruments and equipment.
1 Scope
This Technical Report deals with equipment used to measure water discharge in rivers and channels under ice conditions. It does not specify techniques for measurement and computation which are dealt with in various International Standards. ISO 9196 specifically deals with the methods for the measurement of flow under ice and this Technical Report is intended to be used with ISO 9196.
The most common technique for determining flow under ice conditions uses a modified form of the velocity-area method. This Technical Report concentrates on the specialized equipment required for gaining access through the ice sheet and obtaining area, velocity, and other information for determining the rate of flow under ice.
2 References
- ISO 748:1979, Liquid flow measurement in open channels — Velocity area methods.
- ISO 772:1988, Liquid flow measurement in open channels — Vocabulary and symbols.
- ISO 1100/1:1981, Liquid flow measurement in open channels — 1: Establishment and operation of a gauging station.
- ISO 1100/2:1982, Liquid flow measurement in open channels — 2: Determination of the stage-discharge relation.
- ISO 2537:1988, Liquid flow measurement in open channels — Cup-type and propeller-type current meters.
- ISO 3454:1983, Liquid flow measurement in open channels — Direct depth sounding and suspension equipment.
- ISO 3455:1976, Liquid flow measurement in open channels — Calibration of rotating-element current-meters in straight open tanks.
- ISO 9196:1992, Liquid flow measurement in open channels — Liquid flow measurements under ice conditions.
- ISO 9555-1:— 1) , Measurement of liquid flow in open channels — Tracer dilution methods for the measurement of steady flow — 1: General.
- ISO 9555-2:1992, Measurement of liquid flow in open channels — Tracer dilution methods for the measurement of steady flow — 2: Radioactive tracers.
- ISO 9555-3:1992, Measurement of liquid flow in open channels — Tracer dilution methods for the measurement of steady flow — 3: Chemical tracers.
- ISO 9555-4:1992, Measurement of liquid flow in open channels — Tracer dilution methods for the measurement of steady flow — 4: Fluorescent tracers.
3 Definitions
For the purposes of this Technical Report, the definitions given in ISO 772 and the following definitions apply.
3.1
anchor ice
An accumulation of spongy or slush ice adhering to the bottom of a stream.
3.2
frazil ice
Fine spicules or plates of ice suspended in water that are formed by supercooling of turbulent water.
3.3
slush ice
A mass of loosely packed anchor ice that has released from the bottom, or frazil ice that floats or accumulates under an ice cover.
3.4
surface ice
An ice sheet formed on the surface of a lake or river--also known as ice cover or ice sheet.