※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会の主な任務は、国際規格を作成することですが、例外的な状況では、技術委員会は、次のいずれかのタイプの技術レポートの発行を提案する場合があります。
- タイプ 1: 国際規格の発行に必要なサポートが得られない場合、何度も努力したにもかかわらず、
- タイプ 2, 主題がまだ技術開発中である場合、またはその他の理由により、国際規格に関する合意の可能性はあるが、すぐには実現できない場合。
- タイプ 3 は、技術委員会が、国際規格として通常公開されているものとは異なる種類のデータを収集した場合 (たとえば、「最新技術」)
タイプ 1 およびタイプ 2 のテクニカル レポートは、発行から 3 年以内に審査され、国際規格に変換できるかどうかが決定されます。タイプ 3 のテクニカル レポートは、それらが提供するデータがもはや有効または有用でないと見なされるまで、必ずしもレビューする必要はありません。
タイプ 3 のテクニカル レポートである ISO/TR 11762 は、技術委員会 ISO/TC 52, 軽量金属容器によって作成されました。参考までに、ISO 10654 で標準化されている缶サイズのリストを、構造タイプ別に分類しています。
注 — ISO 10654 は公称充填量のみを指定しています。
1 スコープ
このテクニカル レポートでは、構造タイプ別に提示された丸型オープン トップ缶の公称充填量のリストを示します。
このテクニカル レポートは、次のコンテナに関するものです。
- ストレート缶 ;
- 缶詰のシングルネック。
- 複数のネックイン缶。
2 参考文献
- ISO 90-1軽量金属容器 — 寸法と容量の定義と決定方法 — 1: オープントップ缶。
- ISO 10654軽量金属容器 — 丸型オープントップ缶 — 公称充填量によって定義される缶 — ガスを加えた液体製品用の缶。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The main task of technical committees is to prepare International Standards, but in exceptional circumstances a technical committee may propose the publication of a Technical Report of one of the following types:
- type 1, when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts;
- type 2, when the subject is still under technical development or where for any other reason there is the future but not immediate possibility of an agreement on an International Standard;
- type 3, when a technical committee has collected data of a different kind from that which is normally published as anInternational Standard ("state of the art", for example).
Technical Reports of types 1 and 2 are subject to review within three years of publication, to decide whether they can be transformed into International Standards. Technical Reports of type 3 do not necessarily have to be reviewed until the data they provide are considered to be no longer valid or useful.
ISO/TR 11762, which is a Technical Report of type 3, was prepared by Technical Committee ISO/TC 52, Light gauge metal containers. It gives, for information, a list of can sizes standardized in ISO 10654 but classified by construction type.
NOTE — ISO 10654 specifies only nominal filling volumes.
1 Scope
This Technical Report gives a list of nominal filling volumes for round open top cans presented by construction type.
This Technical Report concerns the following containers:
- straight-sided cans ;
- single necked-in cans ;
- multiple necked-in cans.
2 References
- ISO 90-1Light gauge metal containers — Definitions and determination methods for dimensions and capacities — 1: Open-top cans.
- ISO 10654Light gauge metal containers — Round open-top cans — Cans defined by their nominal filling volumes — Cans for liquid products with added gas.