※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www を参照してください。 .iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 58, ガスシリンダー、サブ委員会 SC 3, シリンダー設計によって作成されました。
ISO 13086 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
1 スコープ
この文書では、複合シリンダーで使用される構造強化繊維の繰返し疲労、およびこれらのシリンダーの構造ライナーおよび非構造ライナーの繰返し疲労について説明します。このドキュメントでは、これらのトピックについての基本的なレベルの理解を提供します。
2 規範的参照
この文書には規範的な参照はありません。
3 用語と定義
この文書には用語や定義は記載されていません。
注ガスシリンダーに関連する用語と定義は ISO 10286 に記載されています。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
参考文献
| 1 | ISO 10286, ガスシリンダー - 用語 |
| 2 | Newhouse Norman L.、「多層直交異方性シリンダーの機械的および過渡湿熱負荷」、博士論文、ネブラスカ大学リンカーン校、1984 年 1 月 |
| 3 | Kinna Marlin A.、「NOL Ring Test Methods」、NOLTR 64-15, 米国海軍兵器研究所、メリーランド州ホワイトオーク、1964 年 9 月 9 日 |
| 4 | ASTM D2291/D2291M-16, ガラス樹脂複合材料のリング試験片の製造に関する標準慣行 |
| 5 | Mandell JF, 「繊維樹脂複合材料の疲労挙動」、MIT-RR-R81-2, マサチューセッツ工科大学、1981 年 4 月 |
| 6 | Liber T.、Daniel IM, 「円筒状試験片形状におけるハイブリッド複合材料の評価」、NASA CR-145006 |
| 7 | ISO/TR 13086-3, ガスシリンダー — 複合シリンダーの設計に関するガイダンス — Part 3: 応力比の計算 |
| 8 | MIL-HDBK-5J, 航空宇宙車両構造用の金属材料および要素、米国国防総省ハンドブック、2003 年 1 月 31 日 |
| 9 | マンソン SS, 「疲労: 複雑な主題 - いくつかの単純な近似」、NASA TM X-52084, 1965 年 |
| 10 | ISO/TR 13086-1, ガスシリンダー — 複合シリンダーの設計に関するガイダンス — Part 1: 試験圧力に関連する繊維の応力破断および破裂率 |
| 11 | ASTM E1049-8, 疲労解析におけるサイクルカウントの標準プラクティス |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 58, Gas cylinders, Subcommittee SC 3, Cylinder design.
A list of all parts in the ISO 13086 series can be found on the ISO website.
1 Scope
This document addresses the topic of cyclic fatigue of structural reinforcing fibres as used in composite cylinders, and cyclic fatigue of structural and non-structural liners in these cylinders. This document provides a basic level of understanding of these topics.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
NOTE Terms and definitions related to gas cylinders can be found in ISO 10286.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| 1 | ISO 10286, Gas cylinders — Terminology |
| 2 | Newhouse Norman L., Mechanical and Transient Hygrothermal Loading of Multilayer Orthotropic Cylinders", Ph.D. Dissertation, University of Nebraska-Lincoln, January 1984 |
| 3 | Kinna Marlin A., “NOL Ring Test Methods”, NOLTR 64-156 (AD 449719), United States Naval Ordnance Laboratory, White Oak, Maryland, 9 September 1964 |
| 4 | ASTM D2291/D2291M-16, Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites |
| 5 | Mandell J.F., “Fatigue Behavior of Fiber-Resin composites,” MIT-RR-R81-2, Massachusetts Institute of Technology, April 1981 |
| 6 | Liber T., Daniel I. M., “Evaluation of Hybrid Composite Materials in Cylindrical Specimen Geometries,” NASA CR-145006 |
| 7 | ISO/TR 13086-3, Gas cylinders — Guidance for design of composite cylinders — Part 3: Calculation of stress ratios |
| 8 | MIL-HDBK-5J, Metallic Materials and Elements for Aerospace Vehicle Structures, US Department of Defense Handbook, 31 January 2003 |
| 9 | Manson S.S., “Fatigue: A Complex Subject — Some Simple Approximations”, NASA TM X-52084, 1965 |
| 10 | ISO/TR 13086-1, Gas cylinders — Guidance for design of composite cylinders — Part 1: Stress rupture of fibres and burst ratios related to test pressure |
| 11 | ASTM E1049-85 (2017), Standard Practices for Cycle Counting in Fatigue Analysis |