※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
例外的な状況で、技術委員会が、国際規格として通常公開されているものとは異なる種類のデータ (たとえば、「最新技術」) を収集した場合、参加メンバーの単純多数決により、次のことを決定することができます。テクニカルレポートを発行します。テクニカル レポートは、本質的に完全に有益であり、提供するデータがもはや有効または有用でないと見なされるまで、レビューする必要はありません。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO/TR 16224 は、技術委員会 ISO/TC 2, Fasteners 、小委員会 SC 12, Fasteners with metric internal threadによって作成されました。
1 スコープ
このテクニカル レポートは、ISO 898-2 で指定されたナットの設計基準に関する情報を提供し、静的引張過負荷下でストリッピング破壊モードが防止されるようにします。
設計基準は、標準化されていないナットや、ボルトと嵌合する ISO メートルねじ (ISO 68-1 に準拠) を備えた内ねじ要素にも適用されます。ただし、二面幅やナットの剛性に関連するその他の機能などの寸法要因、およびねじ山公差は、個々のボルトおよびナット アセンブリの負荷能力に影響を与える可能性があります。したがって、検証試験を実施することを意図している。
注「ボルト」および「ナット」という用語は、それぞれ雄ねじおよび雌ねじの締結具の一般的な用語として使用されます。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
参考文献
| [1] | ISO 4033, 六角ナット、スタイル 2 — 製品グレード A および B |
| [2] | ISO 4034, 六角ナット — 製品グレード C |
| [3] | ISO 8673, 六角ナット、スタイル 1, メートル細目ねじ付き — 製品グレード A および B |
| [4] | ISO 8674, 六角ナット、スタイル 2, メートル細目ねじ付き — 製品グレード A および B |
| [5] | アレクサンダー、スレッドアセンブリのEM分析と設計。 1977 SAE トランザクション、論文番号。 770420 |
| [6] | 大 くばやし たか、萩原正、浜田正と広岡、Y引張特性に対するボルトの自由ねじ部分の影響。 2006 日本機械学会論文集, 72 , no. 718C, pp.1982-1986 |
| [7] | VDI 2230 シート 1, 高負荷ボルト締結ジョイントの系統的計算 — 1 つの円筒形ボルトを使用するジョイント |
| [8] | Hagiwara M, O kubo H, およびNakamura H ボルト-ナット アセンブリの負荷能力 — ナット仕様が破損モードと破損荷重に及ぼす影響。精密工学会誌, 67 (12), 2001, pp. 1945-1949 |
| [9] | Hagiwara , M. and H. Sakai . ISO 898-2 および ISO 898-6 の改訂に向けたボルト/ナット アセンブリのナットに関する設計コンセプトの検証。 Journal of Advanced Mechanical Design, Systems, and Manufacturing 、 , 2007 年、pp. 755-762 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
In exceptional circumstances, when a technical committee has collected data of a different kind from that which is normally published as an International Standard (“state of the art”, for example), it may decide by a simple majority vote of its participating members to publish a Technical Report. A Technical Report is entirely informative in nature and does not have to be reviewed until the data it provides are considered to be no longer valid or useful.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/TR 16224 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 12, Fasteners with metric internal thread.
1 Scope
This Technical Report gives information concerning the design criteria for nuts specified in ISO 898-2 so that, under static tensile overload, the stripping fracture mode is prevented.
The design criteria are also applicable to non-standardized nuts or internally threaded elements with ISO metric screw threads (in accordance with ISO 68-1) mating with bolts. However, dimensional factors such as the width across flats or other features related to rigidity of nuts, and thread tolerances can affect the loadability of the individual bolt and nut assemblies. Therefore, it is intended that verification tests be carried out.
NOTE The terms “bolt” and “nut” are used as the general terms for externally and internally threaded fasteners, respectively.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 68-1, ISO general purpose screw threads — Basic profile — 1: Metric screw threads
- ISO 724, ISO general-purpose metric screw threads — Basic dimensions
- ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel — 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
- ISO 898-2, Mechanical properties of fasteners made of carbon steel and alloy steel — 2: Nuts with specified property classes — Coarse thread and fine pitch thread
- ISO 18265, Metallic materials — Conversion of hardness values
Bibliography
| [1] | ISO 4033, Hexagon nuts, style 2 — Product grades A and B |
| [2] | ISO 4034, Hexagon nuts — Product grade C |
| [3] | ISO 8673, Hexagon nuts, style 1, with metric fine pitch thread — Product grades A and B |
| [4] | ISO 8674, Hexagon nuts, style 2, with metric fine pitch thread — Product grades A and B |
| [5] | Alexander, E.M. Analysis and Design of Threaded Assemblies. 1977 SAE Transactions, Paper No. 770420 |
| [6] | Okubayashi, T., Hagiwara, M., Hamada, M. and Hirooka, Y. Effect of Free-threaded Portion of a Bolt on its Tensile Properties. 2006 Transactions of the Japan Society of Mechanical Engineers, 72 , No. 718C, pp. 1982-1986 |
| [7] | VDI 2230 Blatt 1, Systematic calculation of high duty bolted joints — Joints with one cylindrical bolt |
| [8] | Hagiwara, M., Okubo, H. and Nakamura, H. Loadability of Bolt-Nut Assemblies — Effect of Nut Specifications on the Failure Modes and Failure Load. Journal of the Japan Society for Precision Engineering, 67 (12), 2001, pp. 1945-1949 |
| [9] | Hagiwara, M. and H. Sakai. Verification of the Design Concept on Nuts in Bolt/Nut Assembly for the Revision of ISO 898-2 and ISO 898-6. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 1 (5), 2007, pp. 755-762 |