※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持を意図した手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語と表現の意味に関する説明、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、次の URL を参照してください: www.iso .org/iso/foreword.html .
この文書を担当する委員会は、ISO/TC 205, 建築環境設計です。
序章
世界のエネルギー資源はかなりの割合で消費されており、その結果、知られている化石燃料資源は次の 100 年以内に枯渇することになります。化石燃料の燃焼は、大気中の温室効果ガスの蓄積に寄与しており、その結果、目に見える気候変動が生じています。気候変動の悪影響は文書化されています。エネルギーを保存することが不可欠です。エネルギーを使用する建築産業は、化石燃料の全使用量の 30% から 35% を占めています。建物のエネルギーを節約すると、化石燃料の使用が遅くなり、結果として温室効果ガスが蓄積する可能性があります。
HVAC システムのコンポーネントのエネルギー効率は、建物全体のエネルギー性能を決定する際の重要な要素です。このため、暖房、冷房、給湯設備の効率を把握するための共通試験方法を定め、省エネルギー化を図る必要があります。暖房、冷房、および給湯装置は、通常、装置が満たさなければならない効率の尺度と、その効率の尺度を決定するために使用する必要がある試験方法の両方を指定することによって規制されます。建物のエネルギー性能を適切に評価するには、製品のエネルギー効率に関する試験手順と世界的に関連する基準を含む技術レポートが必要です。このテクニカル レポートは、ISO/TC 205 および ISO/TC 163-ISO/TC 205 によって開発された規格の参考資料として役立ちます。 ISOの。
このテクニカル レポートには、世界中の既存の HVAC 機器のテストおよび評価手順がリストされています。規格は、規格作成組織によるものと、規格で扱われている機器のタイプによるものの 2 つの方法でリストされています。箇条 2 では、手順は手順を開発した組織によってリストされています。箇条 4 では、手順は、手順の対象となる機器のタイプ別にリストされています。手順は、グローバルに採用される可能性のある新しい ISO 手順の開発を支援するためにリストされています。
1 スコープ
このテクニカル レポートには、暖房、換気、および空調機器のエネルギー効率を判断するためのテストおよび評価手順が記載されています。このテクニカル レポートは、空調および給湯装置に適用されます。テストと評価の手順は、2 つの方法でリストされています。
3 用語と定義
na
参考文献
| [1] | ISO 10241-1:2011, 標準の用語エントリ — 1: 一般要件と表示例 |
| [2] | ISO 10241-2:2012, 標準の用語エントリ — 2: 標準化された用語エントリの採用 |
| [3] | ISO 16818, 建築環境設計 - エネルギー効率 - 用語 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
The committee responsible for this document is ISO/TC 205, Building environment design.
Introduction
The world’s energy resources are being consumed at a significant rate that will result in the depletion of known fossil fuel resources within the next century. Combustion of fossil fuels has contributed to the build-up of greenhouse gases in the atmosphere resulting in discernible climate change. The ill effects of climate change have been documented. It is imperative that energy be conserved. The building industry, through its use of energy, accounts for 30 % to 35 % of all fossil fuel usage. Conservation of energy in buildings can result in a slowing down of fossil fuel usage and consequently the build-up of greenhouse gases.
The energy efficiencies of components in HVAC systems are critical factors when determining building overall energy performance. Therefore, it is necessary to define common test methods that are to be used to determine efficiency for space heating, space cooling, and water heating equipment, in order to improve energy conservation. Space heating, space cooling, and water heating equipment are typically regulated by specifying both a measure of efficiency that the equipment must meet and a test method that must be used to determine that measure of efficiency. A technical report containing test procedures and globally relevant standards for the energy-efficiency of products is needed for the proper assessment of building energy performance. This Technical Report will be a useful reference for standards developed by ISO/TC 205 and ISO/TC 163-ISO/TC 205. The ultimate goal of this effort is to develop a set of globally adopted HVAC equipment testing and rating standards under the auspices of ISO.
This Technical Report lists existing HVAC equipment testing and rating procedures from around the world. Standards are listed in two ways, by the standards writing organization and by the type of equipment addressed in the standard. In Clause 2, procedures are listed by the organization that developed the procedure. In Clause 4, procedures are listed by the types of equipment that are covered by the procedure. Procedures are listed to aid in the development of new ISO procedures that may be globally adopted.
1 Scope
This Technical Report lists testing and rating procedures for determining energy efficiency of heating, ventilating, and air conditioning equipment. This Technical Report is applicable to space conditioning and water heating equipment. Testing and rating procedures are listed in two ways.
3 Terms and definitions
na
Bibliography
| [1] | ISO 10241-1:2011, Terminological entries in standards — 1: General requirements and examples of presentation |
| [2] | ISO 10241-2:2012, Terminological entries in standards — 2: Adoption of standardized terminological entries |
| [3] | ISO 16818, Building environment design — Energy efficiency — Terminology |