※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
適合性評価に関連する ISO 固有の用語や表現の意味の説明、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、次の URL を参照してください。 www.iso .org/iso/foreword.html
この文書を担当する委員会は、ISO/TC 17, 「鋼」 、小委員会 SC 1, 「化学組成の決定方法」です。
1 スコープ
この文書では、化学分析法を使用した標準化作業内で実行される精密試験の再現性と再現性を判断する方法について説明します。具体的には、本書では、ISO 5725-3:1994 の精度試験データ、ISO 9647:1989 の精度試験の表 D.2 を例に、精度の計算手順を説明します。
精度を決定するための国際試験の手順は ISO 5725-2 および ISO 5725-3 に記載されています。
2 規範的参照
この文書には規範的な参照はありません。
3 用語と定義
この文書には用語や定義は記載されていません。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
参考文献
| 1 | ISO 572, 測定方法と結果の精度 (真性と精度) |
| 2 | ISO 5725-2:1994, 測定方法と結果の精度 (真性と精度) - Part 2: 標準測定方法の再現性と再現性を決定するための基本方法 |
| 3 | ISO 5725-3:1994, 測定方法と結果の精度 (真性と精度) — Part 3: 標準測定方法の精度の中間尺度 |
| 4 | ISO 9647:1989, 鋼および鉄 — バナジウム含有量の測定 — フレーム原子吸光分析法 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
The committee responsible for this document is ISO/TC 17, Steel, Subcommittee SC 1, Methods of determination of chemical composition.
1 Scope
This document describes how to determine the repeatability and reproducibility of precision tests performed within standardization work using the chemical analysis method. Specifically, this document explains the procedure for calculating precision, using precision test data of ISO 5725-3:1994, Table D.2 for the precision test in ISO 9647:1989 as an example.
The procedure of the international test for determining precision is described in ISO 5725-2 and ISO 5725-3.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| 1 | ISO 5725 (all parts), Accuracy (trueness and precision) of measurement methods and results |
| 2 | ISO 5725-2:1994, Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| 3 | ISO 5725-3:1994, Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| 4 | ISO 9647:1989, Steel and iron — Determination of vanadium content — Flame atomic absorption spectrometric method |