※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 172, 光学およびフォトニクス、小委員会 SC 7, 眼科光学および機器によって作成されました。
1 スコープ
このドキュメントでは、プラスチック眼鏡レンズの耐スクラッチ性と耐摩耗性に関する標準化作業で考慮される、最も一般的に使用される試験方法と、それらの技術的能力および制限について説明します。これには、ISO 8980-5 の基本的な耐摩耗性に関する主張を評価するための ISO 試験方法が含まれています。
このドキュメントは、眼鏡レンズの耐スクラッチ性と耐摩耗性に関する ISO 標準化への将来の関心に役立つことを意図しています。
2 参考文献
このドキュメントには規範的な参照はありません。
3 用語と定義
このドキュメントには、用語と定義は記載されていません。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
参考文献
| [1] | ISO 8980-5:2005, Ophthalmic optics — アンカット仕上げの眼鏡レンズ — 5: 耐摩耗性を主張する眼鏡レンズ表面の最小要件 |
| [2] | ASTM D 7027:2014, 計装スクラッチ マシンを使用したポリマー コーティングおよびプラスチックの耐スクラッチ性評価の標準試験方法 |
| [3] | ISO 9211-4:2012, 光学およびフォトニクス — 光学コーティング — 4: 具体的な試験方法 |
| [4] | ASTM D1003:2013, 透明プラスチックのヘイズと視感透過率の標準試験方法 |
| [5] | ASTM D1044:2013, 透明プラスチックの表面摩耗に対する耐性の標準試験方法 |
| [6] | ISO 19252:2008, プラスチック — スクラッチ特性の決定 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 172, Optics and photonics, Subcommittee SC 7, Ophthalmic optics and instruments.
1 Scope
This document describes the most commonly used test methods considered in standardization work relating to scratch and abrasion resistance of plastic spectacle lenses along with their technical capacities and limitations. It includes the ISO test method for assessment of claims for basic abrasion resistance in ISO 8980-5.
This document is intended to be of benefit to any future interest in ISO standardization on scratch and abrasion resistance of spectacle lenses.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| [1] | ISO 8980-5:2005, Ophthalmic optics — Uncut finished spectacle lenses — 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant |
| [2] | ASTM D 7027:2014, Standard test method for evaluation of scratch resistance of polymeric coatings and plastics using an instrumented scratch machine |
| [3] | ISO 9211-4:2012, Optics and photonics — Optical coatings — 4: Specific test methods |
| [4] | ASTM D1003:2013, Standard test method for haze and luminous transmittance of transparent plastics |
| [5] | ASTM D1044:2013, Standard test method for resistance of transparent plastics to surface abrasion |
| [6] | ISO 19252:2008, Plastics — Determination of scratch properties |