ISO/TS 13399-301:2013 切削工具のデータ表現と交換—パート301：ISO / TS 13399-3に準拠したプロパティに基づく3Dモデルの設計の概念：ねじ山切断タップ、ねじ山形成タップ、およびねじ山切断ダイのモデリング | ページ 2

Foreword

IISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patents

Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.

For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information

The committee responsible for this document is ISO/TC 29, Small tools.

ISO/TS 13399 consists of the following parts, under the general title Cutting tool data representation and exchange:

• Part 1: Overview, fundamental principles and general information model
• Part 2: Reference dictionary for the cutting items [Technical Specification]
• Part 3: Reference dictionary for tool items [Technical Specification]
• Part 4: Reference dictionary for adaptive items [Technical Specification]
• Part 5: Reference dictionary for assembly items [Technical Specification]
• Part 50: Reference dictionary for reference systems and common concepts [Technical Specification]
• Part 60: Reference dictionary for connection systems [Technical Specification]
• Part 100: Definitions, principles and methods for reference dictionaries [Technical Specification]
• Part 150: Usage guidelines [Technical Specification]
• Part 301: Concept for the design of 3D models based on properties according toISO/TS 13399‑3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies [Technical Specification]
• Part 302: Concept for the design of 3D models based on properties according toISO/TS 13399‑3: Modelling of solid drills and countersinking tools [Technical Specification]
• The following parts are under preparation:
• Part 51: Designation system for customer solution cutting tools [Technical Specification]
• Part 80: Concept for the design of 3D models based on properties according toISO/TS 13399: Overview and principles [Technical Specification]
• Part 201: Concept for the design of 3D models based on properties according toISO/TS 13399‑2: Modelling of regular inserts [Technical Specification]
• Part 202: Concept for the design of 3D models based on properties according toISO/TS 13399‑2: Modelling of irregular inserts [Technical Specification]
• Part 203: Concept for the design of 3D models based on properties according toISO/TS 13399‑2: Modelling of exchangeable inserts for drilling [Technical Specification]
• Part 204: Concept for the design of 3D models based on properties according toISO/TS 13399‑2: Modelling of inserts for reaming [Technical Specification]
• Part 303: Concept for the design of 3D models based on properties according to ISO/TS 13399‑3: Modelling of end mills with solid cutting edges [Technical Specification]
• Part 304: Concept for the design of 3D models based on properties according toISO/TS 13399‑3: Modelling of milling cutters with arbor hole and solid cutting edges [Technical Specification]
• Part 307: Concept for the design of 3D models based on properties according toISO/TS 13399‑3: Modelling of end mills for indexable inserts [Technical Specification]
• Part 308: Concept for the design of 3D models based on properties according toISO/TS 13399‑3: Modelling of milling cutters with arbor hole for indexable inserts [Technical Specification]
• Part 309: Concept for the design of 3D models based on properties according toISO/TS 13399‑3: Modelling of tool holders for indexable inserts [Technical Specification]
• Part 311: Concept for the design of 3D models based on properties according toISO/TS 13399‑3: Modelling of solid reamers [Technical Specification]
• Part 312: Concept for the design of 3D models based on properties according toISO/TS 13399‑3: Modelling of reamers for indexable inserts [Technical Specification]
• Part 401: Concept for the design of 3D models based on properties according toISO/TS 13399‑4: Modelling of converting, extending and reducing adaptive items [Technical Specification]
• Part 405: Concept for the design of 3D models based on properties according toISO/TS 13399‑4: Modelling of collets [Technical Specification]

Introduction

This part of ISO 13399 defines the concept, terms and definitions for designing simplified 3D models of taps and dies, which can be used for NC programming, simulation of the manufacturing processes and the avoidance of collision within machining processes. It is not intended to standardize the design of the cutting tool itself.

A cutting tool is used in a machine tool to remove material from a workpiece by a shearing action at the cutting edges of the tool. Cutting tool data that can be described by ISO 13399 (all parts) include, but are not limited to, everything between the workpiece and the machine tool. Information about inserts, solid tools, assembled tools, adaptors, components and their relationships can be represented by ISO 13399 (all parts). The increasing demand by the end user for 3D models for the purposes defined above is the basis for the development of this series of International Standards.

The objective of ISO 13399 (all parts) is to provide the means to represent information describing cutting tools in computer-sensible form, independent of any particular computer system. The representation will facilitate the processing and exchange of cutting tool data within and between different software systems and computer platforms, and support the application of these data in manufacturing planning, cutting operations and the supply of tools. The nature of this description makes it suitable not only for neutral file exchange, but also as a basis for implementing and sharing product databases and for archiving. The methods that are used for these representations are those developed by ISO/TC 184/SC 4 for the representation of product data by using standardized information models and reference dictionaries.

Dictionary entries are defined and identified by means of standard data that consist of instances of the EXPRESS entity data types defined in the common dictionary schema, resulting from a joint effort between ISO/TC 184/SC 4 and IEC SC3D, and its extensions defined in ISO 13584-24 and ISO 13584-25.

1 Scope

This part of ISO 13399 specifies a concept for the design of tool items, limited to any kind of taps and dies, together with the usage of the related properties and domains of values.

This part of ISO 13399 specifies a common way of designing simplified models that contain:

• definitions and identifications of the design features of thread-cutting taps, thread-forming taps and thread-cutting dies with solid cutting edges, with a link to the properties used;
• definitions and identifications of the internal structure of the 3D model that represents the features and properties of thread-cutting taps, thread-forming taps and thread-cutting dies with solid cutting edges.

The following are outside the scope of this part of ISO 13399:

• applications where these standard data may be stored or referenced;
• concept of 3D models for cutting tools;
• concept of 3D models for cutting items;
• concept of 3D models for other tool items not described in the scope of this part of ISO 13399;
• concept of 3D models for adaptive items;
• concept of 3D models for assembly and auxiliary items.

2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are indispensable to its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

Bibliography