※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。
www.iso.org/iso/foreword.html
この文書は、ISO/TC 201 技術委員会、表面化学分析、サブ委員会 SC 8, グロー放電分光法によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO/TS 15338:2009) を廃止し、置き換えます。
前版との主な変更点は以下の通りです。
- この文書はより一般的で、静的な極低温冷却電源だけでなく、高速流の高出力電源もカバーしています。
- この文書では、特定の機器タイプに固有の校正係数については言及しません。
1 スコープ
この文書では、グロー放電質量分析 (GD-MS) の操作と使用の手順を説明します。さまざまな製造元からいくつかの GD-MS システムが使用されており、この文書では、必要に応じて、それらの操作手順の違いについて説明します。
注この文書は、機器メーカーのマニュアルおよび推奨事項と併せて読むことを目的としています。
2 規範的参照
この文書には規範的な参照はありません。
3 用語と定義
この文書には用語や定義は記載されていません。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
参考文献
| 1 | ISO 5725-1, 測定方法と結果の精度 (真性と精度) — Part 1: 一般原則と定義 |
| 2 | ISO 5725-2, 測定方法と結果の精度 (真性と精度) - Part 2: 標準測定方法の再現性と再現性を決定するための基本方法 |
| 3 | ISO 5725-6, 測定方法と結果の精度 (真性と精度) — Part 6: 精度値の実践での使用 |
| 4 | ISO 1811, 表面化学分析 — 語彙 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 201, Surface chemical analysis, Subcommittee SC 8, Glow discharge spectroscopy.
This second edition cancels and replaces the first edition (ISO/TS 15338:2009), which has been technically revised.
The main changes compared to the previous edition are as follows:
- This document is more generic and covers not only the static, cryogenic cooled source, but also the fast flow high power source.
- This document no longer refers to calibration factors specific to one particular instrument type.
1 Scope
This document gives procedures for the operation and use of glow discharge mass spectrometry (GD-MS). There are several GD-MS systems from different manufacturers in use and this document describes the differences in their operating procedures when appropriate.
NOTE This document is intended to be read in conjunction with the instrument manufacturers’ manuals and recommendations.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| 1 | ISO 5725-1, Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| 2 | ISO 5725-2, Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| 3 | ISO 5725-6, Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| 4 | ISO 18115 (all parts), Surface chemical analysis — Vocabulary |