※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
適合性評価に関連する ISO 固有の用語や表現の意味の説明、および貿易の技術的障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照してください。 序文 - 補足情報
この文書を担当する委員会は、ISO/TC 190, 土壌品質、小委員会 SC 3, 化学的方法および土壌特性です。
この修正版では、文書のステータスが表紙の技術仕様に修正されました。さらに、ページ見出しが ISO/TS 16727:2013(E) に変更されました。
導入
ISO/TS 16727 は、CEN/TS 16175-2 「汚泥、処理された生物廃棄物および土壌 - 水銀の測定 - Part 2: 冷蒸気原子蛍光分析法 (CV-AFS)」に基づいており、これは CEN/TC 400プロジェクト委員会によって開発されました。 — 汚泥、生物廃棄物、土壌の分野における水平基準。
警告この技術仕様を使用する人は、通常の実験室での実践に精通している必要があります。この技術仕様は、その使用に関連する安全上の問題がある場合、そのすべてに対処することを目的とするものではありません。適切な安全衛生慣行を確立し、国の規制条件を確実に遵守することはユーザーの責任です。
重要この技術仕様に従って実施されるテストは、適切な訓練を受けたスタッフによって実行されることが絶対に重要です。
1 スコープ
この技術仕様は、冷蒸気原子蛍光分光法を使用して ISO 11466 または ISO 16729 に従って取得される、王水または汚泥、処理された生物廃棄物および土壌の硝酸分解物中の水銀の定量方法を指定します。作業範囲の下限は 0.003 mg/kg (乾物) です。
2 規範的参照
以下の文書は、全部または一部がこの文書で規範的に参照されており、その適用には不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
参考文献
| 1 | ISO 16772, 土壌品質 — 冷蒸気原子分光法または冷蒸気原子蛍光分光法による王水土壌抽出物中の水銀の測定 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 190, Soil quality, Subcommittee SC 3, Chemical methods and soil characteristics.
In this corrected version, the status of the document was amended to Technical Specification on the cover page. In addition, the page headings were changed to ISO/TS 16727:2013(E).
Introduction
ISO/TS 16727 is based upon CEN/TS 16175-2, Sludge, treated biowaste and soil — Determination of mercury — Part 2: Cold vapour atomic fluorescence spectrometry (CV-AFS), which was developed by CEN/TC 400, Project Committee — Horizontal standards in the fields of sludge, biowaste and soil.
WARNING Persons using this Technical Specification should be familiar with usual laboratory practice. This Technical Specification does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.
IMPORTANT It is absolutely essential that tests conducted according to this Technical Specification be carried out by suitably trained staff.
1 Scope
This Technical Specification specifies a method for the determination of mercury in aqua regia or nitric acid digests of sludge, treated biowaste and soil, obtained according to ISO 11466 or ISO 16729 using cold vapour atomic fluorescence spectrometry. The lower working range limit is 0,003 mg/kg (dry matter).
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 11465, Soil quality — Determination of dry matter and water content on a mass basis — Gravimetric method
- ISO 11466, Soil quality — Extraction of trace elements soluble in aqua regia
- ISO 16729, Soil quality — Digestion of nitric acid soluble fractions of elements
- ISO 3696, Water for analytical laboratory use — Specification and test methods
Bibliography
| 1 | ISO 16772, Soil quality — Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry |