※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
ISO は、この文書の実装に特許の使用が含まれる可能性があることに注意を促しています。 ISO は、請求された特許権に関する証拠、有効性、または適用可能性に関していかなる立場もとりません。この文書の発行日の時点で、ISO はこの文書の実装に必要となる可能性のある特許の通知を受領しています。ただし、実装者は、これが www.iso.org/patents で入手可能な特許データベースから取得できる最新の情報を表していない可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html
この文書は、ISO/TC 61 技術委員会、プラスチック、小委員会 SC 6, 老化、耐薬品性、および環境耐性によって作成されました。
1 スコープ
この文書は、無電極プラズマ放射線源を使用した光劣化促進試験の方法を規定しています。この手法は、材料や製品の光劣化による短期間での劣化や故障を評価・予測するのに適しています。
試料の調製と結果の評価は、特定の材料に関する他の国際規格でカバーされています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 4582, プラスチック — ガラスフィルターを通した太陽放射、自然風化、または実験室放射線源に曝露した後の色の変化と特性の変化の測定
- ISO 4892-1, プラスチック — 実験室の光源への暴露方法 — Part 1: 一般的なガイダンス
- ISO 9370, プラスチック — 耐候性試験における放射暴露の機器による測定 — 一般的なガイダンスおよび基本的な試験方法
3 用語と定義
この文書の目的としては、ISO 4892-1 および以下に示されている用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
無電極プラズマランプ
金属電極を使用せずに、ガラス球内のガスを介して高周波または電磁場によって放射線を生成するガス放電ランプ
参考文献
| 1 | CIE 241, 産業用途に推奨される基準太陽光スペクトル |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 6, Ageing, chemical and environmental resistance.
1 Scope
This document specifies methods for an accelerated photo-degradation test using an electrodeless plasma radiation source. This method is suitable for evaluating or predicting degradation and failure caused by the photo-degradation of a material and a product within a short-term period.
Specimen preparation and evaluation of the results are covered in other International Standards for specific materials.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 4582, Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
- ISO 4892-1, Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
- ISO 9370, Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 4892-1 and the following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1
electrodeless plasma lamp
gas discharge lamp that produces radiation by radio frequency or electromagnetic field through the gas in a glass bulb without using metal electrodes
Bibliography
| 1 | CIE 241, Recommended reference solar spectra for industrial applications |