※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
ISO は、この文書の実装に特許の使用が含まれる可能性があることに注意を促しています。 ISO は、請求された特許権に関する証拠、有効性、または適用可能性に関していかなる立場もとりません。この文書の発行日の時点で、ISO はこの文書の実装に必要となる可能性のある特許の通知を受け取っていません。ただし、実装者は、これが www.iso.org/patents で入手可能な特許データベースから取得できる最新の情報を表していない可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html
この文書は、ISO/TC 102 技術委員会、鉄鉱石および直接還元鉄、小委員会 SC 2, 化学分析によって作成されました。
ISO 9516 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
警告この文書には危険な物質、操作、および機器が含まれる可能性があります。この文書は、その使用に関連するすべての安全上の問題に対処することを目的とするものではありません。適切な健康と安全の実践を確立し、使用前に規制上の制限の適用性を判断することは、この文書のユーザーの責任です。
1 スコープ
この文書では、鉄鉱石中のさまざまな元素を測定するための波長分散蛍光 X 線手順を説明します。この方法は、鉱物の種類に関係なく、鉄鉱石に適用できます。
2 規範的参照
以下の文書は、その内容の一部がこの文書の要件を構成するという形で本文中で参照されています。日付が記載されている参照については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
この文書の目的には、ISO 11323 で与えられる用語と定義が適用されます。
ISO および IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
参考文献
| 1 | ISO Guide 35, 参考資料 — 均一性と安定性の特性評価と評価に関するガイダンス |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 102, Iron ore and direct reduced iron, Subcommittee SC 2, Chemical analysis.
A list of all parts in the ISO 9516 series can be found on the ISO website.
WARNING This document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate health and safety practices and determine the applicability of regulatory limitations prior to use.
1 Scope
This document sets out a wavelength dispersive X-ray fluorescence procedure for the determination of various elements in iron ores. The method is applicable to iron ores regardless of mineralogical type.
2 Normative references
The following documents are referred to in the text in such a way that some of all of their content constitutes requirements of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 648, Laboratory glassware — Single-volume pipettes
- ISO 1042, Laboratory glassware — One-mark volumetric flasks
- ISO 2596, Iron ores — Determination of hygroscopic moisture in analytical samples — Gravimetric, Karl Fischer and mass-loss methods
- ISO 3082, Iron ores — Sampling and sample preparation procedures
- ISO 3696, Water for analytical laboratory use — Specification and test methods
- ISO 7764, Iron ores — Preparation of predried test samples for chemical analysis
- ISO 8655-2, Piston-operated volumetric apparatus — Part 2: Pipettes
- ISO 11323, Iron ore and direct reduced iron — Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 11323 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses.
Bibliography
| 1 | ISO Guide 35, Reference materials — Guidance for characterization and assessment of homogeneity and stability |