※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www.iso.org/iso/foreword.html を参照してください。
この文書は、技術委員会 ISO/TC 44, 溶接および関連プロセス、小委員会 SC 5, 溶接部の試験および検査によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 10863:2011) を廃止し、置き換えます。
前版との主な変更点は以下の通りです。
- ドキュメント全体が最新のものに更新されました。 ISO 22232 シリーズが考慮されています。
- 第 3 条が更新されました。
- 図 1 から図 6 が追加されました。
- 図 B.1 から図 B.18 までが更新されました。
ISO/TC 44 文書の公式解釈はここで, このページから入手できます: https://committee.iso.org/sites/tc44/home/interpretation.html
1 スコープ
この文書は、最小厚さ 6 mm の金属材料の溶融溶接継手の半自動または全自動超音波検査への飛行時間回折 (TOFD) 技術の適用を規定しています。
これは、プレート、パイプ、容器の単純な形状の完全溶け込み溶接継手に適用されますここで, 溶接部と母材は両方とも低合金炭素鋼です。指定され、適切な場合、TOFD は超音波減衰 (特に散乱による減衰) が低い他の種類の材料にも使用できます。
この文書で材料依存の超音波パラメータが指定されている場合、それらは縦波の音速が (5 920 ± 50) m/s, 横波の音速が (3 255 ± 30) m/s である鋼に基づいています。異なる速度で材料を試験するときは、この事実を考慮する必要があります。
この文書は ISO 16828 を参照し、溶融溶接接合部の不連続部の検出、位置、サイズ設定および特性評価に関する TOFD の特定の機能と制限に関するガイダンスを提供します。 TOFD は、スタンドアロンの方法として、または他の非破壊検査 (NDT) 方法や技術と組み合わせて、製造検査や使用中検査に使用できます。
この文書では、ISO 17635 に従って、テストの信頼性の向上レベルに対応する 4 つのテスト レベル (A, B, C, D) を指定します。テストレベルの選択に関するガイダンスが提供されます。
この文書は、承認を目的とした TOFD 指標の評価を許可します。この評価は、生成された TOFD 画像内の送信、反射、回折された超音波信号の評価に基づいています。
この文書には、不連続性の許容レベルは含まれていません。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
この文書の目的のために、ISO 5577 および以下に示されている用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
飛行時間型回折像
TOFD画像
飛行時間回折セットアップ (3.3) を 移動しながら、隣接する A スキャンを収集することによって構築された 2 次元画像
注記 1: A スキャンの信号振幅は、通常、グレースケール値で表されます。
3.2
飛行時間型回折表示
TOFD表示
さらなる評価が必要な可能性がある 飛行時間回折画像 (3.1) のパターンまたは乱れ
3.3
飛行時間型回折のセットアップ
TOFDのセットアップ
プローブの配置は、プローブの特性 (周波数、プローブ要素のサイズ、ビーム角度、波のモードなど) および プローブの中心間隔によって定義されます (3.6)
3.4
ビーム交点
2つの主ビーム軸の交点
3.5
横波
送信プローブから受信プローブまで最短経路を伝播する縦波
3.6
サンプル中心分離
PCS
2つのプローブのインデックスポイント間の距離
注記 1:曲面上に配置された 2 つのプローブの PCS は、2 つのプローブ指標点間の直線の幾何学的な距離であり、表面に沿って測定された距離ではありません。
3.7
オフセットスキャン
溶接軸に平行にスキャンしますここで, ビーム交点 (3.4) は 溶接の中心線上にありません
参考文献
| 1 | ISO 15626, 溶接部の非破壊検査 — 飛行時間回折技術 (TOFD) — 許容レベル |
| 2 | ISO 16810, 非破壊検査 — 超音波検査 — 一般原則 |
| 3 | ISO 17635, 溶接部の非破壊検査 — 金属材料の一般規則 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 5, Testing and inspection of welds.
This second edition cancels and replaces the first edition (ISO 10863:2011), which has been technically revised.
The main changes compared to the previous edition are as follows:
- the whole document has been updated to the state of the art; ISO 22232 series has been taken into account;
- Clause 3 has been updated;
- Figure 1 to Figure 6 have been added;
- Figure B.1 to Figure B.18 have been updated.
Official interpretations of ISO/TC 44 documents ここで, they exist, are available from this page: https://committee.iso.org/sites/tc44/home/interpretation.html .
1 Scope
This document specifies the application of the time-of-flight diffraction (TOFD) technique to the semi- or fully automated ultrasonic testing of fusion-welded joints in metallic materials of minimum thickness 6 mm.
It applies to full penetration welded joints of simple geometry in plates, pipes, and vessels ここで, both the weld and the parent material are low-alloyed carbon steel. Where specified and appropriate, TOFD can also be used on other types of materials that exhibit low ultrasonic attenuation (especially that due to scatter).
Where material-dependent ultrasonic parameters are specified in this document, they are based on steels having a sound velocity of (5 920 ± 50) m/s for longitudinal waves and (3 255 ± 30) m/s for transverse waves. It is necessary to take this fact into account when testing materials with a different velocity.
This document makes reference to ISO 16828 and provides guidance on the specific capabilities and limitations of TOFD for the detection, location, sizing and characterization of discontinuities in fusion-welded joints. TOFD can be used as a stand-alone method or in combination with other non-destructive testing (NDT) methods or techniques, for manufacturing inspection, and for in-service inspection.
This document specifies four testing levels (A, B, C, D) in accordance with ISO 17635 and corresponding to an increasing level of testing reliability. Guidance on the selection of testing levels is provided.
This document permits assessment of TOFD indications for acceptance purposes. This assessment is based on the evaluation of transmitted, reflected and diffracted ultrasonic signals within a generated TOFD image.
This document does not include acceptance levels for discontinuities.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 5577, Non-destructive testing — Ultrasonic testing — Vocabulary
- ISO 9712, Non-destructive testing — Qualification and certification of NDT personnel
- ISO 16828, Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
- ISO 17640, Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
- ISO 22232-1 1 , Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 1: Instruments
- ISO 22232-2 2 , Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 2: Probes
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5577 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
time-of-flight diffraction image
TOFD image
two-dimensional image, constructed by collecting adjacent A-scans while moving the time-of-flight diffraction setup (3.3)
Note 1 to entry: The signal amplitude of the A-scans is typically represented by grey-scale values.
3.2
time-of-flight diffraction indication
TOFD indication
pattern or disturbance in the time-of-flight diffraction image (3.1) which can need further evaluation
3.3
time-of-flight diffraction setup
TOFD setup
probe arrangement defined by probe characteristics (e.g. frequency, probe element size, beam angle, wave mode) and probe centre separation (3.6)
3.4
beam intersection point
point of intersection of the two main beam axes
3.5
lateral wave
longitudinal wave traveling the shortest path from transmitter probe to receiver probe
3.6
probe centre separation
PCS
distance between the index points of the two probes
Note 1 to entry: The PCS for two probes located on a curved surface is the straight-line, geometric separation between the two probe index points and not the distance measured along the surface.
3.7
offset scan
scan parallel to the weld axis ここで, the beam intersection point (3.4) is not on the centreline of the weld
Bibliography
| 1 | ISO 15626, Non-destructive testing of welds — Time-of-flight diffraction technique (TOFD) — Acceptance levels |
| 2 | ISO 16810, Non-destructive testing — Ultrasonic testing — General principles |
| 3 | ISO 17635, Non-destructive testing of welds — General rules for metallic materials |