この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 3 に規定されている規則に従って起草されています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
ISO 10882 のこのパートの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
国際規格 ISO 10882-2 は、欧州標準化委員会 (CEN) が、ISO 技術委員会 TC 44, 溶接および関連プロセス、小委員会 SC 9, 健康および安全と協力して、ISO とCEN (ウィーン協定)
この規格のテキスト全体を通して、「...この欧州規格...」を読み、「...この国際規格...」を意味します。
ISO 10882 は、溶接および関連プロセスにおける健康と安全 - オペレーターの呼吸ゾーンでの浮遊粒子およびガスのサンプリングという一般的なタイトルの下に、次の部分で構成されています。
- Part 1: 浮遊粒子のサンプリング
- Part 2: ガスのサンプリング
ISO 10882 のこの部分の附属書 A および B は、情報提供のみを目的としています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 10882 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 10882-2 was prepared by the European Committee for Standardization (CEN) in collaboration with ISO Technical Committee TC 44, Welding and allied processes, Subcommittee SC 9, Health and safety, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
Throughout the text of this standard, read"...this European Standard..." to mean"...this International Standard...".
ISO 10882 consists of the following parts, under the general title Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone:
- Part 1: Sampling of airborne particles
- Part 2: Sampling of gases
Annexes A and B of this part of ISO 10882 are for informatin only.