この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
このドキュメントでは、意図的に応力集中を導入することなく、周囲温度で金属試験片の軸方向、一定振幅、力制御、疲労試験を実施するための条件を指定します。このドキュメントを使用してテストを行う目的は、さまざまな応力比で、加えられた応力と、硬度や微細構造などの特定の材料条件での破損までのサイクル数との関係などの疲労情報を提供することです。
円形および長方形断面の試験片の形状、準備、および試験について説明していますが、コンポーネント試験およびその他の特殊な形式の試験は、この文書には含まれていません。
注記 1ノッチ付き試験片の形状とサイズが標準化されていないため、ノッチ付き試験片の疲労試験はこの文書の対象外です。ただし、このドキュメントに記載されている疲労試験手順は、そのようなノッチ付き試験片の疲労試験に適用できます。
注記 2このドキュメントでは、エンジニアリング ストレスが使用されています。工学的応力は、試験温度での試験片の断面積に対する軸方向の力の商、S = 力/面積として定義されます。
1 Scope
This document specifies the conditions for conducting axial, constant-amplitude, force-controlled, fatigue tests at ambient temperature on metallic specimens, without deliberately introduced stress concentrations. The object of testing while employing this document is to provide fatigue information, such as the relation between applied stress and number of cycles to failure for a given material condition, such as hardness and microstructure, at various stress ratios.
While the form, preparation and testing of specimens of circular and rectangular cross-section are described, component testing and other specialized forms of testing are not included in this document.
NOTE 1 Fatigue tests on notched specimens are not covered by this document since the shape and size of notched test pieces have not been standardized. However, fatigue-test procedures described in this document can be applied to fatigue tests of such notched specimens.
NOTE 2 Throughout this document, the engineering stress is employed. Engineering stress is defined as the quotient of the axially applied force to the cross-sectional area of the test specimen, S = Force/Area, at the test temperature.