※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における ISO の WTO 原則への準拠に関する情報については、次の URL を参照して ください 。
この文書を担当する委員会は、ISO/TC 83, スポーツおよびその他のレクリエーション施設および設備、小委員会 SC 4, スノースポーツ設備です。
この第 3 版は、技術的に改訂された第 2 版 (ISO 11087:2004) を取り消して置き換えるものです。
1 スコープ
この国際規格は、スキー ブレーキとビンディング ストラップの要件を指定します。
これは、スキーのリリース後にスキーによって引き起こされる怪我のリスクを軽減するために使用されるアルパイン リテンション デバイスに適用されます。
2 参考文献
以下のドキュメントの全体または一部は、このドキュメントで規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
3.1
スキーブレーキ
スキービンディングに組み込まれ、スキービンディングの解放後に外れたスキーを減速させるように設計された、アルペンスキー用の保持装置
注記 1: 一体化されたスキーブレーキは最新技術を表しています。
3.2
もちろん
転倒後にスキーヤーが通過できる領域。長さは、転倒点から停止までのスキーヤーの制動距離に対応し、幅によって定義されます。
参考文献
| [1] | ISO 6289:2003, スキー - 語彙 |
| [2] | ISO 9523, 大人用ツーリング スキー ブーツ — ツーリング スキー ビンディングとのインターフェース — 要件と試験方法 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 83, Sports and other recreational facilities and equipment, Subcommittee SC 4, Snowsports equipment.
This third edition cancels and replaces the second edition (ISO 11087:2004), which been technically revised.
1 Scope
This International Standard specifies the requirements for ski brakes and binding straps.
It applies to alpine retention devices, which are used to reduce the risk of injury, caused by the ski after the ski's release.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies
- ISO 554, Standard atmospheres for conditioning and/or testing — Specifications
- ISO 5355, Alpine ski-boots — Safety requirements and test methods
- ISO 8364, Alpine skis and bindings — Binding mounting area — Requirements and test methods
- ISO 9462, Alpine ski-bindings — Safety requirements and test methods
- ISO 9838, Alpine ski-bindings — Test soles for ski-binding tests
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
ski brake
retention device for alpine skiing which is integrated into the ski binding and which is designed to slow down a ski which has come off after the release of a ski binding
Note 1 to entry: Integrated ski brakes represent the state of the art.
3.2
course of fall
area that can be passed over by a skier after a fall, defined by the length of which corresponds to the braking distance of the skier measured between the point of fall and the stoppage, and the width
Bibliography
| [1] | ISO 6289:2003, Skis — Vocabulary |
| [2] | ISO 9523, Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods |