この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 3126, プラスチック配管システム - プラスチック部品 - 寸法の決定
- ISO 4427-1:2007, プラスチック配管システム — 給水用のポリエチレン (PE) パイプおよび継手 — Part 1: 一般
- ISO 4427-2:2007, プラスチック配管システム — 給水用のポリエチレン (PE) パイプおよび継手 — Part 2: パイプ
- ISO 4427-3, プラスチック配管システム — 給水用のポリエチレン (PE) パイプおよび継手 — Part 3: 継手
- ISO 4427-5:2007, プラスチック配管システム — 給水用のポリエチレン (PE) パイプおよび継手 — Part 5: システムの目的への適合性
- ISO 11298-1:2018, 地下給水ネットワーク改修のためのプラスチック配管システム — Part 1: 概要
- ISO 12176-1, プラスチックパイプおよび継手 — ポリエチレンシステムを融着接合するための機器 — Part 1: 突合せ融着
- ISO 12176-2, プラスチックパイプおよび継手 — ポリエチレンシステムを融着接合するための機器 — Part 2: 電気融着
- EN 12201-1, 加圧下の給水、排水および下水用プラスチック配管システム — ポリエチレン (PE) — Part 1: 一般
- EN 12201-2:2011, 加圧下の給水、排水および下水用プラスチック配管システム — ポリエチレン (PE) — Part 2: パイプ
- EN 12201-3, 加圧下の給水、排水および下水用プラスチック配管システム — ポリエチレン (PE) — Part 3: 継手
- EN 12201-4, 給水用プラスチック配管システム — ポリエチレン (PE) — Part 4: バルブ
- EN 12201-5, 加圧下の給水、排水および下水用プラスチック配管システム — ポリエチレン (PE) — Part 5: システムの目的への適合性
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3126, Plastics piping systems — Plastics components — Determination of dimensions
- ISO 4427-1:2007, Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General
- ISO 4427-2:2007, Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes
- ISO 4427-3, Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings
- ISO 4427-5:2007, Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 5: Fitness for purpose of the system
- ISO 11298-1:2018, Plastics piping systems for renovation of underground water supply networks — Part 1: General
- ISO 12176-1, Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
- ISO 12176-2, Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
- EN 12201-1, Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General
- EN 12201-2:2011, Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes
- EN 12201-3, Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings
- EN 12201-4, Plastics piping systems for water supply — Polyethylene (PE) — Part 4: Valves
- EN 12201-5, Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system