※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 11412 は、技術委員会 ISO/TC 47, 化学、小委員会 SC 7, 酸化アルミニウム、氷晶石、フッ化アルミニウム、フッ化ナトリウム、アルミニウム産業向け炭素質製品によって作成されました。
1 スコープ
この国際規格は、か焼コークスの含水量を、断片化された粒状の炭素および黒鉛材料 (固形物) の質量パーセントとして測定する方法を規定しています。
この方法は、DIN 51904:1981, 炭素材料の試験 - 水分含有量の測定 - 固体に記載されている方法に基づいています。
2 参考文献
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 5725-1:1994, 測定方法と結果の精度 (真実性と精度) — Part 1: 一般原則と定義。
- ISO 6375:1980, アルミニウム製造用炭素質材料 — 電極用コークス — サンプリング。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 11412 was prepared by Technical Committee ISO/TC 47, Chemistry, Subcommittee SC 7, Aluminium oxide, cryolite, aluminium fluoride, sodium fluoride, carbonaceous products for the aluminium industry.
1 Scope
This International Standard specifies a method for the determination of the water content of calcined coke as a percentage by mass of the fragmented, granular carbon and graphite material (solid matter).
The method is based on that described in DIN 51904:1981, Prüfung von Kohlenstoffmaterialien – Bestimmung des Wassergehaltes – Feststoffe.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 5725-1:1994, Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions.
- ISO 6375:1980, Carbonaceous materials for the production of aluminium — Coke for electrodes — Sampling.