※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 3 に規定されている規則に従って起草されています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
ISO 11807 のこのパートの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
国際規格 ISO 11807-2 は、技術委員会 ISO/TC 172, 光学および光学機器、小委員会 SC 9, 電気光学システムによって作成されました。
ISO 11807 は、一般的なタイトルIntegrated optics — Vocabularyの下にある次の部分で構成されています。
- Part 1: 基本用語と記号
- Part 2: 分類で使用される用語
序章
集積光デバイスは、ユーザー指向の基準に基づいて 3 つの主要な分野を使用して分類されます。以下のテキストでは、属性「統合光学」は通常省略されます。
分類の最初の基準は、デバイスがシングルモードまたはマルチモードのコンポーネントである可能性があるということです。
第 2 に、集積光デバイスは、構成の複雑さに従って分類されます (箇条 2 および図 1: 要素、チップ、およびデバイスを参照)
分類の 3 番目の基準は、コンポーネントの機能です。 2.2 では、コンポーネントは機能の一般的な定義 (パッシブ、制御可能、アクティブ) に従って分類されます。 2.3 では、機能基準に従って、より具体的な下位分類が行われます。機能分類は集積光学素子に対して定義されていますが、チップやデバイスに対しても同様の方法で使用できます。後者の場合、分類は機能的に最も複雑な要素 (つまり、受動的、制御可能、能動的) を指します。
1 スコープ
ISO 11807 のこのパートでは、集積光学素子、集積光学チップ、および集積光学デバイスの分類で使用される用語を定義しています。これらの用語は、たとえば、光通信やセンサーの分野で適用されます。
注基本的な用語と定義は、ISO 11807-1 に記載されています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 11807 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 11807-2 was prepared by Technical Committee ISO/TC 172, Optics and optical instruments, Subcommittee SC 9, Electro-optical systems.
ISO 11807 consists of the following parts, under the general title Integrated optics — Vocabulary:
- Part 1: Basic terms and symbols
- Part 2: Terms used in classification
Introduction
Integrated optical devices are classified using three major fields based on user-oriented criteria. In the following text, the attribute “integrated optical” will usually be omitted.
The first criterion for classification is that the devices may be single-mode or multi-mode components.
Secondly, integrated optical devices are classified according to complexity of the configuration (see clause 2 and Figure 1: elements, chips, and devices).
The third criterion for classification is the function of the component. In 2.2, components are classified according to a general definition of the function, (passive, controllable, active). In 2.3, more specific subclassification is made according to functional criteria. The functional classification is defined for integrated optical elements, but can also be used in a similar manner for chips and devices. In the latter cases, the classification refers to the element of highest functional complexity (i.e. passive, controllable, active).
1 Scope
This part of ISO 11807 defines terms used in the classification of integrated optical elements, integrated optical chips and integrated optical devices, which find applications, for example, in the fields of optical communications and sensors.
NOTE Basic terms and definitions are given in ISO 11807-1.