この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
適合性評価に関連する ISO 固有の用語や表現の意味の説明、および貿易の技術的障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照してください。 序文 - 補足情報
この文書を担当する委員会は、ISO/TC 171, 文書管理アプリケーション、サブ委員会 SC 1, 品質です。
ISO 12653 は、「電子画像処理 — オフィス文書のスキャンのテスト対象」という一般タイトルのもと、次の部分で構成されています。
- Part 1: 特徴
- Part 2: 使用方法
- Part 3: 低解像度アプリケーションで使用するテスト ターゲット
導入
ISO 12653 のこの部分では、最大 300 dpi の文書をスキャンするように設定されたオフィス文書スキャン システムからの出力の品質を評価する手順について説明します。このシステムは、白黒、グレースケール、またはカラーでスキャンするために使用できます。
テストチャートとターゲットは、顕微鏡写真やファクシミリ送信用にすでに存在していますが、これらはこれらの分野に特有のものであり、文書スキャンシステムのユーザーのニーズを満たしていません。
ISO 12653-1 は、一般的なスキャン システムで使用するテスト ターゲットを指定し、そのパフォーマンスを評価し、システムのパフォーマンス制限を確立できるようにします。その使用方法は ISO 12653-2 で規定されています。
1 スコープ
ISO 12653 のこの部分では、低解像度の反射スキャン システムからの出力品質の長期にわたる一貫性を評価するためのテスト目標を指定しています。
これは、ハーフトーンの有無にかかわらず、白黒またはカラーのオフィス文書に使用される白黒およびカラー スキャナの出力品質の評価に適用できます。
透明または半透明の文書のスキャンに使用されるスキャナーには適用されません。
2 規範的参照
以下の文書は、全部または一部がこの文書で規範的に参照されており、その適用には不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
ISO 5-4:2009, 写真およびグラフィック技術 — 濃度測定 — Part 4: 反射濃度の幾何学的条件。
ISO 446:2004, 顕微鏡写真 - ISO キャラクターおよび ISO テスト チャート No. 1 — 説明と使用法。
ISO 3334:2006, 顕微鏡写真 — ISO 解像度テスト チャート No 2 — 説明と使用法。
ISO 12653-1:2000, 電子イメージング — オフィス文書の白黒スキャンのテスト対象 — Part 1: 特性。
ISO 12653-2:2000, 電子イメージング — オフィス文書の白黒スキャンのテスト対象 — Part 2: 使用方法。
ISO 12653-2:2000/ Cor:1:2002
3 用語と定義
この文書の目的としては、ISO 12651 および以下に示されている用語と定義が適用されます。
3.1
テスト要素
ターゲット上に表現されたパターン
例:
ミリメートルスケール、グレースケール、円。
3.2
連続音
異なる濃度の領域によって表される文書内の色調の変化
3.3
低解像度のアプリケーション
最大 300 dpi をスキャンするように構成されたスキャン システム
参考文献
1 | ISO 12651-1:2012, 電子文書管理 - 語彙 - Part 1: 電子文書のイメージング。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 171, Document management applications, Subcommittee SC 1, Quality.
ISO 12653 consists of the following parts, under the general title Electronic imaging — Test target for scanning of office documents:
- Part 1: Characteristics
- Part 2: Method of use
- Part 3: Test target for use in lower resolution applications
Introduction
This part of ISO 12653 describes procedures for evaluating the quality of output from office document scanning systems that are set to scan documents up to 300 dpi. The systems can be used to scan in black and white, in greyscale, or in colour.
Test charts and targets already exist for micrographics and facsimile transmission but they are specific to these said fields and do not meet the needs of the users of document scanning systems.
ISO 12653-1 specifies a test target for use in general scanning systems, to enable their performance to be evaluated and to establish performance limits of the systems. Its method of use is specified in ISO 12653-2.
1 Scope
This part of ISO 12653 specifies a test target for assessing the consistency of the output quality over time from lower resolution reflection scanning systems.
It is applicable to assessing the output quality of black-and-white and colour scanners used for black-and-white or colour office documents, with or without half tone.
It does not apply to scanners used for the scanning of transparent or translucent documents.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 5-4:2009, Photography and graphic technology — Density measurements — Part 4: Geometric conditions for reflection density.
ISO 446:2004, Micrographics — ISO character and ISO test chart No. 1 — Description and use.
ISO 3334:2006, Micrographics — ISO resolution test chart No 2 — Description and use.
ISO 12653-1:2000, Electronic imaging — Test target for the black-and-white scanning of office documents — Part 1: Characteristics.
ISO 12653-2:2000, Electronic imaging — Test target for the black-and-white scanning of office documents — Part 2: Method of use.
ISO 12653-2:2000/ Cor:1:2002
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 12651 and the following apply.
3.1
test element
pattern represented on a target
EXAMPLE:
Millimetre scale, grey scale, circle.
3.2
continuous tone
tonal variation in a document represented by areas of different density
3.3
lower resolution application
scanning system that is configured to scan up to 300 dpi
Bibliography
1 | ISO 12651-1:2012, Electronic document management — Vocabulary — Part 1: Electronic document imaging. |